Viewed products

Confianza Online Reviews with

AJAX MotionCam Outdoor



Wireless outdoor motion detector with a camera to verify alarms

More details

In Stock

315,08 €

More info


Ultra-fast alarms. Verified.

AJAX MotionCam Outdoor recognizes the intrusion from the first steps in the area and confirms it with an animated series of photos. Visual verification helps to instantly determine the situation, avoiding user concerns and unnecessary referrals to monitoring centers.
MotionCam Outdoor requires AJAX Hub 2 or AJAX Hub 2 Plus for operation

Don't miss a thing

By combining the best optics, a fast processor and advanced software algorithms, MotionCam Outdoor takes informative images in any weather, both day and night.

Smart filter for false alarms

MotionCam Outdoor is equipped with two independent PIR sensors, the signals of which are analyzed by a two-step LISA algorithm. As soon as both sensors detect motion, LISA performs correlation analysis and spectral analysis of the signals, helping to instantly distinguish real threats from interference.

Correlation analysis

Every time Motion! AmOutdoor detects motion, LISA analyzes and compares signal shapes from two sensors in real time. If the shapes are similar, the alarm goes off.

Multi-level protection against sabotage

MotionCam Outdoor cannot be deactivated imperceptibly even if the system is disarmed. The detector is equipped with masking sensors that react to blocking, covering and painting the lens.

It will take less than a minute 1 for the hub to detect the loss of communication with the detector and report the problem to a central monitoring station and users. The fact that MotionCam Outdoor has been disassembled will be known instantly.

Effective safety in any weather

MotionCam Outdoor resists heat up to + 60 °! and withstands the cold up to 25 ° !. And to protect the sensors of the anti-masking system from rain and snow, we have provided a special Hood.

Uncompromising communication reliability

MotionCam Outdoor uses two secure radio protocols simultaneously: Jeweler and Wings. Radio protocols work independently of each other and each is focused on its own function. Jeweler transmits alarms in 0.15 seconds, and thanks to Wings, the first photo of the site will be in the app in less than 9 seconds 2 .
The radio signal range is sufficient to install the detector where it will be most effective. And up to 3 years of battery life minimizes maintenance efforts.

Less manual work. More settings in the app.

The MotionCam Outdoor connection and setup process saves installation engineers time in the best possible way. To add a detector to the system, all you have to do is scan the QR code with the Ajax app, assign it a name and a room. Configure the device in the app in real time, test the detection zones and communication. If necessary, you can disable the detector or reconfigure its system parameters remotely, without visiting the site.

Technical specifications

Safety detector with electro-optical radio channel
Detector type
Installation method
Exterior Interior
Recommended installation height
0.8 1.3 m
Hub 2, Hub 2 Plus

Does not work with ReX radio signal repeater
2 PIR sensors
Motion detection distance
Adjustable, from 3 to 15 m
Pet immunity
Animals up to 80 cm tall
3 adjustable levels
Motion detector viewing angle
Horizontal 88.5 °
Vertical 80 °
Camera angle
Horizontal 105 °
Vertical 102 °
On tap, 77%
Photo in case of alarm
Photo resolution:

  • 320 × 176 pixels (default)
  • 640 × 352 pixels

Photographic series of up to 5 photos

Infrared illumination for taking photos in the dark
4 CR123A batteries
Supply voltage
3 V
Battery duration
Up to 3 years (up to 2.5 years if the Entry Delay setting is enabled)
Jeweler radio technology
Communication range with the hub up to 1700 m in open spaces
Two-way communication between hub and detector
Operating frequencies 868.0 868.6 MHz 3
Self-adjusting radio frequency output power up to 20mW
Block encryption with a dynamic key
Detector polling period 12 300 s
Frequency hopping

Alarm reception time
0.15 s
Wings radio technology
Transmission of a photographic series
Photo reception time with default settings: up to 9 seconds
Temperature sensor
Operating temperature range
25 °! at + 60 °!
Operating humidity
Up to 95%
Protection classification
Counterfeit protection
Inhibition detection
Tamper resistant
Remote configuration and testing
CRA compatibility
CRA Connectivity: Contact ID, SIA (DC-09)

CRA software supports visual alarm verification
206 × 108 × 93 mm
470 g
24 months from the date of sale
Complete team
MotionCam Outdoor motion detector
SmartBracket mounting panel
Hood visor
4 x CR123A batteries (pre-installed)
Installation kit
User s guide
1 With a polling period between the hub and the detector of 12 seconds
2 The reception time of the photos depends on the resolution of the image, which is selected in the device settings
3 Depends on the region of sale


Write a review

AJAX MotionCam Outdoor

AJAX MotionCam Outdoor

Wireless outdoor motion detector with a camera to verify alarms

5 other products in the same category: