Protect your devices from possible...
Protect your devices from possible overload using the WiDom Smart Plug and control your electrical devices remotely. Additionally, you can use precise power consumption monitoring to identify nuisance power consumers.
Warning: Last items in stock!
Due to its sleek design and small size, the WiDom Smart Plug fits into any commercial outlet and does not obstruct adjacent sockets. The WiDom Smart Plug can be easily integrated into your Z-Wave network and is compatible with other Z-Wave devices from different manufacturers. You control the connected device with the push button on the device or via a Smartphone or Tablet through a Z-Wave gateway.
With its repeater function, the WiDom Smart Plug increases the reliability of your Z-Wave network. The device's LED provides visual feedback in the event of overvoltage and / or overcurrent, as well as in the event of a power outage.
The WiDom Smart Plug is a smart plug that monitors all types of connected equipment and detects overvoltages and / or overcurrents, protecting appliances and equipment from damage caused by excess electrical voltage. At the same time, it controls energy consumption, a dual function that is extremely useful not only for those who want to save money, but also for those who are concerned about the environment.
Control of energy consumption
Power and voltage meter
Are you using your hair dryer and want to know how much you are consuming? No problem, the smart plug does it for you. If you're in a rush to get out and aren't sure whether you've turned off the iron or a small heater, our plug can also be remotely controlled, for your maximum safety.
EVERYTHING UNDER CONTROL
The Smart Plug integrates an extremely accurate energy consumption meter, so you can easily monitor the consumption of connected equipment. It is ready to install but is customizable.
You can control the smart socket from the built-in button or from your computer, tablet or smartphone, depending on your current needs.
An RGB LED on the device indicates overvoltage and overvoltage. Cases of overvoltage or overcurrent can also be identified by a built-in timer.
In case of overcurrent, overvoltage or when the integrated key is pressed, the Smart Plug can control other devices included in the Z-Wave network.
It can also act as a signal repeater to increase network reliability.
Easy Installation - Simplified Inclusion and Exclusion
The inclusion / exclusion in the Z-Wave network can be initiated not only by the controller, but also by the device with any sequence of clicks on the integrated button.
The zero crossing reduces the electrical voltage of the relay contacts and guarantees a longer service life of the devices.
Protection and security
WiDom devices use an S2 security system, with advanced encryption, which provides advanced security features and eliminates the risk of hacking.
Savings - Low energy consumption
WiDom devices have the lowest power consumption among similar devices on the market.
Control of local load and associated devices independently of the recognition of the click sequence. For example, you can control local loads with a single click and associated devices with a double click.
Power supply: 230 VAC ± 10% 50/60 Hz
Maximum load: 2800 VA - 230VAC - 12A
Temperature limit: 105 ° C
Working temperature: -10 ° - 40 ° C
Radio protocol: Wave Z 868.4 MHz
Maximum distance: up to 100m outdoors - up to 40m indoors
Dimensions: 69x44x44x44 mm
Power consumption: <0.4 watts
Actuating element: Relay
Compliance: CE, RoHs
Degree of protection: IP20