GSM telephone dialer that increases...
GSM telephone dialer that increases the capacity to call via GSM and send SMS. 5 input signals. 2 outputs. It admits 10 voice announcements of up to 15 seconds, by different users (up to 5) and type of input. Supports remote control of equipment by call.
Warning: Last items in stock!
|Z-Wave||Si (serie 400 o anterior: no Z-Wave Plus)|
The GSM DB-GSM-ESIM252 telephone dialer, with slot for 1 SIM card, available in DIN rail format, allows increasing the versatility of panels, home automation systems and technical alarms with the ability to call via GSM. Add SMS and automatic alert dialing. Allows remote control. If any of the 5 input signals is activated, it takes a call and / or an SMS message to the configured phone numbers. Supports 10 voice announcements of up to 15 seconds, each by different users and input type. Supports remote control of equipment by call.
It allows the supervision of electrical, home automation, electrical and control devices. It can report about equipment failure or technical signal. Allows remote control device by phone call or SMS. Security, home automation, inmotics, technical alarms in general, servers or simply lighting, heating, garden irrigation system, greenhouse irrigation system, roof gardens and garage door control through a mobile phone are just some application examples.
Supports configuration via USB and SMS. There is an Eldes configuration tool for quick and easy setup. Ability to add users and change settings later with simple short messages too. Conveniently access event logs via the Internet.
You can add GSM GPRS and functionality to almost any security control panel. Expand system capabilities with SMS alerts, automated phone calls, and Internet event logs.
This GSM dialer has 5 inputs and 2 relay outputs.
It can complement smoke detection and similar systems with GSM capabilities. Alert about fire, danger of flooding or the stoppage of an electrical appliance through a simple call or SMS, this helps you react quickly and avoid further damage to your property.
Up to 5 users can use this GSM system. Up to 10 autodial messages can be prerecorded. Configure which different users / phones will receive alerts about the devices they are responsible for. Choose between automatic call or SMS, maybe you prefer to receive status alerts from both + about device reboots and failures. For example: Inform yourself when the food vending machine is full of coins by SMS, this will help you avoid unnecessary checking, or monitor the ventilation system in your shopping center accurately. The system reports about device errors as well. For example: Traffic management company will be informed if the unexpected failure happens.
|Dimensions||20 × 10 × 5 cm|