WiDom Smart Double Switch - Z-Wave + double relay micromodule

The WiDom Smart Double Switch allows you to turn on and off at any time and regardless of the appliances, lights or any device connected to the electrical network of the circuit that controls the relay. Fantastic, right? The house comes alive and responds to every need, with this small Z-Wave module and life is more comfortable. In addition to controlling the operation of two charges or electrical devices or lights simultaneously, with the WiDom Smart Double Switch you can also control its consumption, from the switch or remotely.

• Switching on and off small appliances
• Turning on / off lights and other remote charges
• Control of energy consumption

The WiDom Smart Double Switch is available in two versions, to better adapt to your electrical system. Upon request, we can provide you with a version for the control of the Neutral (N), instead of the usual one, which is to control the Phase (L)

AUTONOMOUS AND INTELLIGENT MULTICHANNEL

It has two independent channels that can be controlled individually.
You can autonomously control other devices both single channel and multichannel
For example, open / close blinds and simultaneously adjust the lights, or turn on / off remote loads.

UNIQUE IN ITS SIMPLICITY

Controllable with buttons or switches. It is simply possible to associate a button to one channel and a switch to another.
Multiclic recognition with local load control and associated devices independently
Timing management in on and off mode for both channels independently

UNIQUE FOR ITS SIZE

The smallest micromodule Z-Wave devices in the world. Our plug & play modules fit into any type of junction box and are easier to install.

CONSUMER METER

WiDom modules are equipped with very precise functions to measure energy consumption.

EASY TO CONTROL

They can be operated with buttons or switches, from computers, tablets or smartphones, depending on the needs of the moment.

MORE SIMPLE INSTALLATION THANKS TO YOUR RGB LED

An RGB LED provides visual information about its status and the status of the operations that are being performed. In this way, you will always know if the device has been connected correctly, if it is included in the Z-Wave network and if it is working.

- Advantage:

Greater durability

Using zero-pass relays reduces the electrical voltage of the relay contacts and guarantees a longer life of the devices.

Protection and security

WiDom devices use an S2 security system, with advanced encryption, which provides advanced security features and eliminates the risk of hacking.

Savings - Low power consumption

WiDom devices have the lowest power consumption among similar devices in the market.

Easy installation - Simplified inclusion and exclusion

The inclusion / exclusion in the Z-Wave network can be initiated not only by the controller, but also by the device with any sequence of clicks on the integrated button.

Easy installation - Test electrical connections

Before pairing the device with the help of the integrated button and LED, you can check if the electrical connection was successful

Multiclic recognition

Control of the local load and of the devices associated independently to the recognition of the sequence of clicks. For example, you can control local loads with a single click and the associated devices with a double click.

Technical characteristics:

Power supply: 230 VAC ± 10% 50/60 Hz
Maximum load: Resistive load: 8A per channel; 10A for both channels
Temperature limit: 105 ° C
Working temperature: -10 ° - 40 ° C
Radio protocol: Wave Z 868.4 MHz
Maximum distance: up to 100 m outdoors - up to 40 m indoors
Dimensions: 37x37x17 mm
Consumption: <1 Watt
Actuator Element: Relay
Compliance: CE, RoHs
Degree of protection: IP20

Other specifications:

Software update - You can update the device firmware in absolute autonomy via "Over the Air" (OTA) without removing the devices from their physical location.