Micromodule 1 relay On / Off, Qubino...
Micromodule 1 relay On / Off, Qubino Flush 1D is used to turn on / off, with Z-Wave Plus technology. The output contact is voltage free (D = Dry; dry contact), so we are talking about a dry contact relay
Warning: Last items in stock!
The Qubino Flush 1D relay is ideal as a dry contact switch for lights, fans, ovens, washing machines, irons, sockets, garage doors, electric radiators, water heaters, etc. The output contact is voltage-free (dry contact). Different loads can be connected to the module. It also supports the connection of a digital temperature sensor.
As the output contact is voltage free (dry contact), loads with different voltages and / or power supplies can be connected to the module.
It is a micromodule that allows us to use its relay both with 230V current and 12 or 24V, and even as a dry contact because the relay circuit is independent (electrically isolated). We remind you that previously for dry contact we had the Fibaro 1 × 2,5kW module that has been replaced by the "Single Relay" but that the latter no longer allows to be used as a dry contact, so this module of Qubino becomes even more interesting if it fits. (September 2016).
The Qubino Flush 1D is ideal for home automation control of electrical appliances such as lights, fans, ovens, washing machines, irons, sockets, garage doors, electric radiators, water heaters and the like.
The Z-Wave dry contact relay Qubino Flush 1D is a micromodule that occupies less space than any other module with which it is compared to any other competitor and will fit easily into any conventional mechanism box.
The Z-Wave Qubino Flush 1D dry contact relay , when it is in standby, only consumes 0.4 W. Awesome!
The Qubino Flush 1D , dry contact relay, can operate over a wide range of temperatures from cold -10ÚC to suffocating 40ÚC (14Ú 104ÚF). It supports the connection of a digital temperature sensor, which is also useful for creating complex scenarios. Each module also acts as a repeater in order to improve the range and stability of the Z-Wave network.
The extremely small size and a specially designed housing mean that the connection of the module inside a recessed mounting box is simple. The installation process, tested and approved by professional electricians , consists of only three simple steps:
1 - Remove the switches from the box and disconnect the cables.
2 - Connect the cables to the Qubino module and insert them into the box.
3 - Fix the switches to the box.
Qubino's Z-Wave modules are install-and-forget products. The Qubino products that we offer, are manufactured to last, so they only use electronic components that meet the most demanding levels of quality. Our modules are also the most tested Z-Wave micromodules on the market. The Slovenian Institute of Quality and Measurement (SIQ), an independent European entity, checks the quality of the actual parameters of our products, including temperature increases, manufacturing, insulation resistance, electrical consumption and overloads according to European standards of the highest quality according to the specification of standard EN 60669-2-1.
The Qubino Flush 1D micromodule It has 11 additional parameters for its use by experts. Some of the most useful are:
|Feeding:|| 110 230 VAC ± 10% |
50/60 Hz, (24 30 VDC)
|Maximum AC output load (resistive load) *||1 X 10 A / 230 VAC|
|Maximum DC output load (resistive load) *||1 X 10 A / 30 VDC|
|Output circuit power of AC output (resistive load):||2300 W (230 VAC)|
|Output circuit power of DC output (resistive load):||240 W (24 VDC)|
|Accuracy of the power measurement:||n / a|
|Digital temperature sensor range:||-50 ° ~ + 125 ° C, resolution 0.1 ° C|
|Cable length of the digital temperature sensor:||1000 mm|
|Operating Temperature:||-10 ° ~ + 40 ° C|
|Distance||up to 30 m indoors (depending on materials)|
|Dimensions (WxHxD)||41.8 x 36.8 x 15.4 mm|
|(packaging)||(115 x 96 x 22)|
|Weight (including packaging)||48 g (64 g)|
|Electric consumption on standby||0.4 W|
|For installation in mechanism boxes||Ø e 60 mm or 2 M|