No products
Prices are tax included
SLZB-06M
New
USB Ethernet POE Zigbee 3.0 device for easy and efficient integration of your home automation devices.
Out of stock
ZigBee | Si |
PoE | Si (Power Over Ethernet) |
SMLIGHT - Zigbee 3.0 USB Ethernet POE Adapter EFR32MG21 (Zigbee2mqtt and ZHA)
The SMLIGHT SLZB-06M represents a Zigbee to Ethernet/USB/WiFi adapter with POE support, pre-flashed and ready to use. It can be used as a Zigbee 3.0 gateway in open source automation platforms such as Zigbee2MQTT, Home Assistant, ZHA.
Operates in two modes: LAN and USB, with the ability to switch modes via firmware or a button. It allows multiple Zigbee coordinators to be added to a server, providing extended coverage and the ability to integrate them into a single Home Assistant instance.
The device can be powered via POE or Type-C, and a microUSB-Type-C adapter is included in the package.
The EFR32MG21 Zigbee SoC features +20 dB boost, with a +5 dB antenna included. Remote upgrades are possible for EFR32MG21 and ESP32, without requiring physical access to the device.
In addition, the ESP32 can be flashed via USB, with a built-in auto-flash function. To secure the connection to the web interface, a password can be configured.
In time, the M-version chip will be able to support both Zigbee and Matter/Thread
Highlights:
ZIGBEE TO LAN OR USB OR WIFI adapter based on EFR32MG21 and +20dB amplifier and 5dB antenna;
supports POE power but can also be powered by Type-C power or micro-USB with the connector that comes with the adapter;
A complete package including the device itself and the antenna, screws for fixing, screw aid, double-sided adhesive tapes and micro-USB-C-type adapter;
EFR23MG21 chip with +20dB amplifier; - 5dB antenna included
5dB antenna included;
cool tini design that can fit anywhere;
Paper box, safe delivery to your country;
intermittent Zigbee and ESP via LAN;
each device individually tested before shipment;
FUNCTIONS
Technical characteristics of the SMLIGHT SLZB-06M adapter
Zigbee 3.0 main chip: EFR32MG21 Silicon Labs
Main control chip: ESP32 Espressif
Specification:
USB/UART converter: CP2102
Ethernet Network: LAN8720
Output gain: +20 dB
Additional antenna gain: +5 dB
Ethernet support: Yes
Wi-Fi support: Yes
PoE Support: Yes
PoE Standard: IFFF802.3af (15 W)
USB Type-C Control: Yes
EPS32 Auto Start: Yes, via DTR/RTS
Pre-flashing: Yes, Zigbee and ESP
Zigbee 3.0 coordinator mode: Yes
Zigbee 3.0 Router Mode: Yes
Zigbee to Ethernet: Yes
Zigbee to USB: Yes
3 modes: Zigbee to Ethernet, WiFi or USB mode
In 15 languages
VPN support for the Wireguard plug-in for Home Assistant
Zigbee and Core live update, automatic scheduled updates
Secure connection, whitelist
Rich configurations and controls
Adjustable and sophisticated interface with light/dark modes
Integrated help for all configurations
For personal and professional use