The Fibaro FGD-212 dimmer micromodule with Z-Wave Plus technology will allow you to control a lamp or bulb while keeping the original switch already in place.
Micromodule 1 relay On / Off, Qubino Flush 1D is used to turn on / off, with Z-Wave Plus technology. The output contact is voltage free (D = Dry; dry contact), so we are talking about a dry contact relay
1 relay micromodule with Qubino Flush 1 Relay consumption control for on / off, with Z-Wave Plus technology. It is a relay used to turn on / off (On / Off - all / nothing) electrical devices such as lights, fans, ovens, washing machines, irons, power outlets, garage doors, electric radiators, water heaters, etc. ..
Qubino Flush Shutter DC Micromodule for controlling blinds, curtains, venetian blinds, awnings, garage doors, etc. with the ability to reverse the polarity to drive 12-24VDC (direct current) motors for this type of shutter home automation applications, its "shutter" or other door / window concealments based on inverted motors.
Qubino Flush Shutter Micromodule for home automation control of blinds, curtains, venetian blinds, awnings, etc. with the ability to reverse the polarity to handle 220v AC motors for this type of applications for opening and closing shutters and other "shutters" and solar protections for windows, facades and open spaces.
Regulator module or dimmer Z-Wave + QUBINO DIN Dimmer for mounting in electrical panel by DIN rail with consumption measurement.
Bypass or bridge for dimmers of the manufacturer Vision. Operates small loads on the 2-wire regulators controlled by Z-Wave.
It allows the control of motors of blinds and awnings locally and remotely through the standard Z-Wave. Reports the position of the engine in percentage.
Double relay micro-module 2x1.5Kw hidden or retractable Zipato, Z-Wave Plus technology with energy measurement, allows to control 2 loads of up to 1,500W each
Intelligent lighting (smarthome lighting) and LED regulation (dimmer). Universal regulation module (dimmer) with a standard 0-10V output and a multifunction input, which could be a pushbutton, switch, potentiometer or a 0 to 10 volt signal (0-10V)
The Fibaro FGS-223 "Double Switch 2" micro-module relay / switch will allow you to control two lights or two remote devices while maintaining the existing conventional switch.