This Zigbee technology HAT for GPIO...
This Zigbee technology HAT for GPIO card allows you to control Zigbee home automation devices with a Raspberry PI.
Warning: Last items in stock!
The RaspBee II turns the Raspberry Pi into a universal Zigbee gateway. Its small size allows it to fit in standard Raspberry Pi cases.
Works without cloud
No registration required. Local control of devices, without Internet. All data, such as the status of lights, sensors, and switches, remains on the local network.
The Phoscon solution is compatible with a wide range of lighting, switches and sensors from Philips Hue, IKEA TRÅDFRI, Xiaomi Aqara, OSRAM SMART +, Busch-Jaeger, GIRA, JUNG, Paulmann and Paul Neuhaus.
RTC real time clock
Due to the fact that the Raspberry Pi does not have a PSTN, the system time may differ considerably from the actual time after a power or internet failure.
Automations, such as arming the alarm system from midnight, are then executed at the wrong time.
The RaspBee II, with its built-in battery, always guarantees the correct time.
Home automation systems
The RaspBee II has been integrated with the most popular smart home systems in the community (Jeedom, Domoticz, Home Assistant, FHEM, openHAB, Node-RED, ...).
The powerful integration allows for interesting automations and functions. For example, any Zigbee device can be used with HomeKit through Homebridge-hue.
Thanks to its power amplifier, the RaspBee II has an exceptional range. This allows the signal to pass through 2 to 3 rooms or floors, depending on the type of construction.
The most remote devices are connected via the Zigbee Mesh network. In this network, all mains powered Zigbee devices, such as lights and plugs, act as repeaters and can transmit the signal.
Gather Zigbee devices from various vendors
Guarantees the correct time even in the event of a power or internet outage
A cloud-free solution by design
Works with the most popular home automation systems
Wide signal range thanks to power amplifier
TECHNICAL SPECIFICATIONS :
Microcontroller: ATSAMR21B18 ARM® Cortex®-M0 +
Rated voltage: DC 5.0V
Maximum transmission power: 10mW 10mW
Signal range: 200m line of sight
Radio frequency: 2.4 GHz
Radio standard: IEEE 820.15.4 / Zigbee
Flash memory: 256 KB
Battery type: RTC 337 / SR416SW
Storage temperature: -20 ° C to 55 ° C
Operating temperature: -20 ° C to 55 ° C
Operating systems: Raspbian, Docker
Dimensions: 30mm × 18mm × 10mm
Warranty: 2 years