Temperature sensor adaptable to the Universal Binary sensor, Dallas
Secure SES302 is the temperature sensor that allows measurements through auxiliary cables, NTC, sensors for tube and tank ...
Access Point Gigabit 900 + 300 Mbps. POE installation ceiling Up to 26 dBm (20 for EU). Meets 802.11 a / ac / b / g / n, double band 2.5 and 5 Ghz. 1 LAN port 10/100/1000 Mbps AUTO MDI / MDI-X, and POE 802.3af Control of bandwidth of connections, multiple SSID up to 32, limitation of clients and Radius Server
Room temperature sensor for the interior of Z-Wave technology. Optionally it can be used together with wired probes.
Probe for measuring the temperature of tanks, tanks or a floor heating system.
Cable temperature sensor to be connected to the dedicated port in a Qubino hidden or retractable modules that support it.
Z-Wave carbon monoxide sensor to eliminate the risk of poisoning by this harmful gas. Detect it through your home automation and trigger an alarm or warning, in addition to the device itself.
Secure SES 002 is a temperature probe to measure temperature in the external wall of a tube or a tank with hot liquid inside.
The Zipato carbon monoxide sensor is designed to give early warning if an abnormally high level of carbon monoxide is detected.
The temperature sensor with Dallas DS18B20 probe type cable consists of a temperature sensor, an analog-digital converter, an 8-byte memory and a 3-byte EEPROM
The Zipato Z-Wave Plus gas sensor is designed to avoid the risk of leakage of combustible gases (LPG) in homes.
The sensor offers 2 different functions: temperature sensor and humidity sensor