Aeotec aërQ - Z-Wave + 700 temperature and humidity sensor

Precise air management

The Aeotec aërQ is a small sensor that monitors critical measurements of the indoor environment.

Temperature

Manage heating and cooling and maintain a perfectly tempered space; aërQ technology monitors and reports temperatures between -10 ° C and 65 ° C and with an accuracy of ± 1 ° C.

Humidity

Whether to manage air flow in living spaces or steam in showers, aërQ technology allows the relative humidity of a space to be measured between 0% and 80% and with an accuracy of ± 3%.

Dew

Comfort and dew point go hand in hand. Too low and the skin can become irritated. Too high and you won't cool off on a hot day. AërQ technology measures the dew point of a room in the same range as its relative humidity.

Mold

A compatible home automation controller can use aërQ technology to check for poor air quality and warn of the likelihood of mold spores.

Install it (almost) anywhere

Comprehension and intelligence, wherever you need it. The aërQ temperature and humidity sensor is small. Really small. At 35mm wide, it is barely wider than a button battery. It is designed this size to fit almost anywhere you need to measure temperature and humidity and analyze certain attributes of air health. Its precision and focus allow you to improve the measurements your automation systems receive from other sensors, while its size allows you to discreetly install multiple sensors in large rooms.

Measurement and understanding

Once paired with a compatible Z-Wave controller, you can monitor room temperature, humidity and health anytime, anywhere.

Measurement and automation

The aërQ temperature and humidity sensor is more than just information. Fully compatible Z-Wave controllers will allow you to exploit your measurements and analysis, using multiple data points and conclusions to enable powerful and intelligent automation.

Cool or heat a space to make it perfect. Automatically.

Set and automate your desired climate and turn on connected ventilation, air conditioning or heating when the temperature of a space is deemed less than perfect.

Moisten a space when the air is too dry. Automatically.

Saunas must look like saunas, deserts, deserts. Controls the relative humidity in a room and automatically turns on connected humidifiers, dehumidifiers or extractors.

Adjust the air flow when the air quality is poor. Yes, automatically.

Turn on the fans and open the windows automatically or reactively when the aërQ temperature and humidity sensor warns you of poor air quality and the risk of mold growth.

1 battery. Shelf life 2 years.

A single button cell keeps measuring for years. With precision.

Engineered in Germany around a unique and inexpensive CR2477 button cell, the aërQ temperature and humidity sensor uses Z-Wave's ultra-low-power Gen7 and S2 technologies, allowing it to work for up to 2 years before needing to be replaced. your stack. And changing the battery is child's play: you just have to separate the two parts, recycle the existing battery and insert a new one. The aërQ temperature and humidity sensor will be in place and will be measuring again in no time.

FUNCTIONS:

Measure temperature and humidity
Measure the dew point
Indicates risk of humidity
Supports 6 groups of associations
Up to 2 years of battery life
Z-Wave Smart Start and S2 Security
Wireless technology: Z-Wave Plus V2 (Z-Wave 700 / Gen7)

TECHNICAL DATA:

Power supply: CR2477 3V lithium battery (LiMnO2)
Battery life: with default settings, up to 2 years
Radio frequency: 868.42 MHz
Operating distance: up to 150 meters outdoors / more than 50 meters indoors
Humidity range: 0 to 80% RH + - 3%.
Temperature range: -10 to 65 ° C (+ - 1 ° C)
Dew point range: -10 to 65 ° C (+ - 1 ° C)
Operating humidity: 10 to 95%.
Operating temperature: 0 ° C to 45 ° C
Storage temperature: -30 ° C to 70 ° C
Dimensions: 35 x 35 x 18 mm
Weight: 21g