Aeotec Door / Window Sensor 7 - Opening and inclination sensor for door or window

Door opening sensor Z-Wave + Aeotec Door / Window Sesnsor 7

The door and window sensor Aeotec Door / Window Sesnsor 7 is a sensor that detects if the window is open, closed or tilted, which requires an angle of inclination of at least 5 °. The sensor is easily adaptable. In addition, the Aeotec door / window sensor 7 can include other sensors connecting to other binary sensors such as NTC contacts, microswitches or a flood sensor.

Thanks to its slim design, the Aeotec 7 door / window sensor can be easily installed in any window. The sensor must be installed simply on the window leaf. In addition, a thin magnet should be installed near the sensor in the window frame.

With potential-free input, the Aeotec 7 door / window sensor can also include other sensors in its Z-Wave system. To do this, the binary sensor is connected to the potential-free input of the sensor. In addition to the sensors, it is also possible to connect pushbuttons, which control the scenes of the Z-Wave home automation controller.

FUNCTIONS:

Detection of opening, closing or tilting
Integrated vandal protection
Binary potential-free input for the connection of external sensors
Battery life up to 3 years
Z-Wave Smart Start and S2 Security Technologies
Tilt angle of at least 5 °.
Small, discreet and aesthetic
Easy to use and install
Button to include / exclude the detector
Low battery detection

TECHNICAL SPECIFICATIONS

Power: 1/2 AA battery
Battery life: 3 years, assuming 5 open events and 5 closed days with the wake-up reports deactivated.
Radio frequency: 868.42 MHz
Operating distance: up to 50 meters outdoors
Tilt detection: must be greater than 5 degrees
Operating humidity: 10 to 95%.
Operating temperature: -20 ° C to 45 ° C
Dimensions:
Sensor: 19 x 71 x 18 mm
Magnet: 8 x 20 x 11 mm