Heatit ZM Single Relay 16A

Características técnicas

Tecnología	Z-Wave Plus

Descripción

Heatit ZM Single Relay es un relé de alta potencia para instalaciones en la pared. El relé le permite controlar los dispositivos conectados, ya sea a través de su red Z-Wave o a través de un interruptor con cable. El módulo está equipado con un relé de 16A y tiene una funcionalidad de controlador de escena.

El Heatit ZM Single Relay tiene una función de medición de energía que le permite monitorear el consumo de energía de sus dispositivos conectados.

Heatit ZM Single Relay tiene SmartStart. Esta función permite al usuario incluir todos los dispositivos con SmartStart escaneando los códigos QR de los dispositivos. Al iniciarse, todos los dispositivos se incluirán automáticamente en la pasarela (requiere un controlador primario compatible con SmartStart).

Características

Relé de alta potencia para instalaciones empotradas
16A/3600W
SmartStart
Controlador de escenas
Actualización del firmware (OTA)
Medición de potencia
Soporta los modos de codificación S0, S2 Clase Autenticada, S2 Clase No Autenticada

Datos técnicos

Protocolo IOT: Z-Wave - 868,4 MHz (UE)
Tensión:230V 50Hz
Rango de temperatura ambiente en almacenamiento (°C):-30-70
Dimensiones (LxHxW):46x45x25mm
Efecto bruto total (W):3600
Certificaciones:Z-Wave Plus v2
Normativa internacional:EN 60669-1:2004/ A12:2010, EN 60669-1:2018, EN 60669-2-5:2016, EN 60669-2-1:2004 + A1:2009, ETSI EN 301 489-3 V2.1.1(2017-03), ETSI EN 300 220-2 V3.1.1 (2017-02), IEC 965-2-1, RoHS 2002/95/EG, WEE 2002/96/EC
Alcance de la señal de radiofrecuencia (número máximo de metros):40
Grado de protección (IP):IP 20
Carga (amperios):16
Humedad ambiente máxima (%RH):95% RF
Temperatura máxima de instalación (°C):40
Corriente máxima (amperios):16
Carga máxima (vatios - carga resistiva):3600
Temperatura máxima sin carga (°C):40
Temperatura máxima con carga (°C):40
Montaje / ubicación de montaje:Caja de pared ø60mm, profundidad 60mm
Consumo de energía propio (vatios):1
Altura del producto (mm):46
Longitud del producto (mm):25
Anchura del producto (mm):45
Modo de encriptación Z-Wave: S0, S2 Clase Autenticada, S2 Clase No Autenticada

Información Ampliada Z-Wave (Inglés)

Nombre: Heatit ZM Single Relay 16A

Fabricante:Heatit controls

Identificador:ZM Single Relay 16A

Número de Certificación Z-Wave:ZC12-21010159

Plataforma Hardware:ZGM130

FLiRS:NO

Tipo de Role:Always On Slave

Descripción Corta:Heatit ZM Single Relay is a high power relay for in-wall installations.

Descripción:Heatit ZM Single Relay is a high power relay for in-wall installations. The relay allows you to control connected devices either through your Z-Wave network or via a wired switch. The module is equipped with a 16A relay and has a scene controller functionality. The device can withstand a load of max 16A /3600W at 230VAC. The Heatit ZM Single Relay has a power metering feature that allows you to monitor the power consumption of your connected devices.

Descargue el manual desde aquí.

Grupo

Max Nodos

Descripción

1

5

Lifeline. (Normally used by the Z-Wave Controller) Sends:

2

5

Send Basic Set commands representing the status of the internal relay when changed from S1. (0x00, 0xFF) ON/OFF

3

5

When S1 pressed/held Press: 0x00, 0xFF Held: Multilevel Switch Start Level Change Command Level Increase Start / Level Increase Stop Level Decrease Start / Level Decrease Stop

4

5

- Basic Set (S2) (0x00, 0xFF)

5

When S2 pressed/held Press: 0x00 / 0xFF Held: Multilevel Switch Start Level Change Command Level Increase Start / Level Increase Stop Level Decrease Start / Level Decrease Stop Max nodes in group: 5

Número

Tamaño (Bytes)

Valor por Defecto

Nombre

Descripción

1

16

Load limit

Ensures that the device does not draw more current than rated. Immunity for power consumption peaks.

10

2

900

Meter report interval

Time interval between consecutive meter reports. Meter reports can also be sent as a result of polling.

11

2

75

Meter report delta value

2

20

Power shutdown actions

Decide how the device should react when the overload/overheating features has turned relay OFF

3

1

0

Switch Type

Decides what type of switch is connected.

4

1

0

S1/Button operation

5

1

0

Scene notifications

Decides if/what scene controller notifications the device sends to gateway.

6

1

2

Restore Power Level

Relay power level after power is restored from power-outage. When device is from factory/factory reset the first state of the device should be OFF

7

4

0

Automatic Turn off

Time to turn relay OFF after having been turned ON

8

4

0

Automatic Turn on

Time to turn relay ON after having been turned OFF

9

1

0

Inverted Output

Decides if the relay output should be inverted

Basic V2

COMMAND_CLASS_BASIC_V2

Association Group Information V3

COMMAND_CLASS_ASSOCIATION_GRP_INFO_V3

Association V2

COMMAND_CLASS_ASSOCIATION_V2

Basic V2

COMMAND_CLASS_BASIC_V2

Central Scene V3

COMMAND_CLASS_CENTRAL_SCENE_V3

Configuration V4

COMMAND_CLASS_CONFIGURATION_V4

Device Reset Locally

COMMAND_CLASS_DEVICE_RESET_LOCALLY

Firmware Update Meta-Data V5

COMMAND_CLASS_FIRMWARE_UPDATE_MD_V5

Indicator V3

COMMAND_CLASS_INDICATOR_V3

Manufacturer Specific V2

COMMAND_CLASS_MANUFACTURER_SPECIFIC_V2

Meter V3

COMMAND_CLASS_METER_V3

Multi-Channel Association V3

COMMAND_CLASS_MULTI_CHANNEL_ASSOCIATION_V3

Notification V8

COMMAND_CLASS_NOTIFICATION_V8

Powerlevel

COMMAND_CLASS_POWERLEVEL

Security S0

COMMAND_CLASS_SECURITY

Security S2

COMMAND_CLASS_SECURITY_2

Supervision

COMMAND_CLASS_SUPERVISION

Switch Binary V2

COMMAND_CLASS_SWITCH_BINARY_V2

Transport Service V2

COMMAND_CLASS_TRANSPORT_SERVICE_V2

Version V3

COMMAND_CLASS_VERSION_V3

Z-Wave Plus Info V2

COMMAND_CLASS_ZWAVEPLUS_INFO_V2

Where to find S2 DSK on product

The QR-Code is needed when including a device using S2 security or SmartStart. The DSK can be found in the QR-Code and is located;

1. On the product.

2. On the Quick Guide manual.

3. On the product box.

Classic Inclusion

The primary controller/gateway has a mode for adding devices. Please refer to your primary controller manual on how to set the primary controller in add mode. The device may only be added to the network if the primary controller is in add mode.

There are two ways to add the Heatit ZM Single Relay 16A to a Z-Wave network.

*Method 1: Standard (Manual)

Add mode is indicated on the device by a blinking green LED. This lasts until timeout occurs after 90 seconds, or until the module has been added to the network.

The LED will light up for 3 seconds if adding is successful.

Method 2: SmartStart (Automatic)

SmartStart enabled products may be added to a Z-Wave network by scanning the Z-Wave QR-Code on the product if your primary controller supports SmartStart inclusion. No further action is required and the SmartStart product will be added automatically after being powered on within range of the primary controller.

Classic Exclusion

The primary controller/gateway has a mode for removing devices. Please refer to your primary controller manual on how to set the primary controller in remove mode. The device may only be removed from the network if the primary controller is in remove mode.

Remove mode is indicated on the device by a blinking green LED. This lasts until timeout occurs after 90 seconds, or until the module has been removed from the network.

The LED will light up for 3 seconds if removing is successful.

Factory Reset Procedure

Press and hold the configuration button. After 3 seconds the LED will start to blink in green. After 20 seconds the LED will stop blinking and emit a constant light. You may now release the button.

NB! Please use this procedure only when the primary controller/ gateway is missing or otherwise inoperable.

Other Special Features

Paragraph 10.1 - Overload

Paragraph 10.2 - Overheating

S2 Authenticated

S2_AUTHENTICATED

S2 Unauthenticated

S2_UNAUTHENTICATED

Firmware Updatable

Indicates whether the firmware can be updated and whether it is done by the consumer or a technician.

Neutral Wire Required

For electric in-wall/wired switches, indicate whether a neutral wire is required for installation.

Switch Load Capacity Current

The amount of switch load energy the product is rated for in Amps