Viewed products





Confianza Online


Airlive ACTOP Access Point Ceiling 900 + 300 mbps

SES303

New

Access Point Gigabit 900 + 300 Mbps. POE installation ceiling Up to 26 dBm (20 for EU).
Meets 802.11 a / ac / b / g / n, double band 2.5 and 5 Ghz. 1 LAN port 10/100/1000 Mbps AUTO MDI / MDI-X, and POE 802.3af
Control of bandwidth of connections, multiple SSID up to 32, limitation of clients and Radius Server

More details

In Stock

89,00 €

Technical characteristics

Technology Z-Wave Plus

More info

Access point Gigabit 900 + 300 Mbps. Feeding via POE. Designed for ceiling installation. High range, up to 26 dBm (20 for EU). Meets 802.11 a / ac / b / g / n, double band 2.5 and 5 Ghz. It has 1 LAN port 10/100/1000 Mbps AUTO MDI / MDI-X, which is POE 802.3af (does not include injector). Control and configuration software AirLive Central Wireless free
Control of bandwidth of connections, multiple SSID up to 32, limitation of clients and Radius Server.

Airlive ACTOP point access roof

AP PoE Wireless for ceiling mounting

AirLive AC.TOP is an AP for ceiling mounting that minimizes its visibility in installations in public areas such as offices, malls, campuses, hotels, restaurants, clinics and hospitals. The built-in PoE Gigabit PoE port delivers electricity and data through an Ethernet cable that makes installation much easier.

Dual concurrent 802.11ac 1200Mbps band

AC.TOP includes next-generation WiFi technology that allows both 5Ghz and 2.4GHz wireless devices to be connected at a speed of 1200Mbps. It is also fully compatible with devices 11n, 11a, 11g and 11b.
Airlive ACTOP point access roof

100% higher coverage

With its high power radios and its 4 MIMO antennas, AC.TOP provides up to twice as much coverage compared to other access points.
Airlive ACTOP point access roof

Up to 100 wireless users

With its dual radio capability and powerful CPU, AC.TOP can support up to 100 WiFi users (50 per radio).
Airlive ACTOP point access roof

Free central administration software

Free AirLive Central software can detect your router automatically, allow you to change the settings and even update the firmware with a very easy-to-use interface. You can even form groups of configurations and update the firmware of several AirLive products such as AC-1200R, AC.TOP and N.TOP. Please see the following video for more details.

Built-in Radius server

Control WiFi access by username and password. Up to 256 accounts can be created. It is a cost-effective hotspot solution for wireless access control in hotels and companies.
Airlive ACTOP point access roof

Centralized account management

You can install several AC.TOP and assign a central Radius server. Therefore, all access accounts can be managed centrally.
Airlive ACTOP point access roof

Summary of features

    • Double Concurrent Band 1200Mbps

    • LAN Port Gigabit POE

    • 100 concurrent wireless users

    • Supports access control

    • Double distance of coverage

    • Built-in Radius server

    • Centralized Administration

    • Up to 32 SSID
Technical specifications
Model
AC.TOP
Chipset
MEDIATEK MT7620A (CPU) + QCA9882
16MB SPI Flash
64MB DDR2 RAM
LAN Port
10/100 / 1000M (Auto-MDI / MDI-X) UTP Port x 1
Antenna
2 X 2.4G 3dBi + 2 X 5G MIMO Internal Antenna
Frequency Range
2.4G
- 2.4000 ~ 2.4835GHz (Industrial Scientific Medical Band)
5G
- 5180 ~ 5240GHz ETSI.FCC
- 5745 ~ 5825GHz for FCC
Data Rate
11n (40MHz): MCS0-7, up to 300Mbps
11n (20MHz): MCS0-7, up to 144Mbps
11g: 6, 9, 12, 24, 36, 48, 54Mbps
11b: 1, 2, 5.5, 11Mbps
11ac (80Mhz): MSC0-9, up to 866Mbps
Wireless Security
WEP
WPA-PSK
WPA2-PSK
WPA-Radius
802.1x / EAP
software
Web Base Management
Setup Wizard
Wireless Mode: AP, WDS Repeater
Disable the SSID
Support Auto Channel
Channel Width Setting
Data Rate Selection
Tx Power Adjustment
Fragment Threshold
RTS Threshold
Beacon Interval
Preamble Type
CTS Protection
Short GI
DTIM Period
Wireless Access Control
Wireless Site survey
WPS
Wireless Scheduling
Build in Radius Server and Account
Support Dynamic / Static IP address Assignment
Device Name Setting
Support NTP and Daylight Saving
Password Changeable
Support HTTPS
SNMP v1 / 2c Get / Set Community
SNMP Trap with Private MIB
Firmware Upgrade
Configuration Backup and Restore
Device Statistics
System Log in the Device and Remote Log Server
Schedule Reboot
Management Feature
IP Wizard
AirLIve Central Wireless
SNMP v1 / v2c
Web Management
Maximum Output Power (EIRP)
ETSI
- 2.4GHz: 19 ± 1dBm
- 5GHz: 22 ± 1dBm
FCC
- 2.4GHz: 26 ± 1dBm
- 5GHz: 22 ± 1dBm
Receive Sensitivity
2.4GHz
- 11b (11M): -90 ± 2dBm
- 11g (54M): -75 ± 2dBm
- 11n (20MHz, MCS7): - 70 ± 2dBm
- 11n (40MHz, MCS7): - 70 ± 2dBm
5GHz
- 11a (54M): -72 ± 2dBm
- 11n (20MHz, MCS7): -68 ± 2dBm
- 11n (40MHz, MCS7): -68 ± 2dBm
- 11ac (80MHz, VHTMCS9): -58 ± 2dBm
Power
12V / 1A Switch Power Adapter
802.3af PoE Input
Temperature
Operating
- 0 ~ 50
Storage
- -20 ~ 60
Humidity
Operating
- 10 ~ 90% (Non-Condensing)
Storage
- Max. 95% (Non-Condensing)
Certification
EC
FCC
Dimension
176 (D) x 30 (H) mm

Extended Z-Wave info

Name: Environmental Sensor
Manufacturer:Secure Controls (UK)
Identifier:SES 303
Z-Wave Certification Number:ZC10-15010003
Hardware Plattform:ZM5202
FLiRS:NO
Role Type:Reporting Sleeping Slave
Short Description:The Environmental Sensor (SES 303) is a temperature and humidity sensor, which also supports four external digital temperature sensors or one external analog temperature sensor.
Description:The Environmental Sensor (SES 303) measures temperature and humidity. The sensors are battery-operated devices which transmit information to an associated device in a network. It can support either 1 thermistor (SES 001) or up to 4 external digital temperature sensors (SES 002/003). SES 303 operates on 2x AA batteries, providing a nominal life of 2 years (with on-board sensors operating with the default configuration).

Manual download HERE.

Group
Max Nodes
Description
1
2
Z-Wave Plus Lifeline, in which multilevel sensor report, Battery low alarm are reported. Each endpoint supports 1 association group.
Number
Size (Bytes)
Default Value
Name
Description
1
1
0
Delta Temperature
This Parameter is used to configure the delta based temperature report. To configure Delta temperature reporting to 2 °C. The value need to configured in device is 2/0.1 = 20. Controllers may only allow configuring signed values. In order to set values in the range 128…255, the value sent in the application shall be equal to desired value minus 256. For example, to set Delta Temperature to 130, it may be needed to set a value 130−256=−126.
2
1
5
Temp Reporting Intervals
This Parameter is used to configure the time interval based temperature report. Controllers may only allow configuring signed values. In order to set values in the range 128…255, the value sent in the application shall be equal to desired value minus 256. For example, to set Delta Temperature to 130, it may be needed to set a value 130−256=−126.
3
1
5
Delta Humidity
This Parameter is used to configure the delta based humidity report. To configure Delta humidity reporting to 2 %Rh. The value need to configured in device is 2/0.1 = 20. Controllers may only allow configuring signed values. In order to set values in the range 128…255, the value sent in the application shall be equal to desired value minus 256. For example, to set Delta Temperature to 130, it may be needed to set a value 130−256=−126.
4
1
5
Humidity Reporting Interval
This Parameter is used to configure the time interval based humidity report. Controllers may only allow configuring signed values. In order to set values in the range 128…255, the value sent in the application shall be equal to desired value minus 256. For example, to set Delta Temperature to 130, it may be needed to set a value 130−256=−126.
Exclusion
Step 1.On the Z-Wave controller, select exclusion for removing a device from the network.
Step 2: On the SES 303, press the button, hold and release after 1 second to send a request (Network Information Frame) to remove from the network. On successful exclusion the LED will flash 2 times. The total process can take up to 2 seconds. If the LED flashes 4-times this means that the exclusion process has failed, so try moving the SES 303 to another position and repeat the exclusion steps. The controller will show when the exclusion operation is successful.
Factory Reset
Please use this procedure only when the primary controller is missing or otherwise inoperable.
To reset the device to factory resst, press the button 3 times within 3 seconds it will put the device in factory default, that include setting all the configuration, Association to factory default and removing the device from Z-Wave network.
Learn Mode (adding another controller)
Not applicable
Device Wake-Up
Device can be wakeup by button press of more then one second, devcie will stay in wakeup state for about 10 seconds.
device will also wakeup on the every wakeup interval configured by controller. The minimum wakeup interval can be configured is 2 minutes and maximum wakeup interval can be configured is 24 hours in setps of one minte.
Default wakeup interval is 24 hours.
Additional Special Features
None
Inclusion
Step 1.On the Z-Wave controller, select Include for adding a device to the network.
Step 2: On the SES 303, press the button, hold and release after 1 second to send a request (Network Information Frame) to join the network. On successful inclusion the LED will flash 2 times. The total process can take up to 20 seconds. If the LED flashes 4-times this means that the inclusion process has failed, so try moving the SES 303 to another position and repeat the Inclusion steps. If the inclusion process fails again, the device may be already included in another network. So first exclude and then include the device. The controller will show when the inclusion operation is successful.

 

Reviews

Write a review

Airlive ACTOP Access Point Ceiling 900 + 300 mbps

Airlive ACTOP Access Point Ceiling 900 + 300 mbps

Access Point Gigabit 900 + 300 Mbps. POE installation ceiling Up to 26 dBm (20 for EU).
Meets 802.11 a / ac / b / g / n, double band 2.5 and 5 Ghz. 1 LAN port 10/100/1000 Mbps AUTO MDI / MDI-X, and POE 802.3af
Control of bandwidth of connections, multiple SSID up to 32, limitation of clients and Radius Server

23 other products in the same category:

Customers who bought this product also bought: