For AJAX alarms. Wireless fire...
Warning: Last items in stock!
The device detects smoke using a camera with a photoelectric sensor. If there are no smoke emissions, the additional detector registers increases in room temperature.
It can work independently of the central unit (hub) emitting a fire alarm thanks to its integrated siren. Several detectors give the alarm simultaneously.
Installation and configuration
Ready to go straight out of the box - the battery is already installed so there is no need to disassemble the detector. With just one click, you can connect to the central unit (hub) in the application of your mobile device. It can be installed on the SmartBracket in a few minutes.
Classification: Smoke detector with radio channel, temperature sensor and integrated siren
Detector Type: Wireless
Installation method: Indoor
Compatibility: Device works independently or with Hub, Hub Plus, ReX, ocBridge Plus, uartBridge
Sensor: Photoelectric and temperature sensors
Activation threshold: from 54ºC to 65ºC
Notification type: Acoustic / luminous
Integrated siren volume: 85 dB
Alarm signal reception time: 0.15 s
False alarm filter +
Alarm interconnection +
Power supply: Two CR2 batteries
Power supply voltage: 3V
Battery life: up to 4 years
Backup battery: CR2032
Additional temperature sensor: Available
Allowable humidity: Up to 80%
Tamper: Tamper Protection / Inhibition Detection / Tamper Resistant /
Remote setup and testing +
Dimensions: 132E132 × 31 mm
Certification: CE 1922
Warranty: Repair and replacement up to 24 months after the date of purchase. Batteries are not covered by warranty.
SmartBracket fixing panel
2 CR2 batteries (pre-installed)
1 CR2032 backup battery (pre-installed)