Name: Smart Siren
Z-Wave Certification Number:ZC10-18066158
Role Type:Always On Slave
Short Description:The Smart Siren is designed to issue alarms to scare off intruder.
Description:The Smart Siren is designed to issue alarms to scare off intruder. This Smart Siren adopts z-wave technology, if a z-wave network is built in the user' home,office, warehouse or other places, when an alarm in the z-wave network is triggered, this Smart Siren will issue high decibel sound and light alarms, and alarm information will also be sent to the user's phone App.
Association group 1: Lifeline association group
Include command classes: Switch Binary report ,Battery and Device Reset Locally notification.
Association Group Info
Device Reset Locally
Firmware Update Meta-Data V4
Manufacturer Specific V2
Multi-Channel Association V3
Transport Service V2
Z-Wave Plus Info V2
-Long press Net_Button at least 10 seconds in the product.
Click [Add] icon in Z-Wave Controller.
- Press the Net_Button 3 times within 1.5s, Green LED is Blinking 3 times within 1 .5second.
- If add Process is successful, Green LED will turn off.
- Click [Remove] icon in Z-Wave Controller.
- Press the Net_Button 3 times within 1.5second.
- If remove Process is successful, Green LED is Blinking 6 times, then turn off.
Switch Load Capacity Watts
The amount of switch load energy the product is rated for in Watts
Switch Load Capacity Current
The amount of switch load energy the product is rated for in Amps
Indicates whether the firmware can be updated and whether it is done by the consumer or a technician.
Switch Load Capacity Volt-Ampere
The amount of switch load energy the product is rated for in VA (Volt-Amperes)
Enter the type (e.g. AA, CR2032, AAA) of the battery/batteries that the product uses.
If the product is only available in one color, pick the color from the list.
Enter the number of batteries of the designated type that the product uses.