Always in touch: wired, Wi-Fi, LTE
Communication with the outside is essential for alarm control panels. Its reliability guarantees the delivery of alarm signals in a short time to the Alarm Receiving Centers and to the users of the system.
The Hub 2 Plus makes the stability of communication with the outside always possible. It has 4 communication channels and supports LTE. This configuration allows you to connect the device to two separate Internet providers via Ethernet and Wi-Fi while having two mobile services ready for backup. Channel change is done automatically in seconds.
Photo alarm verification in 9 seconds
Photo verification is the future of the security industry. This technology, an optimal solution for both commercial and residential premises, is accessible and designed to respect privacy. Animated photo series of MotionCam detectors allow users and operators of the CRA to assess the current situation. But cameras are activated only in response to alarms, never on request.
Hub 2 Plus can manage up to 200 MotionCam detectors and dispatch photographic acknowledgments of alarms to users and monitoring stations in just 9 seconds, even when using SIM cards for communication. Thanks to LTE support.
Guaranteed sending of alarms and photo confirmations
We have developed the Jeweler radio protocol to ensure continuous operation of all devices in the security system. Jeweler provides bi-directional communication between the hub and detectors at a distance of up to 2000 meters. However, it allows you to remotely control Ajax devices and transmit alarm signals in less than 0.15 seconds.
Jeweler uses time frames to synchronize communication with connected devices, authentication to eliminate counterfeiting, and encryption to protect against data leaks. In addition, it is an energy-efficient radio protocol that allows detectors to operate for years with pre-installed batteries.
Learn more about Jeweler technologies and features
Hub 2 Plus supports 64 scenarios that minimize human impact on the security of a location. You can automatically arm and disarm the entire security system or certain groups by programming. Plus, you can instantly activate a smoke safety machine in the event of an intrusion, cut off the power and turn on emergency lighting in the event of a fire, or shut off the water in the event of a leak. Using automation devices, Hub 2 Plus can control lights, electric locks and roller blinds. Scenarios can be triggered in response to changes in security mode, alarm triggers, or Button commands.
Protection of large facilities with a complex internal organization
Business centers, factories and multi-story villas with outbuildings - Hub 2 Plus is ready to secure even the most difficult properties. The new hub controls up to 200 devices. The range of its radio signal can reach up to 2000 meters, while the maximum coverage of the radio network can reach 35 km 2 . Hub 2 Plus can handle 25 security groups with a total of 200 users. This allows security personnel to divide large premises into zones and clearly organize personnel access.
Whatever happens to Hub 2 Plus, the central monitoring station and users will be notified about it. A tamper alarm is activated when intruders try to disassemble the device. If the Ajax Cloud server loses connection with a hub, the hub will send a notification in just 60 seconds thanks to short ping intervals. Even during a power failure, the Hub 2 Plus will continue to protect the premises for up to 15 hours powered by a built-in backup battery.
- Device polling period from
- Detection of loss of connection with a hub in
- Battery backup operation up to
Ready for the future
The Hub 2 Plus runs on OS Malevich, a real-time operating system developed by Ajax Systems. OS Malevich is extremely stable, immune to viruses and protected against cyberattacks.
The modular architecture makes it easy to constantly update the OS Malevich operating system. The system gains new features several times a year through automatic software updates. The process does not involve engineers or users and is implemented in minutes, only when the security system is disarmed.
Hub 2 Plus is the most efficient Ajax control panel. It has a processor that is 4.5 times faster than Hub 2 and has 8 times more flash memory. This hardware configuration allows the device to function for years and remains important.
Hub 2 Plus is ready to go right out of the box. It comes with pre-installed communicators, a power supply, and a backup battery. To start setting up the system, you will need to plug the device into a power outlet, connect it to the Internet, insert the SIM cards and scan the QR code with the app. Thanks to SmartBracket, you won't even have to disassemble the device to mount it.
All security system settings are always available in the app. Even when you are far from the hub, you can connect security devices or CCTV cameras, add users, test radio signal strength, create security groups and scenarios, or connect a hub to a central monitoring station.
Controlled with apps
We refuse to add buttons to our control panel and to use outdated interfaces. The apps are more comfortable and secure. They connect to a hub using a secure channel with Ajax Cloud, our server solution located in multiple AWS data centers. Apps allow users to control security, edit hub settings, configure connected devices, create scenarios, and monitor events. From a smartphone or PC. As long as you are on or off site.
Perfect security system upgrade
To simplify the upgrade process for installed hubs, we offer the possibility of automatic data transfer. The import function allows engineers to migrate configurations, connected devices, groups, scenarios and users from an old hub to Hub 2 Plus. In less than 15 minutes.