Support of High Traffic Density in an AP for Professional use
The ECW115, 11ac Wave 2, Indoor Wireless Access Point with Cloud Management offers blazing fast 1.3 Gbps speeds and increased user capacity. Increases performance by up to 30% over traditional 2x2 APs. This dual-band AP improves connection reliability for an exceptional generation of enterprise-class Wi-Fi. Wall, ceiling and electrical socket mounting.
Technical specifications
Radio and Wireless Specifications
Operating frequency
2.4 GHz and 5 GHz Concurrent Dual Radio
Modes of operation
AP, AP Mesh, Mesh
Frequency radio
2.4 GHz: 2400 MHz ~ 2482 MHz
5 GHz: 5150 MHz ~ 5250 MHz, 5250 MHz ~ 5350 MHz, 5470 MHz ~ 5725 MHz, 5725 MHz ~ 5850 MHz
Transmit energy
Up to 17 dBm at 2.4 GHz
Up to 17 dBm at 5 GHz
(Maximum power is limited by regulatory domain)
Tx Beamforming (TxBF)
Radio chains / space currents
2 × 2: 2
SU-MIMO
Two (2) single-user (SU) MIMO spatial streams for up to 400 Mbps wireless data rate with VHT40 bandwidth to a 2 × 2 wireless device under the 2.4 GHz radio. Two (2) Single User (SU) MIMO spatial streams for a wireless data rate of up to 867 Mbps with VHT80 to a 2 × 2 wireless device under the 5 GHz radio.
MU-MIMO
Two (2) MU-MIMO spatial streams up to 867 Mbps wireless data rate to transmit to two (2) MU-MIMO streams capable of wireless devices less than 5 GHz simultaneously.
Supported data rates (Mbps):
2.4 GHz: Maximum 400 (MCS0 to MCS11, NSS = 1 to 2)
5 GHz: Max 867 (MCS0 to MSC11, NSS = 1 to 2)
802.11b: 1, 2, 5.5, 11
802.11a / g: 6, 9, 12, 18, 36, 48, 54
802.11n: 6.5 to 300 Mbps (MCS0 to MCS15) (25% additional bandwidth when enabling 256-QAM uner HT40)
802.11ac: 6.5 to 867 Mbps (MCS0 to MCS9, NSS = 1 to 2)
Supported radio technologies
802.11a / g / n / ac: Orthogonal Frequency Division Multiplexing (OFDM)
802.11b: Direct Sequence Scattering Spectrum (DSSS)
802.11n / ac: 2 × 2 MIMO with 2 currents
Canalization
802.11ac supports very high performance (VHT) -VHT 20/40/80 MHz
802.11n supports high performance (HT) -HT 20/40 MHz
802.11n supports very high performance (VHT) under the 2.4 GHz radio - VHT 40 MHz (256-QAM)
802.11n / ac Packet Aggregation: A-MPDU, A-SPDU
Modulation supported
802.11ac: BPSK, QPSK, 16-QAM, 64-QAM, 256-QAM
802.11a / g / n: BPSK, QPSK, 16-QAM, 64-QAM
802.11b: BPSK, QPSK, CCK
Management features
Multiple BSSIDs
8 SSID in both 2.4 GHz and 5 GHz bands
VLAN tagging
Supports SSID tagging to 802.1q VLANs
Pass-through VLAN
VLAN management
Spanning Tree
Supports Spanning Tree 802.1d protocol
QoS (Quality of Service)
Complaint with IEEE 802.11e standard
WMM
SNMP
v1, v2c, v3
MY B
I / II, private MIB
Fast roaming
802.11r / k
Wireless security
WPA2-PSK
WPA2-Company
Hide SSID in headlights
MAC address filtering, up to 32 MAC per SSID
Wireless STA (Client) Connection List
Https
SSH tunnel
Customer isolation
Environmental and Physical
Temperature range
Operating: 32ºF ~ 104ºF (0 ºC ~ 40 ºC)
Storage: -40ºF ~ 176ºF (-40ºC ~ 80ºC)
Humidity (without condensation)
Operating: 90% or less
Storage: 90% or less
Dimensions and weight
ECW115 device
Weight: 225g
Width: 140mm
Length: 90mm
Height: 40mm
Package content
1 - ECW115 Cloud Managed Indoor Access Point
1 - Connecting plate (short)
1 - Connecting plate (high)
1 - Mounting screw kit
1 - Quick Installation Guide
Regulatory compliance
FCC
EC
IC
Warranty
2 years