Micromodule regulator or dimmer of...
Micromodule regulator or dimmer of technology Z-Wave of VERY small size and with a very low consumption. It has measurement of electrical consumption. Simple installation, valid for dimmable lamp and fan regulation. With advanced technology to avoid flickering.
Warning: Last items in stock!
WiDom Smart TE Dimmer is a "wall device" that controls the level of brightness and / or fan speed. A universal device that controls the light intensity of all types of dimmable or dimmable lights , including LED and energy-saving lamps. The Smart TE Dimmer includes the ON / OFF control option for non-adjustable loads.
The WiDom Smart TE Dimmer is very easy to install and works with both push buttons and fixed position switches.
It works on any Z-Wave network with other devices and controllers certified by Z-Wave / Z-Wave Plus from any manufacturer. As it is a constantly powered node, the WiDom Smart TE Dimmer will act as a repeater to increase the reliability of the Z-Wave mesh network.
The WiDom Smart TE Dimmer controls the level of brightness or intensity of lights and lamps, including LEDs and energy- saving lamps, but they can also regulate the speed of a fan. How does it improve our life? Making it much more comfortable, because with this small device you can change the atmosphere of the house with a single click. Not only that, the Smart TE Dimmer measures the consumption of lamps and fans, and guides you to a daily energy-saving exercise.
The characteristics that make it special.
CONTROL ALL TYPES OF LAMPS .
BRIGHTNESS CONTROL, WITHOUT BLINKING
Adjust the brightness through the external switch or button and through the controller. You can adjust the maximum and minimum brightness and the on or off timing. There will be no flickering even at the lowest loads.
UNIQUE FOR ITS SIZE
The smallest Z-Wave devices in the world. Our plug & play modules fit perfectly in any type of junction box and are easier to install.
EASY TO CONTROL
They can be managed with push buttons, switches or switches. From a computer, tablet or smartphone, depending on your specific needs.
PRECISE MEASUREMENT OF POWER
WiDom modules are equipped with very precise functions to measure energy consumption.
MORE SIMPLE INSTALLATION THANKS TO YOUR RGB LED
An RGB LED provides visual information on the status of the device and the operations performed, very useful in the installation.
Easy installation - Simplified inclusion and exclusion of devices
The inclusion / exclusion in the Z-Wave network can be initiated not only by the controller, but also by the device with any sequence of clicks on the integrated button.
WiDom devices use an S2 protection system, with advanced cryptography, which provides advanced protection features and eliminates the risk of hacking.
Savings - Ultra Low Energy Consumption
WiDom devices have the lowest power consumption among similar devices currently available in the market.
Simple installation - Electrical connection test
Before associating the device you can check if the electrical connections are correct, through (or using) the integrated button and the LED.
Control of local loading and associated devices independently with recognition of the click sequence. For example, you can control local loads with a single click and the associated devices with a double click.
Power supply: 230 VAC ± 10% 50/60 Hz
Maximum load: 250 watts
Temperature limitation: 105 ° C
Working temperature: -10 ° - 40 ° C
Radio frequency: Wave Z 868.4 MHz
Maximum distance: up to 100 m outside - up to 40 m inside
Dimensions: 37x37x17 mm
Consumption: <1 Watt
Actuator element: Double Power Mosfet
Compliance: CE, RoHs
Degree of electrical protection IP: IP20
Software update - You can independently update the firmware of the "Over the Air" device without having to remove the devices from their location.