Viewed products





Confianza Online


domoticalia.es/es/ Reviews with ekomi.es

stonet P124GC - PoE Switch 802.3af/at 24 Gigabit ports + 2 Gigabit SFP Slot Up to 320 W

P124GC

New

26 port standard POE switch providing 24 GE POE ports, 2
Uplink SFP ports. Ports 1~24 have POE power capability and can be used as
Power over Ethernet devices.

More details

In Stock

301,12 €

Technical characteristics

PoE Si (Power Over Ethernet)

More info

Stonet P124GC is a standard 26-port POE switch that provides 24 GE POE ports, 2
Uplink SFP ports. Ports 1~24 have POE power capability and can be used as
Power over Ethernet devices. The power port can automatically detect and recognize
automatically recognize the powered device that is compliant with the IEEE 802.3af/at standard and supply
power through the network cable. 2 SFP uplink ports support both fiber optic
optical fiber or network cables with different modules, gigabit transmission speed ensures smooth transmission for NVR or up-link.
for NVRs or uplink routers. P124GC is a more powerful solution for HD
and high-speed wireless network systems.

Switch Stonet P124GC PoE 24 Giga (Power Over Ethernet)
24 Gigabit PoE 802.3 af/at ports (15/30W) and up to 320 W+ Giga SFP Slot
Rack 19 format, includes lugs
Internal power supply 110-240 V 50/60 Hz
MAC Address Table 8 Kb., Switching 52 Gbps; Jumbo Frame 2 Mb.
Supports 802.3x Full Duplex and Flow Control
Protection against discharges, lightning and ESD
Includes DIP normal mode/Watch Dog/VLAN

FEATURES
- Compatible with 802.3, 802.u Faster Ethernet, IEEE 802.3ab 1000BASE-T
- Supports IEEE 802.3af/at compliant POE Powered Devices (PDs)
- Modes: Normal switch mode / Watchdog model (automatically manages CCTV cameras
power)/VLAN model
- 1~24 gigabit ports have POE power capability and can be used as
Power over Ethernet devices 2*1000Base-X SFP.
- Supports full duplex based on IEEE802.3x and half duplex based on Backpressure
- Auto MDI/MDIX crossover for all ports
- Supports non-blocking wire-speed forwarding
- Auto-learning and auto-aging of MAC addresses
- Steel casing, the total POE power budget of 320W
-Plug and Play

SPECIFICATION
Hardware
Interface 24*10/100M/1000M POE ports (Data/Power)
2*1000M uplink SFP slot port (Data)
Basic function
Follow IEEE 802.3 Ethernet and IEEE802.3u Fast Ethernet Protocol
Supports POE IEEE 802.3af/at compliant Powered Device (PD)
Store-and-forward switching scheme
Support IEEE802.3X full duplex and Backpressure half duplex
MAC address auto-learning & auto-aging
standards
IEEE 802.3 10BASE-T Ethernet
IEEE 802.3i 10BASE-T Ethernet
IEEE 802.3u 100BASE-TX Fast Ethernet
IEEE 802.3ab 1000BASE-T Gigabit Ethernet
IEEE 802.3af/at, Power over Ethernet
IEEE 802.3x Flow Control
Mode Normal switch mode//VLAN&watch dog model
Data Transfer Rate
Ethernet : 10Mbps(Half-duplex);20Mbps(Full-duplex)
Fast Ethernet :100Mbps(Half-duplex);200Mbps(Full-duplex)
Gigabit Ethernet: 2000Mbps(Full-duplex)
Store & Forwarding Yes
Switching Capacity 52G
MAC Address
Table Size 8K
Jumbo Frame 2048 byte
environment
Operation Temperature 0 ^40
Storage Temperature -40 ^70
Operation Humidity 10%^90% RH Non-condensing
Storage Humidity 5%^90% RH Non-condensing
Power Input POE
standards
Single port maximum power 30W,
Whole switch maximum power 320W
Supporting over-current, over-voltage and short-circuit protection
Supporting Soft Start of High Power PD
Support sequential boot-up
Power Supply Pin:12+/36-
AC 110~240V 50/60HZ
Cabling type
1000BASE-T : Cat5e or better UTP(d100m)
100Base-TX: Cat 5e or better UTP/STP(d100m)
10Base-TX: Cat 5e or better UTP/STP(d250m)
Dimensions 440mm*180mm*43mm(L x W x H )

Reviews

Write a review

stonet P124GC - PoE Switch 802.3af/at 24 Gigabit ports + 2 Gigabit SFP Slot Up to 320 W

stonet P124GC - PoE Switch 802.3af/at 24 Gigabit ports + 2 Gigabit SFP Slot Up to 320 W

26 port standard POE switch providing 24 GE POE ports, 2
Uplink SFP ports. Ports 1~24 have POE power capability and can be used as
Power over Ethernet devices.

30 other products in the same category: