Viewed products





Confianza Online


domoticalia.es/es/ Reviews with ekomi.es

Aeotec MultiSensor 7 - 6-in-1 Z-Wave Multifunction Detector 700 Series

AEOEZWA024-C

New

The Aeotec MultiSensor 7 is a multifunctional sensor for temperature, humidity, movement, UV and vibration.

More details

In Stock

71,16 €

Technical characteristics

Technology Z-Wave 700 Series

More info

Aeotec MultiSensor 7

Movement for security. Movement for presence. Movement for management. The Aeotec MultiSensor 7 motion sensor is perfect for more than just a smart security system. With a range of 10 meters and a field or angle of view of 120°, the MultiSensor 7 captures motion data that can be used for everything from security to heating management to energy savings. Knowing if a room is occupied or if a corridor is in use is a very powerful piece of information: MultiSensor 7 makes your home automation system more powerful and smarter.

Temperature sensor. Aeotec MultiSensor 7

From motorized shades and windows to fans and thermostats, there are many ways to use Z-Wave to keep a room temperature absolutely perfect. MultiSensor 7 provides the intelligence to do just that. Inside each sensor is an incremental temperature sensor capable of accurately measuring between -10~50°C (14 to 122°F) and reporting temperature changes to a smart home gateway.

Light sensor. Aeotec MultiSensor 7

Automated lighting is only as smart as the system that powers it. With the real-time digital light sensor MultiSensor 7, which measures the level of light in a room, your home control system can intelligently maintain your environment. From opening and closing shades to setting lights to the perfect level, day or night, MultiSensor 7 is the intelligence behind smart lighting.

Humidity sensor. Aeotec MultiSensor 7

Spaces like bathrooms and kitchens can be too humid, while some environments are often not humid enough. MultiSensor 6 offers incremental monitoring of humidity from 0% to 100%, enabling intelligent automation of fans, motorized windows, dehumidifiers, and humidifiers. MultiSensor 7 monitors your home on such an infinitesimal level that your home management system can make your environment truly seamless.

Vibration sensor. Aeotec MultiSensor 7

It measures the environment in which it finds itself and it also measures itself. MultiSensor 7 contains a seismic sensor capable of detecting and reporting event-based vibrations. Those slight changes can be used to protect the MultiSensor 7: you know if an intruder is tampering with it or if the sensor has been accidentally moved from its mounting location. It is also capable of recording subtle seismic activity within your home.

UV sensor. Aeotec MultiSensor 7

Managing an environment perfectly means understanding it perfectly. The MultiSensor 6 accurately measures ultraviolet light, the kind of light that causes everything from whitening furniture to damaging eyes. Measured in line with the World Health Organization UV Index, MultiSensor 7 measures the UV level of a room to be able to manage an environment through curtains, blinds and lighting, and to be able to make health and property recommendations. .

Perfect power. Aeotec MultiSensor 7

The perfect battery life is perfect for every installation. For all those times, the MultiSensor 7 can run on mains power. Simply plug it into your home electricity using the supplied USB cable and MultiSensor 7 can work in advanced mode, providing real-time temperature, humidity and light readings.

Characteristics:

MultiSensor Z-Wave with 6 integrated sensors (motion, temperature, light, humidity, vibration and UV).
Built with the Z-Wave 700 series - longer range, more efficient and better performance compared to the previous generation series
Wireless technology: Z-Wave Plus V2
SmartStart-enabled
S2 Security
Works with USB cable or batteries (up to 2 years of battery life)
Data transmission to the control center in real time and sensor technology optimized compared to its predecessor Aeotec MultiSensor 6

Extended Z-Wave info

Name: MultiSensor 7
Manufacturer:Aeotec
Identifier:ZWA024-C
Z-Wave Certification Number:ZC12-20120147
Hardware Plattform:ZGM130
FLiRS:YES
Role Type:Always On Slave
Short Description:Z-Wave MultiSensor 7
Description:Aeotec MultiSensor 7 is a sensor with ambient light/UV, temperature, humidity, vibration and motion.

Manual download HERE.

Group
Max Nodes
Description
1
5
Device Reset Locally: When factory reset. Notification Report: See Notification Chapter for more information. Sensor Binary Report: See Param5 for more information. Sensor Multilevel Report: When sensors above over limit or below under limit. Battery Report: See Param101. Indicator Report: Issued when the indicator light changed
2
5
Basic Set Command will be sent to the associated device when motion trigger or untrigger. The basic set value is determined by Param11, Param12. See Param13 for more information.
3
5
Basic Set: When the temperature change value is over or under the threshold set by Param16. Scale is determined by Param64.
4
5
Basic Set: When the temperature change value is under or over the threshold set by Param17. Scale is determined by Param64.
5
5
Basic Set: When the current humidity is over or under the threshold set by Param14
6
5
Basic Set: When the current humidity is under or over the threshold set by Param15
7
5
Basic Set: When the current light/lux is over or under the threshold set by Param18
8
5
Basic Set: When the current light/lux is under or over the threshold set by Param19.
9
5
Basic Set: When the current UV is over or under the threshold set by Param20
10
5
Basic Set: When the current UV is under or over the threshold set by Param21
11
5
Sensor Multilevel Report: When sensors above over limit or below under limit.
Number
Size (Bytes)
Default Value
Name
Description
1
1
1
Beaming Enable/Disable
Used to enable/disable beaming. If set to 1, FLiR commands will be supported. But the device must be re-included into the network to activate it. 0 - disable 1 - enable
10
1
0
Power Status
This value is Readonly. Used to report the power status (USB or Battery powered) 0 - When battery powered, the device will act as RSS. 1 - When USB cable insert, the device will act as LSS. The device must be re-included in the network to change the role type.
101
1
241
Automatic Report Checklist 1
Checklist 1 for automatic timed report. When the corresponding item is selected, it will be checked when timeout setting by Param111. 1 - Battery 16 - UV 32 - Temperature 64 - Humidity 128 - Lux
102
1
0
Automatic Report Checklist 2
Checklist 2 for automatic timed report. When the corresponding item is selected, it will be checked when timeout setting by Param112. 1 - Battery 16 - 32 - Temperature 64 - Humidity 128 - Lux
103
1
0
Automatic Report Checklist 3
Checklist 3 for automatic timed report. When the corresponding item is selected, it will be checked when timeout setting by Param113. 1 - Battery 16 - UV 32 - Temperature 64 - Humidity 128 - Lux
11
1
0
Motion Group Control(Group2)
Set control of other devices on group2 based on motion trigger. 0 - Send BASIC_SET (0xFF) when motion is triggered to associated device Send BASIC_SET (0x00) when motion is untriggered to associated device 1 - Send BASIC_SET (0x00) when motion is triggered Send BASIC_SET (0xFF) when motion is untriggered 2 - Send BASIC_SET (0xFF) when motion is triggered, Nothing when motion untriggered. 3 - Send BASIC_SET (0x00) when motion is triggered, Nothing when motion untriggered. 4 - Send BASIC_SET (0x00) when motion is untriggered, Nothing when motion triggered. 5 - Send BASIC_SET (0xFF) when motion is untriggered, Nothing when motion triggered. 6 - Send BASIC_SET (value is configured by parameter 12) when motion is triggered to associated devices. Send BASIC_SET (value is configured by parameter 12) when motion is untriggered.
111
2
3600
Automatic Checklist 1 Interval Time
Interval time set in seconds to check the checklist1’s items. Multilevel Sensor Report will be sent when timeout.
112
2
3600
Automatic Checklist 2 Interval Time
Interval time set in seconds to check the checklist2’s items. Multilevel Sensor Report will be sent when timeout.
113
2
3600
Automatic Checklist 3 Interval Time
Interval time set in seconds to check the checklist3’s items. Multilevel Sensor Report will be sent when timeout.
12
2
65280
Motion Group Value Setting
Set Basic Set value for Group2. The MSB will act as the basic set value when motion trigger. The LSB will act as the basic set value when motion untrigger. E.g. value=0x0A00, then BASIC_SET(0x0A) will be sent when motion trigger, BASIC_SET(0x00) will be sent when motion untrigger.
13
2
30000
Motion Group Control Requirement
Set threshold of Light/Lux when devices associated in group2 should be triggered by motion. Associated device only receive BASIC_SET command when light
14
1
60
Over Humidity Group Threshold (Group5)
Set threshold of humidity. If measured humidity >= (this value), send BASIC_SET (0xFF) to associated devices through group5. If measured humidity < (this value) send BASIC_SET (0x00) to associated devices through group5.
15
1
40
Under Humidity Group Threshold (Group6)
Set threshold of humidity. If measure humidity (this value) send BASIC_SET (0x00) to associated devices through group6.
16
2
239
Over Heat Group Threshold (Group3)
Set threshold of temperature. Designed to control Air Conditioners or temperature controllers ON or OFF. If measured temperature >= (this value, Scale is determined by Param64) send BASIC_SET (0xFF) to associated devices. If measured temperature<(this value) send BASIC_SET (0x00) to associated devices. E.g. Value 239 means 23.9 C. Value 750 means 75.0 F.
17
2
155
Under Heat Group Threshold (Group4)
Set threshold of temperature. Designed to control Air Conditioners or temperature controllers ON or OFF. If measured temperature (this value) send BASIC_SET (0x00) to associated devices. E.g. Value 155 means 15.5 C. Value 600 means 60.0 F.
18
2
2000
Over Light Group Threshold (Group7)
Set threshold of Light/Lux. If measured light/lux >= (this value) send BASIC_SET (0xFF) to associated devices. If measured light/lux < (this value) send BASIC_SET (0x00) to associated devices.
19
2
100
Under Light Group Threshold (Group8)
Set threshold of Light/Lux. If measured light/lux (this value) send BASIC_SET (0x00) to associated devices.
2
2
30
Motion Retrigger Time
Presence re-detection time set in second to allow motion sensor to reset timeout of motion sensor. In this time, the motion sensor can not be triggered again. If this value reach zero, the timeout configuration value set by Param3 will be reset. This setting value must always be less than timeout configuration. 0 - disable 1~3600 - timeout set in seconds
20
1
8
Over UV Group Threshold (Group9)
Set threshold of UV. If measured UV >= (this value) send BASIC_SET (0xFF) to associated devices. If measured UV < (this value) send BASIC_SET (0x00) to associated devices.
201
2
0
Temperature Offset Value
Can add or minus this setting value to calibrate temperature when checked. Scale is defined by Param64. e.g. Value 15 means 1.5C or 1.5F.
202
1
0
Humidity Offset Value
Can add or minus this setting value to calibrate humidity when checked. Unit: %.
203
2
0
Lux Offset Value
Can add or minus this setting value to calibrate Lux when checked.
204
1
0
UV Offset Value
Can add or minus this setting value to calibrate UV when checked.
21
1
1
Under UV Group Threshold (Group10)
Set threshold of UV. If measured UV (this value) send BASIC_SET (0x00 to associated devices.)
3
2
240
Motion Untrigger Time
Timeout configuration set in second for motion sensor to send no trigger status.
39
1
50
Low Battery Threshold
Configure low battery report threshold, sends low battery report via notification and battery report when battery level drops under setting. Unit %.
4
1
11
Motion Sensitivity
Set the sensitivity of motion sensor. 0 - disable 1- minimum sensitivity 11 - maximum sensitivity
40
1
0
Threshold Check Enable/Disable
Enable/Disable threshold reporting, check time can be adjusted by Param45. 0 - disable all threshold reports 1 - enable all threshold reports
41
1
10
Temperature Threshold
Threshold = (Value * 0.1) Scale is determined by Param64. 0 = disable.
42
1
5
Humidity Threshold
Humidity range = 1% to 50%, 0 = disable.
43
2
250
Lux Threshold
0 = disable
44
1
1
UV Threshold
0 = disable
45
2
240
Threshold Check Time
Set threshold check time in seconds if threshold is enable via Param40. 1~65535 - When USB powered 60~65535 - When Battery powered
46
1
1
Low Temperature Report
Eable/Disable alarm report for low temperature(
48
1
0
Sensor Limit Control
This value is bit mask. Used to enable/disable measurement reports for various sensors that is more than the upper limit value or less than the lower limit value. 1 - Temperature upper level 2 - Humidity upper level 4 - Lux upper level 8 - UV upper level 16 - Temperature lower level 32 - Humidity lower level 64 - Lux lower level 128 - UV lower level
49
2
280
Temperature Upper Limit
Set upper limit level for temperature set in scale of 0.1. Scale is determined by Param64. If (Current measurement) > (Upper Limit), then report sensor.
5
1
2
Motion Report Type
Set which command class will be sent when motion sensor is triggered or detriggered. 0 - Sends Notification Report 1 - Sends Sensor Binary Report 2 - Sends Notification and Sensor Binary Report
50
2
0
Temperature Lower Limit
Set lower limit level for temperature set in scale of 0.1. Scale is determined by Param64. If (Current Measurement) < (Lower limit), then report sensor.
51
1
20
Temperature Recover Limit
Temperature recover limit set in scale of 0.1. Scale is determined by Param64. If (Current measurement) = (lower limit + recover limit), then temperature report.
52
1
60
Humidity Upper Limit
Set humidity upper limit level.
53
1
40
Humidity Lower Limit
Set humidity lower limit level
54
1
5
Humidity Recover Limit
Set humidity recover limit level. Refer to Param 51.
55
2
1000
Lux Upper Limit
Set lux upper limit level.
56
2
100
Lux Lower Limit
Set lux lower limit level.
58
1
8
UV Upper Limit
Set UV upper limit level.
59
1
4
UV Lower Limit
Set UV lower limit level.
6
1
255
Vibration Sensor Enable/Disable
Used to enable/disable vibration sensor. 0 - disable vibration 1~254 - timeout set in minutes to reset vibration status 255 - timeout set in minutes to reset vibration status
60
1
1
UV Recover Limit
Set UV recover limit level. Refer to Param 51.
61
1
0
Out-of-limit State
This is read only and bit mask. Out of the limit state of sensors. Bit Mask: 0 - within limit 1 - out of limit Value: 1 - Temperature upper level 2 - Humidity upper level 4 - Lux upper level 8 - UV upper level 16 - Temperature lower level 32 - Humidity lower level 64 - Lux lower level 128 - UV lower level
64
1
0
Temperature Scale
Set the scale for temperature when reports. 0 - Celsius 1 - Fahrenheit
67
1
100
Lux Recover Limit
Set lux recover limit level. Refer to Param 51.
7
1
0
Vibration Intensity Reports
Used to enable/disable vibration intensity reports. If set to 1, vibration intensity will be sent to gateway when triggered. If set to 0, do not report.
81
1
1
LED Activity
Allow user to enable/disable LED activity of specific reports sent by sensor. Button press indicator is not affected by this. 0 - disable 1 - enable
82
1
3
Motion Sensor Report Indicator
If LED is enabled by Param81, allow user to change the report color of motion sensor. 0 - Disabled 1 - Red 2 - Blue 3 - Green 4 - Pink 5 - Cyan 6 - Purple 7 - Orange 8 - Yellow 9 - White
83
1
0
Temperature Sensor Report Indicator
If LED is enabled by Param81, allow user to change the report color of temperature sensor. 0 - Disabled 1 - Red 2 - Blue 3 - Green 4 - Pink 5 - Cyan 6 - Purple 7 - Orange 8 - Yellow 9 - White
84
1
0
Humidity Sensor Report Indicator
If LED is enabled by Param81, allow user to change the report color of humidity sensor. 0 - Disabled 1 - Red 2 - Blue 3 - Green 4 - Pink 5 - Cyan 6 - Purple 7 - Orange 8 - Yellow 9 - White
85
1
0
Lux Sensor Report Indicator
If LED is enabled by Param81, allow user to change the report color of Lux sensor. 0 - Disabled 1 - Red 2 - Blue 3 - Green 4 - Pink 5 - Cyan 6 - Purple 7 - Orange 8 - Yellow 9 - White
86
1
0
UV Sensor Report Indicator
If LED is enabled by Param81, allow user to change the report color of UV sensor. 0 - Disabled 1 - Red 2 - Blue 3 - Green 4 - Pink 5 - Cyan 6 - Purple 7 - Orange 8 - Yellow 9 - White
87
1
2
Vibration Sensor Report Indicator
If LED is enabled by Param81, allow user to change the report color of vibration sensor. 0 - Disabled 1 - Red 2 - Blue 3 - Green 4 - Pink 5 - Cyan 6 - Purple 7 - Orange 8 - Yellow 9 - White
88
1
0
Battery Report Indicator
If LED is enabled by Param81, allow user to change the report color of battery. 0 - Disabled 1 - Red 2 - Blue 3 - Green 4 - Pink 5 - Cyan 6 - Purple 7 - Orange 8 - Yellow 9 - White
89
1
8
Wakeup Report Indicator
If LED is enabled by Param81, allow user to change the report color of wakeup. 0 - Disabled 1 - Red 2 - Blue 3 - Green 4 - Pink 5 - Cyan 6 - Purple 7 - Orange 8 - Yellow 9 - White
9
1
15
Wakeup CC Timeout
Timeout set in seconds after Wakeup CC is send out before go to sleep. If wakeup no more information received, return to sleep mode immediately.
90
1
0
Communication Indicator
If LED is enabled by Param81, allow user to change indicator color when receiving communication from gateway or other devices. 0 - Disabled 1 - Red 2 - Blue 3 - Green 4 - Pink 5 - Cyan 6 - Purple 7 - Orange 8 - Yellow 9 - White
Application Status
COMMAND_CLASS_APPLICATION_STATUS
Association Group Information V3
COMMAND_CLASS_ASSOCIATION_GRP_INFO_V3
Association V2
COMMAND_CLASS_ASSOCIATION_V2
Battery
COMMAND_CLASS_BATTERY
Configuration V4
COMMAND_CLASS_CONFIGURATION_V4
Device Reset Locally
COMMAND_CLASS_DEVICE_RESET_LOCALLY
Firmware Update Meta-Data V5
COMMAND_CLASS_FIRMWARE_UPDATE_MD_V5
Indicator V3
COMMAND_CLASS_INDICATOR_V3
Manufacturer Specific V2
COMMAND_CLASS_MANUFACTURER_SPECIFIC_V2
Multi-Channel Association V3
COMMAND_CLASS_MULTI_CHANNEL_ASSOCIATION_V3
Notification V8
COMMAND_CLASS_NOTIFICATION_V8
Powerlevel
COMMAND_CLASS_POWERLEVEL
Security S0
COMMAND_CLASS_SECURITY
Security S2
COMMAND_CLASS_SECURITY_2
Sensor Binary V2
COMMAND_CLASS_SENSOR_BINARY_V2
Sensor Multilevel V11
COMMAND_CLASS_SENSOR_MULTILEVEL_V11
Supervision
COMMAND_CLASS_SUPERVISION
Transport Service V2
COMMAND_CLASS_TRANSPORT_SERVICE_V2
Version V3
COMMAND_CLASS_VERSION_V3
Wake Up V2
COMMAND_CLASS_WAKE_UP_V2
Z-Wave Plus Info V2
COMMAND_CLASS_ZWAVEPLUS_INFO_V2
Where to find S2 DSK on product
User guide section in the User manual.
Classic Inclusion
1. Turn your primary controller into inclusion mode.

2. Press once the Action Button on the product.
Classic Exclusion
1. Turn your primary controller into exclusion mode.

2. Press once the Action Button on the product.
Factory Reset Procedure
Press and hold the Action Button on product for 15-20s.
Wake-Up Procedure
Press and hold the Action button on product for 2-5s.
Dynamic Capabilities
The Sensor supports RSS and AOS role type:



1. When battery powered, the device will act as RSS.

2. When USB adpater powered, the device will act as AOS.



Note: The device must be re-included in the network if changing its role type.
Notice of Capability Rediscovery Needed
If the product is in sleep state for a long time and your gateway shows it is in offline state, you can rediscover it via pressing and holding the Action Button for 3 seconds, then the Sensor will send a wake_up notification report to your gateway and let your gateway that it is still online.
S2 Authenticated
S2_AUTHENTICATED
S2 Unauthenticated
S2_UNAUTHENTICATED
Battery Quantity
Enter the number of batteries of the designated type that the product uses.
Battery Type
Enter the type (e.g. AA, CR2032, AAA) of the battery/batteries that the product uses.
Color
If the product is only available in one color, pick the color from the list.
Firmware Updatable
Indicates whether the firmware can be updated and whether it is done by the consumer or a technician.

 

Reviews

Write a review

Aeotec MultiSensor 7 - 6-in-1 Z-Wave Multifunction Detector 700 Series

Aeotec MultiSensor 7 - 6-in-1 Z-Wave Multifunction Detector 700 Series

The Aeotec MultiSensor 7 is a multifunctional sensor for temperature, humidity, movement, UV and vibration.

9 other products in the same category:

Customers who bought this product also bought: