Viewed products





Confianza Online


Aeotec WallMote Quad - Remote control with 4 buttons

AEOEZW130

New

Lighting control. Control of devices. Control of scenes. Z-Wave control. There are thousands of Z-Wave devices that you can have in your home or office, but controlling them sometimes is not natural. Typically, you have to take out your mobile using a tablet or a computer. WallMote brings natural and intrinsic control by improving the connected house.

More details

In Stock

89,90 €

Technical characteristics

Technology Z-Wave Plus

More info

The Aeotec WallMote is a remote control or remote control, wall switch and Z-Wave all-in-one controller. This device can manage its own Z-Wave network (if it is included as primary controller) and can control other devices such as wall sockets, blinds, dimmers, lights, electronic door locks and many more. Obviously, it can also be integrated into a Z-Wave network as a secondary controller, where there is already a home automation controller. Each mode will be activated at the factory default after the first action. As a secondary controller, it sends commands to the Z-Wave controller and also controls the defined devices and scenes.

WallMote can activate the corresponding functions with a single click. In addition, it dominates the so-called "sliding". This touch control system allows you to slide with just one finger through the relevant area on the WallMote to dim the lights by intuition, for example.

The battery powered touch switch comes with a magnet that allows you to keep the device in the respective wall bracket. In this way WallMote becomes a wall switch. You can also take the device away and use it as a portable remote control.

If you want to know more, you can check the analysis we have done in our Aeotec Wallmote Quad test here

Aeotec Wallmote Spain

"Remote switch with a 4-button touch surface
"Z-Wave Plus
"Frequency UE: 868.42 MHz
"Feedback of vibration during operation
"Sliding function
"The integrated color LED indicates the status
"Package content: remote touch switch, wall bracket, mounting materials

Extended Z-Wave info

Name: WallMote Quad
Manufacturer:Aeotec
Identifier:ZW130-C
Z-Wave Certification Number:ZC10-17035521
Hardware Plattform:ZM5101
FLiRS:NO
Role Type:Portable Slave
Short Description:Aeotec WallMote Quad is an intelligent Z-Wave remote controller that is mounted on a wall
Description:Aeotec WallMote Quad is an intelligent Z-Wave remote controller that mounted on a wall. It has 4 touch buttons that you can easily control the Z-Wave devices in your home network via touching, long pressing or sliding the button areas. Its surface has a RGB LED to indicate the button actions also accompanied by touch beep and vibration. The WallMote Quad is also a security Z-Wave device and supports Over The Air (OTA) feature for the products firmware upgrade.

Manual download HERE.

Group
Max Nodes
Description
1
1
Z-Wave Plus Lifeline. When touching the Button 1 to 4, the Central Scene Notificcation command will be sent to the associated node (1) in Association group 1.
2
5
When touching the Button 1, the Basic Set command will be sent to the associated nodes in Association group 2.
3
5
When touching the Button 1, the Multilevel Switch Set command will be sent to the associated nodes in Association group 3.
4
5
When touching the Button 2, the Basic Set command will be sent to the associated nodes in Association group 4.
5
5
When touching the Button 2, the Multilevel Switch Set command will be sent to the associated nodes in Association group 5.
6
5
When touching the Button 3, the Basic Set command will be sent to the associated nodes in Association group 6.
7
5
When touching the Button 3, the Multilevel Switch Set command will be sent to the associated nodes in Association group 7.
8
5
When touching the Button 4, the Basic Set command will be sent to the associated nodes in Association group 8.
9
5
When touching the Button 4, the Multilevel Switch Set command will be sent to the associated nodes in Association group 9.
Number
Size (Bytes)
Default Value
Name
Description
1
1
1
Enable/disable the touch sound.
Enable/disable the touch sound.
2
1
0
Enable/disable the touch vibration.
Enable/disable the touch vibration.
255
4
0
Reset the WallMote Quad
Reset the WallMote Quad to factory default.
3
1
1
Enable/disable the function of button slide.
Enable/disable the function of button slide.
39
1
5
Set the low battery value.
Set the low battery value..
4
1
1
To configure which report will be sent when pressing the buttons.
To set which notification would be sent to the associated devices (Group 1) when pressing the buttons.
Basic
COMMAND_CLASS_BASIC
Switch Binary V2
COMMAND_CLASS_SWITCH_BINARY_V2
Switch Multilevel V4
COMMAND_CLASS_SWITCH_MULTILEVEL_V4
Association Group Info
COMMAND_CLASS_ASSOCIATION_GRP_INFO
Association V2
COMMAND_CLASS_ASSOCIATION_V2
Battery
COMMAND_CLASS_BATTERY
Central Scene V2
COMMAND_CLASS_CENTRAL_SCENE_V2
Configuration
COMMAND_CLASS_CONFIGURATION
Device Reset Locally
COMMAND_CLASS_DEVICE_RESET_LOCALLY
Firmware Update Meta-Data V2
COMMAND_CLASS_FIRMWARE_UPDATE_MD_V2
Manufacturer Specific V2
COMMAND_CLASS_MANUFACTURER_SPECIFIC_V2
Multi-Channel Association V3
COMMAND_CLASS_MULTI_CHANNEL_ASSOCIATION_V3
Multi-Channel V4
COMMAND_CLASS_MULTI_CHANNEL_V4
Notification V4
COMMAND_CLASS_NOTIFICATION_V4
Powerlevel
COMMAND_CLASS_POWERLEVEL
Security S0
COMMAND_CLASS_SECURITY
Version V2
COMMAND_CLASS_VERSION_V2
Wake Up V2
COMMAND_CLASS_WAKE_UP_V2
Z-Wave Plus Info V2
COMMAND_CLASS_ZWAVEPLUS_INFO_V2
Additional Special Features
Support ""Over the Air Firmware Updating"" and “Z-Wave Security”.

Factory Reset
Press and hold the Action button that you can find on the product's housing for 20 seconds and then release. This procedure should only be used when the primary controller is missing or inoperable.
Controller Inclusion
Turn the primary controller of Z-Wave network into inclusion mode, short press the product’s Action button that you can find on the product's housing.
Controller Exclusion
Turn the primary controller of Z-Wave network into exclusion mode, short press the product’s Action button that you can find on the product's housing.
Firmware Updatable
Indicates whether the firmware can be updated and whether it is done by the consumer or a technician.
Z-Wave Scene Type
Indicates which of the two types of Z-Wave scene command classes are supported. Scenes or Central Scene

 

Reviews

Write a review

Aeotec WallMote Quad - Remote control with 4 buttons

Aeotec WallMote Quad - Remote control with 4 buttons

Lighting control. Control of devices. Control of scenes. Z-Wave control. There are thousands of Z-Wave devices that you can have in your home or office, but controlling them sometimes is not natural. Typically, you have to take out your mobile using a tablet or a computer. WallMote brings natural and intrinsic control by improving the connected house.

20 other products in the same category:

Customers who bought this product also bought: