AEOTEC 6 Multi-Color LED Bulb (E27)

Technical characteristics

Technology	Z-Wave Plus

More info

The smart AEOTEC LED Bulb 6 Multi-Color turns your home light into smart lights. The LED bulb fits all E27 socket and can be connected to the Smart Home front door via Z-Wave wireless technology right after being powered with 230V. The required Z-Wave chip is already integrated into the bulb housing. You can vary the brightness and color of the light easily via remote control, smartphone or tablet. Daylight, candlelight or party mood: from now on you can define a light mood according to your wishes. You can also use scenes (for example, in the case of an alarm) to activate an appropriate light color such as red.

The multi-color edition of the LED 6 bulb offers 16 million dimmable colors. Depending on your mood, you can use the full range of rainbow colors and many more.

Due to the LED technology, the energy consumption is very low compared to conventional bulbs. The Aeotec light bulb is as bright as a conventional 60 watt light bulb, but only needs 9.5 watts. You can save money and protect the environment because the LED bulb has a lifespan of up to 25,000 hours.

features:

Dimmable RGBW LED bulb offers 16 million colors
Light aspect: 2700K to 6500K
Brightness: 806 lumens
CRI: 80
Input: 220-240V, 50Hz
Lamp for E27 socket
Power consumption: max. 9.5 W
Beam angle: 240 °
Wireless technology: Z-Wave Plus

Extended Z-Wave info

Name: LED Bulb 6:Multi-Colour

Manufacturer:Aeotec

Identifier:ZWA002-C

Z-Wave Certification Number:ZC10-18046097

Hardware Plattform:ZM5101

FLiRS:NO

Role Type:Always On Slave

Short Description:RGBW: dimmable from 5% to 100%, tunable from 1800K to 6500K, and 16 million colors

Description:✓ Standard form factor and appearance of the light bulb with 800 lm output ✓ RGBW: dimmable from 5% to 100%, tunable from 1800K to 6500K, and 16 million colors ✓ Possible to be included in groups, scenes, or schedules ✓ Suitable for indoor lighting: Corridors, Bedroom, Living Room, etc.

Manual download HERE.

Group

Max Nodes

Description

1

Set Configuration parameter 0x50 0: nothing. 1: Send the Basic Report. 2. Send Device Reset Locally CC

Number

Size (Bytes)

Default Value

Name

Description

1

0

User custom mode for LED animations.

User custom mode for LED animations. 0 = Disable custom mode. 1= Blink Colors in order mode. 2=Randomized blink color mode

16

1

20

Ramp rate when dimming using Multilevel Switch V1 CC in 100ms

Ramp rate when dimming using Multilevel Switch V1 CC in 100ms Value range = 0x00 -0x64

2

1

0

Enable/Disable Strobe over Custom Color.

Enable/Disable Strobe over Custom Color. 0 = Disable. 1 = Enable. Others = Ignore.

3

1

50

Set the rate of change to next color in Custom Mode.

Set the rate of change to next color in Custom Mode. Value1 ~ Value4: Value Range = 5 - 8640000 (50 - 86400000ms)

4

1

Set color that LED Bulb blinks in (Blink Mode)

Set color that LED Bulb blinks in (Blink Mode) -128 to 127 corresponds with the unsigned values 0 to 255 or hex values 0x00 to 0xFF

80

1

Enable to send notifications to associated devices (Group 1) when the state of LED Bulb is changed.

Enable to send notifications to associated devices (Group 1) when the state of LED Bulb is changed. 0 = Nothing. 1= Basic CC report.

81

2

2700

The user can configure the parameter to adjust the color component Warm White.

The user can configure the parameter to adjust the color component Warm White. Value range =Warm White(0x0A8C(2700k) ~ 0x1387 (4999k))

82

2

6500

The user can configure the parameter to adjust the color component Cold White.

The user can configure the parameter to adjust the color component Cold White. Value rang = Cold White (0x1388 (5000k) ~ 0x1964 (6500k))

Association Group Info

COMMAND_CLASS_ASSOCIATION_GRP_INFO

Association V2

COMMAND_CLASS_ASSOCIATION_V2

Basic

COMMAND_CLASS_BASIC

Configuration

COMMAND_CLASS_CONFIGURATION

Device Reset Locally

COMMAND_CLASS_DEVICE_RESET_LOCALLY

Firmware Update Meta-Data V2

COMMAND_CLASS_FIRMWARE_UPDATE_MD_V2

Manufacturer Specific V2

COMMAND_CLASS_MANUFACTURER_SPECIFIC_V2

Powerlevel

COMMAND_CLASS_POWERLEVEL

Security S0

COMMAND_CLASS_SECURITY

Switch All

COMMAND_CLASS_SWITCH_ALL

Switch Color

COMMAND_CLASS_SWITCH_COLOR

Switch Multilevel V2

COMMAND_CLASS_SWITCH_MULTILEVEL_V2

Version V2

COMMAND_CLASS_VERSION_V2

Z-Wave Plus Info V2

COMMAND_CLASS_ZWAVEPLUS_INFO_V2

Exclusion

Remove for exclusion

1. Assuming led bulb was added to controller.

2. Triggered by OFF -> ON -> OFF -> ON -> OFF -> ON (between 0.5-2 seconds each time).

3. LED Solid Purple/Violet Color (0xEE82EE) during the unpairing process. (Timeout is 10 seconds).

 Failure:

Blinks between 100% White and Red 0x0000FF color for 3 seconds (at a rate of 200ms per flash), Once 3 seconds have passed, the LED should return to the last color ( memory status(color cc set)) of LED Bulb.

 Success:

Blinks between 100% White and Blue 0x0000FF color for 3 seconds (at a rate of 200ms per flash). Once 3 seconds have passed, the LED should return to a Warm White LED at 100%.

Factory Reset

Reset the Device.

1. Assuming led bulb was added to controller and was power on.

2. RGBW bulb re-power 6 times (between 0.5-2 seconds each time).

Note: ON -> OFF -> ON -> OFF -> ON -> OFF -> ON -> OFF -> ON -> OFF -> ON -> OFF -> ON

3. If the 6th power on, the led bulb change to Yellow color(into pairing process ), which means that the reset factory settings are successf.

Using this action in case of the primary controller is missing or inoperable.

Inclusion

Add for inclusion

1. Ensure the led bulb has been excluded outside the network.

2. Triggered by OFF ->ON (between 0.5-2 seconds each time)

3. LED solid yellow Color (0xFFFF00) during the pairing(Timeout is 10 seconds).

 Failure:

Blinks between 100% White and Red 0x0000FF color for 3 seconds (at a rate of 200ms per flash), Once 3 seconds have passed, the LED should return to a Warm White LED at 100%

 Success:

Blinks between 100% White and Green 0x00FF00 color for 3 seconds (at a rate of 200ms per flash). Once 3 seconds have passed, the LED should return to a Warm White LED at 100%.

Color

If the product is only available in one color, pick the color from the list.

Firmware Updatable

Indicates whether the firmware can be updated and whether it is done by the consumer or a technician.

Switch Load Capacity Watts

The amount of switch load energy the product is rated for in Watts