This module allows the control of low...
This module allows the control of low consumption bulbs (<4W) with the Nano Dimmer micromodule
Warning: Last items in stock!
Varying the brightness of energy-saving lamps is complicated: there are many different technologies incorporated in modern lamps.
That's why low-light lights sometimes flicker or stay on. The Bypass works with the Nano Dimmer to eliminate the signals from its power line that cause the low consumption bulbs to flicker.
If your switch controls low-voltage lighting that uses less than 4 watts, it is necessary to use the bypass when using the Nano Dimmer.
There are different types of low power bulbs that you can have in your home; The Bypass has been designed to work with most of them. It has been designed to prevent most of the bulbs from blinking, including LEDs and static and adjustable fluorescent lamps.
Bypass to vary the brightness of the lamp with a very low consumption
To avoid the flickering of the phenomena or the LED bulbs that remain slightly on after the extinction
Use with Aeotec Nano Dimmer micromodule dimmer
It is installed in parallel with the lamp
TECHNICAL CHARACTERISTICS :
Power supply: 230V +/- 10% 50Hz
Dimensions: 19.2 x 26.7 x 10.6 mm
Operating temperature: 0-40 ° C
Certifications: FCC, UL, CE, ROHS