Secure SES 002 is a temperature probe to measure temperature in the external wall of a tube or a tank with hot liquid inside.
Probe for measuring the temperature of tanks, tanks or a floor heating system.
Two-channel Z-Wave actuator for boiler type relay switch from manufacturer Secure
Wireless wall thermostat kit with LCD display plus actuator. The kit consists of the SRT321 Thermostat + Actuator SSR303 both of Z-Wave technology. The SECURE SRT322 kit is a system for controlling radiator heating in general, even very suitable for underfloor heating by hot water. With gas boilers, gas-oil, etc.
The Secure SRT321 wall thermostat, powered by batteries, allows a large wheel to be used in the device to predetermine the desired temperature in the room.
Secure SES302 is the temperature sensor that allows measurements through auxiliary cables, NTC, sensors for tube and tank ...
Switch timer-count 30 or 60 or 120 minutes Secure SIR321 Z-Wave technology that allows the ignition of any load timing its operation 30, 60 or 120 minutes, depending on what we have selected easily through its pushbutton
Room temperature sensor for the interior of Z-Wave technology. Optionally it can be used together with wired probes.
Wireless Z-Wave + actuator for switching loads of 3 A / 230 V. It is used to control hot water boilers or magnetic valves
The Z-Wave thermostat with built-in relay Secure SRT323 is a battery-operated wall-mounted room thermostat. The thermostat integrates a relay to control the load control and acts directly on the heating boiler.