DCP1 WiFi Intelligent Flow and Shut-Off Controller for Water, Gas and Fluids

DCP1 WiFi Intelligent Flow and Shut-Off Controller for Water, Gas and Fluids

The DCP1 is an advanced WiFi controller for measuring consumption and controlling solenoid valves, designed to monitor and protect water, gas, or other fluid installations. It allows you to measure flow in real time, detect abnormal consumption, and perform automatic or remote shutoffs, all from the local network or integrated into your Fibaro/Nice HC3-based home automation system.

Ideal for residential, commercial or technical installations where safety and supply control are priorities.

DCP1 is a WiFi Module for reading pulse counters and controlling solenoid valves.
Real-time flow measurement, partial and total consumption calculation, programmable automatic shut-off, and 5A/230V relay. Direct integration with Home Assistant and Fibaro/Nice systems, plus the ability to operate autonomously via the web.

Total control of consumption and protection against leaks

The DCP1 not only counts counter pulses, but also:

• Calculate total accumulated consumption

• Measures flow per minute

• It records partial consumption in the last 5 minutes, 15 minutes and 1 hour

• It allows you to configure consumption limits for automatic cutoff without the need for an external controller.

• It saves data even in the event of a power failure.

A professional solution for leak prevention, excessive consumption detection and facility protection.

Advanced WiFi connectivity and easy setup

• 2.4 GHz WiFi communication

• Configuration mode with dedicated access point (AP) for quick setup

• Integrated configuration and control website (password protected)

• DHCP or static IP

• Auto-discovery by mDNS

• Remote firmware update via the internet

• Programmable periodic reset for maximum stability

In addition, it incorporates a connector for an external antenna, improving coverage in technical installations or electrical cabinets.

Home automation integration or autonomous operation

The DCP1 can operate completely autonomously or be easily integrated with:

• Home Assistant (secure TCP or TLS connections)

• Fibaro Home Center 3 / Fibaro Home Center 3 Lite

• Nice Yubii / Nice Yubii PRO

Thanks to its direct integration and specific plug-in, it becomes a powerful tool for Smart Home and smart building projects.

Control of solenoid valves and ON/OFF devices

It allows you to control:

• 2-position solenoid valves (3 wires)

• Solenoid-type solenoid valves

• Any ON/OFF device (permanent relay mode)

Internal relays up to 5A at 230V , allowing direct control of multiple applications.

Includes physical push button for manual control (disableable).

Simple and versatile installation

• Wall-mounted box with flaps and screws included

• Easy-to-install plug-in connector

• Flexible power supply from 9 to 28V

• Pulse input compatible with:

  • 0 to 50V

  • Potential-free contacts

• 5V output for powering Hall sensors

Configuration of:

• Pulses/unit of measurement ratio

• Texts and language

• Automatic cutting parameters

Recommended applications

• Water meter measurement

• Gas metering or pulse electricity meters

• Leak protection in homes and second homes

• Remote supply cutoff in empty homes

• Supply control in communities or commercial premises

• Integration into energy management systems

Security, control and savings in a single device

The DCP1 is designed for professionals seeking:

Leak protection
Advanced automation
Remote supply control
Professional home automation integration
Autonomous operation without dependence on third parties

A robust, versatile solution ready for professional installation projects.

Contribution to Sustainability and Water Efficiency Certifications

The DCP1 is a solution particularly suitable for projects that require monitoring, control and optimization of water consumption within the framework of environmental certifications and international sustainability standards.

Thanks to its ability to measure precisely by pulses, record partial and total consumption, and automatically shut off in case of abnormal consumption , it allows the implementation of active water efficiency strategies in residential, commercial and industrial buildings.

Application in environmental certification schemes

The use of measurement and control systems such as DCP1 facilitates the implementation of requirements related to efficient water management in certifications such as:

• LEED (Leadership in Energy and Environmental Design)

• BREEAM

• WELL Building Standard

• EDGE (Excellence in Design for Greater Efficiencies)

In these systems, sectorized consumption measurement, early leak detection, and automatic response capabilities are key elements for:

• Reduction in drinking water consumption

• Continuous monitoring of supplies

• Documentary justification of water savings

• Implementation of preventive maintenance strategies

• Improved operational performance of the building

Active monitoring and preventive management

The DCP1 allows:

• Sectorize consumption (housing, common areas, irrigation, technical processes)

• Detect consumption deviations in real time

• Automate shut-offs in response to abnormal flow rates

• Maintain historical data for technical audits

• Integrate into energy management platforms or BMS

This makes the device a strategic element for projects that seek not only to be certified, but also to maintain long-term water performance indicators.

Value for developers, engineering firms and installers

For engineering firms, construction companies, and developers, incorporating active control systems like the DCP1 offers:

• Improvement of sustainable building design

• Reduction of the risk of damage from leaks

• Technical argument in sustainability reports

• Greater appeal in real estate promotions with an ESG focus