Shelly Qubino Wave Pro Dimmer 1PM

The device is a single-channel, DIN rail-mountable smart dimmer. It can operate independently or via Z-Wave® home automation. The device can be accessed, controlled, and monitored remotely from anywhere the user has an internet connection. It is compatible with switches and pushbuttons (by default).

Type of regulation: Trailing edge
Power measurement
Automatic attenuation calibration
Input mode switch/button
Use with existing switches (one or two button control)
Adjustable minimum/maximum brightness
Adjustable speed and transition time
DIN rail mounting
Extremely low power consumption: < 0.3 W
Z-Wave frequency band: 868.4 MHz (CEPT countries)
Latest technology: Z-Wave 800 Series
Automatic setup with SmartStart
Authenticated Security 2 for the highest level of security
Over-the-air firmware updates
It works with Z-Wave certified gateways and over 4,000 Z-Wave devices
*A gateway (smart hub) is not included. A gateway (smart hub) is required for device setup.
Technical details

Supported load types
Dimmable LED bulbs: up to 200W

Incandescent light bulbs: up to 200 W

Halogen lamps: up to 200 W

Transformer with iron core and low voltage incandescent lamps: up to 200VA

Adjustable electronic transformers: 200 W

Specs
Feeding

110 - 240 V AC, 50/60 Hz

Electricity consumption

< 0.3 W

External protection

10 A, trip characteristic B or C,
6 kA interrupting capacity,
Energy limitation class 3

Type of regulation

Leaving edge

Power measurement [W]

Yeah

Max. output power

200 W

Overheating protection

Yeah

Overload protection

Yeah

Overvoltage protection

Yeah

Distance

Up to 40 m indoors (131 ft) (depending on local conditions)

Z-Wave Repeater

Yeah

CPU

Z-Wave® S800

Z-Wave frequency bands

868.4 MHz

Maximum radio frequency power transmitted in frequency band(s)

< 25 mW

Size (H x W x D)

94x19x69±0.5mm/3.70x0.75x2.71±0.02in

Weight

75 g / 2.7 oz

Mounting

DIN rail

Screw terminals Max. tightening torque

0.4 Nm / 3.54 lbin

Driver's section

0.5 to 2.5 mm² / 20 to 14 AWG (green connector)
0.5 to 1.5 mm² / 20 to 16 AWG (white connector) (solid, stranded and ferrules)

Length of bare conductor

6 to 7 mm / 0.24 to 0.28 in (green connector)
5 to 6 mm / 0.20 to 0.24 inches (white connectors)

Housing material

Plastic

Color

Lime

Ambient temperature

-20°C to 40°C / -5°F to 105°F

Humidity

30% to 70% HR

Maximum altitude

2000 m / 6562 ft