Viewed products





Confianza Online


HANK Controlador de ewscans Z-Wave+ de 4 botones View larger

HANK 4-Button Z-Wave + Scene Controller

HKZW-SCN04

New

The Hank scene controller in a 4-button version of Z-Wave + technology is a wireless, portable and rechargeable device.

More details

In Stock

34,95 €

Technical characteristics

Technology Z-Wave Plus

More info

4-button Z-Wave + scene controller


The Hank Z-Wave + scene controller is a wireless, portable and rechargeable device. You can control Z-Wave devices, such as a smart plug or smart dimmer after being included in a Z-Wave controller. You can also use it to activate scenes.

This scene controller can perform 3 different actions per button, depending on the type of support: short press, sustained support, released support.

When operating with a rechargeable battery with a range of 3 to 6 months, it will be very easy to recharge it by connecting a USB cable to its micro-USB port. It is not necessary to change the batteries! In addition, this scene controller is equipped with a buzzer that will alert when the battery is low (less than 20%) or when communication has failed.

An RGB LED is present to provide visual information. This scene controller is also equipped with the Z-Wave range test function.

You need a Z-Wave controller (remote control, dongle ...) to integrate this module into your network if you already have an existing network.

FUNCTIONS:

Z-Wave + scene controller
Control up to 3 devices / scenes per button
Z-Wave range test function
Rechargeable battery
Low battery warning and communication error (through the buzzer)
Security of radio communication through AES-128 encryption
Integrates the chip of the Z-Wave 500 series
Firmware updates by air (OTA)
Ease of use and installation

TECHNICAL CHARACTERISTICS :

Module type: Transmitter of the Z-Wave + 500 series
Power supply: rechargeable battery 3.6V LIR2450
Standby power consumption: 3uA
Operating power consumption: 36mA
Frequency: 868.42 Mhz
Transmission distance: 100 m in free field, 30 m in indoor
Dimensions: 50 x 50 x16 mm
Operating temperature: 0 ° C to 40 ° C
Certifications: FCC, CE, Z-Wave
Z-Wave certification number: ZC10-16095219

Extended Z-Wave info

Name: Scene Controller
Manufacturer:Hank
Identifier:HKZW-SCN04
Z-Wave Certification Number:ZC10-16095219
Hardware Plattform:ZM5101
FLiRS:NO
Role Type:Portable Slave
Short Description:The Scene Controller is a wireless, portable and rechargeable scene switch. It can control a Z-Wave device, such as smart plug, smart dimmer with a Z-Wave gateway.
Description:The Scene Controller is a wireless, portable and rechargeable scene switch. It can control a Z-Wave device, such as smart plug, smart dimmer with a Z-Wave gateway. You can also activate a scene like sleep scene, movie scene and entertainment scene with it.

Manual download HERE.

Group
Max Nodes
Description
1
5
Scene Controller will send the central scene notification command and battery report command to the associated nodes if any button is triggered.
2
5
Scene Controller will send Basic Set command to the associated nodes if button 1 is pressed.
3
5
Scene Controller will send switch multilevel set, the multilevel start level change and multilevel stop level change command to the associated nodes if button 1 is pressed, hold and released, respectively.
4
5
Scene Controller will send Basic Set command to the associated nodes if button 2 is pressed.
5
5
Scene Controller will send switch multilevel set, the multilevel start level change and multilevel stop level change command to the associated nodes if button 2 is pressed, hold and released, respectively.
6
5
Scene Controller will send Basic Set command to the associated nodes if button 3 is pressed.
7
5
Scene Controller will send switch multilevel set, the multilevel start level change and multilevel stop level change command to the associated nodes if button 3 is pressed, hold and released, respectively.
8
5
Scene Controller will send Basic Set command to the associated nodes if button 4 is pressed.
9
5
Scene Controller will send switch multilevel set, the multilevel start level change and multilevel stop level change command to the associated nodes if button 4 is pressed, hold and released, respectively.
Number
Size (Bytes)
Default Value
Name
Description
254
1
0
Enable/disable the configuration command
Lock/unlock all configuration parameters.
255
4
0
Reset Scene Controller
Reset Scene Controller and remove from the Z-Wave network
Basic
COMMAND_CLASS_BASIC
Battery
COMMAND_CLASS_BATTERY
Central Scene V2
COMMAND_CLASS_CENTRAL_SCENE_V2
Switch Multilevel V2
COMMAND_CLASS_SWITCH_MULTILEVEL_V2
Association Group Info
COMMAND_CLASS_ASSOCIATION_GRP_INFO
Association V2
COMMAND_CLASS_ASSOCIATION_V2
Battery
COMMAND_CLASS_BATTERY
Central Scene V2
COMMAND_CLASS_CENTRAL_SCENE_V2
Configuration
COMMAND_CLASS_CONFIGURATION
Device Reset Locally
COMMAND_CLASS_DEVICE_RESET_LOCALLY
Firmware Update Meta-Data V2
COMMAND_CLASS_FIRMWARE_UPDATE_MD_V2
Manufacturer Specific V2
COMMAND_CLASS_MANUFACTURER_SPECIFIC_V2
Powerlevel
COMMAND_CLASS_POWERLEVEL
Security S0
COMMAND_CLASS_SECURITY
Version V2
COMMAND_CLASS_VERSION_V2
Wake Up V2
COMMAND_CLASS_WAKE_UP_V2
Z-Wave Plus Info V2
COMMAND_CLASS_ZWAVEPLUS_INFO_V2
Controller Exclusion
To remove the Scene Controller from the Z-Wave network:

(1) Insert the LIR2450 battery.

(2) Set the Z-Wave network main controller into remove mode

(see Z-Wave controller operating manual).

(3) Triple click the a button, if the exclusion is successful, LED

will blink in orange for less than 5 seconds and then keep on

for 3 seconds.





Controller Inclusion
Included as non-secure device:

1. Insert the LIR2450 battery.

2. Set the Z-Wave network main controller into learning mode( see Z-Waave network controller operating manul).

3. Triple click a button.

4. If the inclusion is successful, the LED will blink in blue less than for 5 seconds and then keep on for 15 seconds.



Included as a secure device:

1. Insert the LIR2450 battery.

2. Set the Z-Wave network main controller into learning mode( see Z-Wave network controller operating manual).

3. Pressing and holding a button for 3 seconds.

4. If the inclusion is successful, the LED will blink in green less than for 5 seconds and then keep on for 15 seconds.



Factory Reset
Pressing and holding a button for 20 seconds. Release the button after 20 seconds, LED will keep in yellow for 3 seconds. Scene Controller will be reset to factory defaults if you short press the button within this 3 seconds.

Using this procedure only in the event that the network primary controller is missing or otherwise inoperable.
Device Wake-Up
Pressing and holding a button for 3 seconds. Led will turn to green,

which means Scene Controller has been woken up.
Battery Quantity
Enter the number of batteries of the designated type that the product uses.
Z-Wave Scene Type
Indicates which of the two types of Z-Wave scene command classes are supported. Scenes or Central Scene
Battery Type
Enter the type (e.g. AA, CR2032, AAA) of the battery/batteries that the product uses.

 

Reviews

Write a review

HANK 4-Button Z-Wave + Scene Controller

HANK 4-Button Z-Wave + Scene Controller

The Hank scene controller in a 4-button version of Z-Wave + technology is a wireless, portable and rechargeable device.

20 other products in the same category:

Customers who bought this product also bought: