Viewed products





Confianza Online


Popp CO Detector

POPE004407

New

Z-Wave carbon monoxide sensor to eliminate the risk of poisoning by this harmful gas. Detect it through your home automation and trigger an alarm or warning, in addition to the device itself.

More details

In Stock

90,00 €

Technical characteristics

Technology Z-Wave Plus

More info

CARBON MONOXIDE is an invisible and deadly danger in the home!
CARBON MONOXIDE is poisonous and can be very harmful. You can not see it, you can not taste it and you can not smell it.
The POPP CO detector with integrated Z-Wave plus technology helps make your smart home even safer.

The electro-chemical CO sensor controls the quality of the air and warns reliably when the CO exceeds a defined limit. In case of alarm, the device causes a loud sound (85 dB / 3m) and informs the home automation controller and its alarm panel of an abnormal situation. It also offers the current measurement value to the Z-Wave control center. In addition, the device has its own protection against manipulation.

Characteristics:

10-year integrated lithium battery
Alarm sound with 85 dB / 3m
Easy-Press-button for easy testing and muting
Memory function informs about previous CO detection
Independent LED signaling lights for power supply, alarm mode and error reporting
BS EN 50270: 1999, BS EN 60335-1: 1994, BS EN 50291: 2010
Firmware update during use in the field

Extended Z-Wave info

Name: Z-Wave CO Detector
Manufacturer:Popp
Identifier:POPE004407
Z-Wave Certification Number:ZC10-16125332
Hardware Plattform:ZM5202
FLiRS:NO
Role Type:Reporting Sleeping Slave
Short Description:This product combines a certified stand-alone Carbon Monoxide alarm with a plug-in Z-Wave module to form a wirelessly reporting Carbon Monoxide alarm. The Carbon Monoxide alarm is tested and certified by BSI to EN5029:2010.
Description:The High-End Electro-Chemical Carbon Monoxide alarm head offers a 10 year sensor life and is powered via a 3V lithium battery that powers the Alarm head for the life of the alarm. The CO Sensor is monitored electronically and will report the following: 1. Alarm on Sensing Carbon Monoxide 2. Battery status reporting 3. Sensor Fault 4. Alarm removal from mounting plate 5. End of life to make sure it is replaced on time. The device is a secure Z-Wave Plus device and can be used in one wireless Z-Wave network with other certified devices regardless of origin and brand.

Manual download HERE.

Group
Max Nodes
Description
1
10
Z-Wave Plus Lifeline
2
10
Switching Command when Alarm
Number
Size (Bytes)
Default Value
Name
Description
1
1
99
Value of On-Command
2
1
0
Value of Off-Command
Basic
COMMAND_CLASS_BASIC
Security S0
COMMAND_CLASS_SECURITY
Association Group Info
COMMAND_CLASS_ASSOCIATION_GRP_INFO
Association V2
COMMAND_CLASS_ASSOCIATION_V2
Basic
COMMAND_CLASS_BASIC
Battery
COMMAND_CLASS_BATTERY
Configuration
COMMAND_CLASS_CONFIGURATION
Device Reset Locally
COMMAND_CLASS_DEVICE_RESET_LOCALLY
Firmware Update Meta-Data V3
COMMAND_CLASS_FIRMWARE_UPDATE_MD_V3
Manufacturer Specific V2
COMMAND_CLASS_MANUFACTURER_SPECIFIC_V2
Notification V5
COMMAND_CLASS_NOTIFICATION_V5
Powerlevel
COMMAND_CLASS_POWERLEVEL
Security S0
COMMAND_CLASS_SECURITY
Sensor Binary V2
COMMAND_CLASS_SENSOR_BINARY_V2
Sensor Multilevel V5
COMMAND_CLASS_SENSOR_MULTILEVEL_V5
Version V2
COMMAND_CLASS_VERSION_V2
Wake Up V2
COMMAND_CLASS_WAKE_UP_V2
Z-Wave Plus Info V2
COMMAND_CLASS_ZWAVEPLUS_INFO_V2
Inclusion
Pressing the button 'Inclusion Button' for one second will include the device. If the button is pressed for at least 2 seconds the inclusion will be done without the Security Command Class.
Exclusion
A single click on the button will exclude the device.
Factory Reset
To do a factory reset press the button on the bottom of the device for at least 10 seconds. This procedure should only be used when the primary controller is inoperable.
Device Wake-Up
A single click on the button will wakeup the device.
Battery Quantity
Enter the number of batteries of the designated type that the product uses.
Color
If the product is only available in one color, pick the color from the list.
Battery Type
Enter the type (e.g. AA, CR2032, AAA) of the battery/batteries that the product uses.

 

Reviews

Write a review

Popp CO Detector

Popp CO Detector

Z-Wave carbon monoxide sensor to eliminate the risk of poisoning by this harmful gas. Detect it through your home automation and trigger an alarm or warning, in addition to the device itself.

15 other products in the same category:

Customers who bought this product also bought: