Controller of IP-COM access points for FAT access points. Easy to configure, manage and monitor up to 512 access points. Remote administration of AP and multi-branch AP. Captive Portal Server incorporated and personalized welcome page. Access the device type and the behavior statistics of the clients.
Switch 16 ports 10/100 Mbps. All POE (Full Power: 250 W) + 2 combo RJ45 / SFP ports manageable. Ideal for connecting and feeding IP cameras, IP phones and compatible POE Access Points using RJ45 cable. Management via Web and possibility of updating Firmware. Includes lugs for rack placement 19
Outdoor WiFi access point 802.11 b / g / n 150 Mbps. Built-in 12 dBi antenna, Maximum Power (Up to 30 dBm). 2 LAN ports 10/100 Mbps, 1 of them passive POE 12 V 1A with injector included
The IP-COM high density AP series are high performance Gigabit Wi-Fi access points, prepared for high density environments. Through 802.11ac Wi-Fi technology and improved transmission power and reception sensitivity, you can increase the range of Wi-Fi coverage, improve access density and stability of operation.
Switch 5 ports with fast ethernet with 5 ports 10/100 Mbps Half Power and 4 PoE ports up to 60W each in desktop format and metal housing.
Switch with 9 ports 10/100/1000 Mbps Full Power (8 POE 120W) desktop 9 RJ45 ports 10/100/1000 Mbps. (8 POE 802.3af / at up to 120W). Up to 150 Mts. away using RJ45 Cat. 5e Includes magnets for fastening to metal panels
10 Port Gigabit Ethernet Switch (8 RJ45 + 2 SFP) Full Power (8 POE 120W) Web Smart Rack Format 19 8 RJ45 ports 10/100/1000 Mbps compatible POE 802.3af / at 2 SFP slots for Gigabit ports Optical Fiber Smart Web Management complying with SNMP v2c. Meets 802.3af, 802.3x, 802.1q, 802.1p, 802.1x and ANSI / IEEE 802.3 Auto Negotiation
Switch 24 ports Gigabit all POE (Full Power: 370 W) + 4 ports SFP ports with Rack Management 19 Maximum consumption per port POE 30 W compatible 802.3 af / at and Maximum consumption with all active POE ports 370W Ideal for connecting and feeding IP cameras, IP phones and compatible POE access points using RJ45 cable Includes Web Management and...
Wireless access point 802.11 n / g / b for ceiling installation with PoE. It is a Wireless N 2T2R 300 Mbps FIT access point that works centrally through the IP-COM AC2000 and M50 controller
The ceiling and interior access point for high density environments IP-COM AP365 is a high performance Gigabit Wi-Fi access point, prepared for high density environments. Through 802.11ac Wi-Fi technology and enhanced transmission power and reception sensitivity, you can increase coverage range, improve access density and stability of operation
Switch 24 ports 10/100 Mbps. All PoE (Full Power: 250 W) + 2 combo ports RJ45 / SFP manageable