Small wireless detector that alerts...
Warning: Last items in stock!
It detects glass breakage using an electret microphone that records the sound of impact against glass and the sound of glass falling.
Dual glass break detection prevents false alarms caused by thunder, barking and the noise of passing trucks.
Installation and configuration
Ready to go straight out of the box - the battery is already installed so there is no need to disassemble the detector. With just one click, you can connect to the central unit (hub) in the application of your mobile device. It can be installed on the SmartBracket in a few minutes.
Classification: Security detector with radio channel and surface sound
Detector Type: Wireless
Installation method: Indoor
Compatibility: Works with Hub, Hub Plus, ReX, ocBridge Plus, uartBridge
Sensor: Electret Microphone
Break detection distance: Up to 9m
Alarm signal reception time: 0.15 s
Sensitivity: 3 levels adjustable
Detection angle: 180 °
Power supply: Battery: CR123A battery
Power supply voltage: 3V
Battery life: up to 7 years
Jeweler radio technology
Communication range with the central unit: up to 1200 m in open spaces
Two-way communication between devices
Operating Frequencies: 868.0-868.6 MHz
Self-adjusting radio frequency output power: up to 20mW
Block encryption based on AES algorithm
Detector scan period: 12,300s
Temperature sensor: Available
Operating temperature range: 5ºC to 40ºC
Allowable humidity: Up to 75%
Tamper: Tamper Protection
Inhibition detection: Tamper resistant
Remote setup and testing +
Dimensions: Diameter: 20mm
Certification: Grade 2, CE
Warranty: Repair and replacement up to 24 months after the date of purchase. Batteries are not covered by warranty.
GlassProtect glass break detector
SmartBracket fixing panel
CR123A battery (pre-installed)