Viewed products





Confianza Online


domoticalia.es/es/ Reviews with ekomi.es

QUBINO DIN RAIL Dimmer Z-Wave Plus

ZMNHSD1

New

Regulator module or dimmer Z-Wave + QUBINO DIN Dimmer for mounting in electrical panel by DIN rail with consumption measurement.

More details

In Stock

80,52 €

-12%

91,50 €

Technical characteristics

Technology Z-Wave Plus
Characteristic Dimmer

More info

Qubino DIN Dimmer: First Z-Wave regulator for rail, truly universal

The Z-Wave controller, Qubino DIN Dimmer is a dimmer for DIN rail installation for light bulbs or fans. You can control it remotely through the Z-Wave network or through wall switches.

What is it for?

The Qubino DIN Dimmer is a dimmer mounted on DIN rail, ideal for remotely controlling and measuring the energy consumption of bulbs or fans. It also supports the connection of a digital temperature sensor.

The smallest Z-Wave DIN rail dimmer

The dimmer Z-Wave Qubino DIN Dimmer is a module for DIN rail that occupies less space than any other module for box with which it is compared to any other competitor and fit easily in less space than it seems in an electrical box with DIN rail .

Qubino din dimmer

Energy control

The dimmer Z-Wave Qubino DIN Dimmer , makes measurement of electrical consumption of the connected electrical device and of itself, when it is in "standby" it only consumes 0.7 W.

Very versatile

The Qubino DIN Dimmer , can operate through a wide range of temperatures from cold -10ÚC to suffocating 40ÚC (14Ú 104ÚF). It supports the connection of a digital temperature sensor, which is also useful for creating complex scenarios. Each module also acts as a repeater in order to improve the range and stability of the Z-Wave network.

The simplest installation

The Qubino DIN Dimmer module occupies a smaller volume than comparable modules of any other brand and fits easily on any DIN rail. The installation process, tested and approved by professional electricians , is as easy and convenient as any other rail module.

Installation Qubino DIN Dimmer

The most proven and reliable Z-Wave modules

Qubino's Z-Wave modules are install-and-forget products. The Qubino products that we offer, are manufactured to last, so they only use electronic components that meet the most demanding levels of quality. Our modules are also the most tested Z-Wave micromodules on the market. The Slovenian Institute of Quality and Measurement (SIQ), an independent European entity, checks the quality of the actual parameters of our products, including temperature increases, manufacturing, insulation resistance, electrical consumption and overloads according to European standards of the highest quality according to the specification of standard EN 60669-2-1.

Additional parameters for professionals

The Qubino DIN Dimmer module   It has 17 additional parameters for its use by experts. Some of the most useful are:

  • Automatic on / off output after set time
  • Change between the type of input normally open and normally closed
  • Save the state of the device after a power cut

This Z-Wave module is used to control and regulate lamps or to control the speed of a fan. It can be controlled either wirelessly (without wires) through the Z-Wave network or through a wall switch connected to it.
The module is designed to be mounted inside a cabinet or electrical rack on a DIN rail. It also measures the energy consumption of the connected loads. It also has an input for the connection of a temperature sensor that can be purchased separately.
The Qubino DIN Dimmer is also designed to act as a repeater to improve the range and stability of the Z-Wave network.
Finally, it should be noted that the brand QUBINO has established strong commitments in quality and sustainability: the high performance components have been carefully selected. Multiple quality control tests were also carried out on the module to ensure maximum durability (tough enough to operate at temperatures from -10 ° C to +40 ° C).

Schematic of connection to 220AC and 24V DC

Connection diagram dimmer for DIN railQubino din dimmer electrical diagram

FUNCTIONS:


Control and regulate remote lighting or other devices susceptible to regulation
It is placed towards the electrical panel, installed on DIN rail
Enables ON / OFF / DIM
Uses MOSFET technology: compatible with low voltage halogen lamps with electronic transformer, dimmable compact fluorescent lamps and dimmable LED
Integrates the 500 chip series (Z-Wave +)
Communication 250% faster compared to standard Z-Wave devices
The world's first Z-Wave DIN rail unit
Very low power consumption of up to 0.7W
Operating temperature -10 to 40 ° C
Analog temperature sensor connector
Integrates energy consumption measurement

TECHNICAL CHARACTERISTICS:

Feeding: 110 230 VAC ± 10%
50/60 Hz, (24 30 VDC)

Maximum AC output load (resistive load) *

0.85 A / 230 VAC
Maximum DC output load (resistive load) * 0.85 A / 30 VDC
Output circuit power of AC output (resistive load): 200 W (230 VAC)
Output circuit power of DC output (resistive load): 21 W (24 VDC)
Accuracy of the power measurement: +/- 2 W
Digital temperature sensor range: -50 ° ~ + 125 ° C, resolution 0.1 ° C
Cable length of the digital temperature sensor: 1000 mm
Operating Temperature: -10 ° ~ + 40 ° C
Distance up to 30 m indoors (depending on materials)
Dimensions (WxHxD) 18 x 93 x 58 mm
(packaging) (21 x 95 x 64 mm)
Weight (including packaging) 50 g (56 g)
Electric consumption on standby 0.7 W
Mounting DIN rail
Switching by: MOSFET (trailing edge)



Meets CE and ROHS Certifications

Download

Extended Z-Wave info

Name: DIN Dimmer
Manufacturer:QUBINO
Identifier:ZMNHSD1
Z-Wave Certification Number:ZC10-17035480
Hardware Plattform:ZM5202
FLiRS:NO
Role Type:Always On Slave
Short Description:DIN Dimmer is a DIN rail mounted dimmer for light bulbs. You can control it either remotely through the Z-Wave network or through wall switches. It also measures power consumption and supports the connection of a digital temperature sensor.
Description:DIN Dimmer is a DIN rail mounted dimmer for light bulbs. You can control it either remotely through the Z-Wave network or through wall switches. It also measures power consumption and supports the connection of a digital temperature sensor.

Manual download HERE.

Group
Max Nodes
Description
1
1
Lifeline group (reserved for communication with the main controller)
2
16
Basic on/off (triggered at change of the input I1 state and reflecting its state)
3
16
Start level change/stop level change (triggered at change of the input I1 state and reflecting its state)
4
16
Multilevel set (triggered at changes of state/value of the DIN Dimmer)
5
16
Multilevel sensor report (triggered at change of temperature sensor)
Number
Size (Bytes)
Default Value
Name
Description
1
1
0
Input switch type
Available configuration parameters (data type is 1 Byte DEC): • default value 0 • 0 - mono-stable switch type (push button) • 1 - bi-stable switch type
10
2
255
Activate / deactivate functions ALL ON / ALL OFF
DIN Dimmer module responds to commands ALL ON / ALL OFF that may be sent by the main controller or by other controller belonging to the system.
11
2
0
Automatic turning off output after set time
Turns off the output after set time.
110
2
32536
Temperature sensor offset settings
Set value is added or subtracted to actual measured value by sensor. Available configuration parameters (data type is 2 Byte DEC): • default value = 32536 • 32536 = offset is 0.0C • 1 - 100 = value from 0.1 °C to 10.0 °C is added to actual measured temperature. • 1001 - 1100 = value from -0.1 °C to -10.0 °C is subtracted to actual measured temperature.
12
2
0
Automatic turning on output after set time
Turns on the output after set time.
120
1
5
Digital temperature sensor reporting
Digital temperature sensor reporting If digital temperature sensor is connected, module reports measured temperature on temperature change defined by this parameter. Available configuration parameters (data type is 1 Byte DEC): • default value 5 = 0,5°C change • 0 = reporting disabled • 1- 127 = 0,1°C - 12,7°C, step is 0,1°C
21
1
0
Enable/Disable Double click function
If Double click function is enabled, a fast double click on the push button will set dimming power at maximum dimming value.
30
1
0
Saving the state of the device after a power failure
Based on the parameter settings the stores/does not store the last value of the output after power failure.
40
1
5
Power reporting in Watts on power change
Set value means percentage, set value from 0 - 100=0% - 100%. Power report is send (push) only when actual power in Watts in real time changes for more than set percentage comparing to previous actual power in Watts, step is 1%. NOTE: if power changed is less than 1W, the report is not send (pushed), independent of percentage set.
42
2
0
Power reporting in Watts by time interval
Set value means time interval (0 – 32767) in seconds, when power report is send. Reporting enabled. Power report is send with time interval set by entered value. Please note, that too fast reporting can cause too much Z-Wave traffic resulting in Z-Wave poor response.
5
1
0
Working mode
With this parameter is possible to change the module presentation on the user interface NOTE: After parameter change, first exclude module (without setting parameters to default value) then wait at least 30s and then re include the module!
60
1
1
Minimum dimming value
The minimum level may not be higher than the maximum level! 1% min. dimming value is defined by Z-Wave multilevel device class. When the switch type is selected as Bi-stable, it is not possible to dim the value between min and max. If Switch_multilevel_set is set to the value “0”, the output is turned OFF. If Switch_multilevel_set is set to the value “1”, the output is set to the minimum diming value.
61
1
99
Maximum dimming value
The maximum level may not be lower than the minimum level! 99% max. dimming value is defined by Z-Wave multilevel device class. When the switch type is selected as Bi-stable, it is not possible to dim the value between min and max.
65
2
100
Dimming time (soft on/off)
Set value means time of moving the DIN Dimmer between min. and max. dimming values by short press of push button I or controlled through UI (BasicSet).
66
2
3
Dimming time when key pressed
Time of moving the DIN Dimmer between min. and max dimming values by continues hold of push button I or associated device.
67
1
0
Ignore start level
This parameter is used with association group 3.A receiving device SHOULD respect the start level if the Ignore Start Level bit is 0. A receiving device MUST ignore the start level if the Ignore Start Level bit is 1.
68
1
0
Dimming duration
This parameter is used with association group 3. The Duration field MUST specify the time that the transition should take from the current value to the new target value. A supporting device SHOULD respect the specified Duration value.
Basic
COMMAND_CLASS_BASIC
Switch Multilevel V3
COMMAND_CLASS_SWITCH_MULTILEVEL_V3
Association Group Information V2
COMMAND_CLASS_ASSOCIATION_GRP_INFO_V2
Association V2
COMMAND_CLASS_ASSOCIATION_V2
Basic
COMMAND_CLASS_BASIC
Configuration
COMMAND_CLASS_CONFIGURATION
Device Reset Locally
COMMAND_CLASS_DEVICE_RESET_LOCALLY
Manufacturer Specific V2
COMMAND_CLASS_MANUFACTURER_SPECIFIC_V2
Meter V4
COMMAND_CLASS_METER_V4
Multi-Channel Association V3
COMMAND_CLASS_MULTI_CHANNEL_ASSOCIATION_V3
Multi-Channel V4
COMMAND_CLASS_MULTI_CHANNEL_V4
Powerlevel
COMMAND_CLASS_POWERLEVEL
Security S0
COMMAND_CLASS_SECURITY
Sensor Multilevel V7
COMMAND_CLASS_SENSOR_MULTILEVEL_V7
Switch All
COMMAND_CLASS_SWITCH_ALL
Switch Binary
COMMAND_CLASS_SWITCH_BINARY
Switch Multilevel V3
COMMAND_CLASS_SWITCH_MULTILEVEL_V3
Version V2
COMMAND_CLASS_VERSION_V2
Z-Wave Plus Info V2
COMMAND_CLASS_ZWAVEPLUS_INFO_V2
Exclusion
• Connect module to power supply

• bring module within maximum 1 meter (3 feet) of the main controller,

• enable add/remove mode on main controller,

• press push button I1 five times within 3s (5 times change switch state within 3 seconds) in the first 60 seconds after the module is connected to the power supply or

• press service button S (only applicable for 24 V SELV supply voltage) for more than 6 second.

By this function all parameters of the module are set to default values and own ID is deleted.

If push button I1 is pressed three times within 3s (or service button S is pressed more than 2 and less than 6 seconds) module is excluded, but configuration parameters are not set to default values.



NOTE 1: If the module is included with parameter 1 value 3, 4 or 5 and module reset is done, wait at least 30s before next inclusion.



NOTE 2: Please use this procedure only when the network primary controller is missing or otherwise inoperable.

Inclusion
• Connect module to power supply (with

temperature sensor connected - if purchased),

• enable add/remove mode on main controller

• auto-inclusion (works for about 5 seconds after connected to power supply) or

• press service button S for more than 2 second or

• press push button I1 three times within 3s (3 times change switch state within 3 seconds).



NOTE1: For auto-inclusion procedure, first set main controller into inclusion mode and then connect module to power supply.

NOTE2: When connecting temperature sensor to module that has already been included, you have to exclude module first. Switch off power supply, connect the sensor and re-include the module.

Factory Reset
• Press push button I1 five times within 3s (5 times change switch state within 3 seconds) in the first 60 seconds after the module is connected to the power supply or

• press service button S (only applicable for 24 V SELV supply voltage) for more than 6 second.



Please use this procedure only when the network primary controller is missing or otherwise inoperable.

Switch Type
Describes the type of operator for a switch.
Color
If the product is only available in one color, pick the color from the list.
Sensors
Sensor types supported by the product.

 

Reviews

Write a review

QUBINO DIN RAIL Dimmer Z-Wave Plus

QUBINO DIN RAIL Dimmer Z-Wave Plus

Regulator module or dimmer Z-Wave + QUBINO DIN Dimmer for mounting in electrical panel by DIN rail with consumption measurement.

Accessories

18 other products in the same category:

Customers who bought this product also bought: