Shelly Qubino Wave 1PM Mini - Relé Z-Wave hasta 8A medición consumo

Características técnicas

Tecnología	Z-Wave Serie 800

Descripción

Interruptor inteligente Z-Wave®, 1 canal 8 A con medición de potencia

El interruptor inteligente Z-Wave más pequeño del mundo para un control inteligente. Automatice y controle a distancia sus luces o una amplia gama de pequeños electrodomésticos y mida su consumo de energía. Gracias a su diseño compacto, Wave 1PM Mini se adapta perfectamente incluso a las cajas de interruptores y/o electrodomésticos más pequeños.

Soporta hasta 8 A a 240 V CA
Medición de potencia
Consumo de energía extremadamente bajo < 0.3 W
Banda de frecuencia Z-Wave: 868,4 MHz (países CEPT)
Última tecnología: Z-Wave Serie 800
Configuración automática con SmartStart
Seguridad 2 autenticada para el máximo nivel de seguridad
Admite actualizaciones de firmware por aire
Instalación rápida y sencilla en la mayoría de cajas eléctricas e interruptores
Funciona con pasarelas certificadas Z-Wave y más de 4.000 dispositivos Z-Wave

*No se incluye una pasarela (smart hub). Se requiere una pasarela (smart hub) para la configuración del dispositivo.

¿POR QUÉ WAVE 1PM MINI?
Tamaño mini, precio mini
Diseñado pensando en la comodidad, este miniconmutador tiene todas las capacidades del Wave 1PM en un formato compacto que ahorra espacio. Con su tamaño reducido en un 35% del dispositivo Wave 1PM, el Wave 1PM Mini es perfecto para esos espacios reducidos en los que los módulos tradicionales simplemente no caben. A pesar de su reducido tamaño, los dispositivos Wave Mini no comprometen el rendimiento ni la funcionalidad.

Shelly Qubino funciona con Z-Wave

Mediante el uso de Z-Wave, los productos domésticos inteligentes pueden comunicarse perfectamente entre sí, independientemente de su marca o plataforma, ¡gracias a un hub inteligente centralizado! Los dispositivos Shelly Qubino funcionan con la última generación de chips Z-Wave (S800), una de las tecnologías estandarizadas para hogares inteligentes más populares del mundo.

Funciona con cualquier pasarela Z-Wave

Los dispositivos Wave Mini están diseñados para encajar detrás de cualquier interruptor o enchufe, o directamente dentro del electrodoméstico, transformándolo instantáneamente en uno inteligente. Una vez instalado, inclúyalo a su red Z-Wave (se requiere pasarela Z-Wave) y controle los electrodomésticos conectados desde cualquier lugar utilizando su smartphone o tableta. Los dispositivos Shelly Qubino funcionan con más de 4000 dispositivos y pasarelas certificados Z-Wave.

Funcionalidades de Wave 1PM Mini

Funciona con Z-Wave
Incluye Wave 1PM Mini a tu red Z-Wave y contrólalo a distancia. Es compatible con todas las pasarelas Z-Wave certificadas.
Asociaciones
Establezca una comunicación directa entre los dispositivos de su red local Z-Wave y configure acciones sin necesidad de una pasarela.
Monitorización de energía
Wave 1PM Mini proporciona una monitorización precisa del consumo de energía.
Amplia gama de soporte de voltaje
Utilice una amplia gama de niveles de tensión de salida.

Horarios inteligentes
Cree horarios personalizados alineados con su rutina diaria o sincronícelos con la salida/puesta del sol para gestionar su iluminación (requiere pasarela).
Escenas inteligentes
Configure escenas personalizadas combinando Wave 1PM Mini con cualquier otro dispositivo Z-Wave (se requiere pasarela).

¿POR QUÉ WAVE 1PM MINI?
¡El tamaño sí importa!
Los dispositivos Wave Mini abren un mundo de posibilidades, permitiéndole integrarlos a la perfección incluso en los espacios y cajas de interruptores más reducidos. Gracias a su reducido tamaño, los dispositivos Wave Mini encajan sin esfuerzo en todo tipo de cajas eléctricas, incluidas las cajas murales danesas. Además, pueden instalarse discretamente directamente dentro del aparato que desea controlar o supervisar.

Shelly Qubino Wave 1PM

Infinitas aplicaciones de uso

Controle su consumo de energía y ahorre dinero
Con la medición precisa de energía integrada de Wave 1PM Mini, puede realizar un seguimiento y controlar fácilmente el consumo de sus aparatos eléctricos más pequeños, como aparatos electrónicos personales, ventiladores, dispositivos de iluminación y aparatos de cocina. De este modo, le resultará más fácil a usted y a su bolsillo.

Crea un ambiente acogedor para una noche de cine con escenas inteligentes
Combina Wave 1PM Mini con otros dispositivos y crea escenas personalizadas en función de la hora, la iluminación o varios activadores. Con la escena "Noche de cine", puedes preparar tu casa para una acogedora noche de cine con tus amigos y familiares. Con un solo toque en tu smartphone puedes personalizar la iluminación, cerrar las cortinas y ajustar la temperatura para conseguir una sensación aún más acogedora.

Convierta en inteligente cualquier electrodoméstico de su hogar
Transforme cualquier aparato eléctrico de su hogar, ya sea antiguo o nuevo, en un dispositivo inteligente con Wave 1PM Mini. Su límite de 8 A es perfecto para electrodomésticos pequeños y medianos, como lámparas, aparatos de cocina y otros. Proporciona una supervisión precisa de la potencia, lo que le permite realizar un seguimiento del consumo de energía en tiempo real, y le ofrece control remoto sobre los electrodomésticos, sin importar dónde se encuentre. Colóquelo en el enchufe o colóquelo discretamente dentro de la carcasa del aparato, evitando la necesidad de cableado externo adicional.

Specifications

Power supply	110 - 240 V AC, 50/60 Hz
Power consumption	< 0,3W
Power measurement [W]	Yes
Max. switching voltage AC	240 V
Max. switching current AC	8 A
Max switching power AC:	2000 W
Max. switching voltage DC	N/A
Max. switching current DC	N/A
Overheating protection	Yes
Overload protection	Yes
Distance	Up to 40 m indoors (131 ft.) (depends on local condition)
Z-Wave® repeater:	Yes
CPU	Z-Wave® S800
Z-Wave® frequency bands:	868,4 MHz
Maximum radio frequency power transmitted in frequency band(s)	< 25 mW
Size (H x W x D)	29x35x16 ±0.5 mm / 1.11x1.35x0.63 ±0.02 in
Weight	18 ±1 g / 0.63 ±0.04 oz
Mounting	Wall box
Screw terminals max. torque	0.4 Nm / 3.54 lbin
Conductor cross section	0.5 to 1.5 mm² / 20 to 16 AWG
Conductor stripped length	5 to 6 mm / 0.20 to 0.24 in
Shell material	Plastic
Color	Red
Ambient temperature	-20°C to 40°C / -5°F to 105°F
Humidity	30% to 70% RH
Max. altitude	2000 m / 6562 ft.

Esquemas de Conexion

Manual de usuario

Información Ampliada Z-Wave (Inglés)

Nombre: Wave 1PM Mini

Fabricante:Shelly Qubino

Identificador:QMSW-0A1P8EU

Número de Certificación Z-Wave:ZC14-24020399

Plataforma Hardware:EFR32ZG23A

FLiRS:NO

Tipo de Role:Always On End Node

Descripción Corta:The Device is a small form factor smart switch with power measurement. It controls the on/off function for one electrical appliance with a load of up to 8 A AC, such as a bulb, ceiling fan, or IR heater. It is compatible with switches (default) and push-buttons.

Descripción:The Device is a small form factor smart switch with power measurement. It controls the on/off function for one electrical appliance with a load of up to 8 A AC, such as a bulb, ceiling fan, or IR heater. It is compatible with switches (default) and push-buttons.

Grupo

Max Nodos

Descripción

1

9

2

9

3

9

Número

Tamaño (Bytes)

Valor por Defecto

Nombre

Descripción

1

2

SW1 Switch type

0 push, 1 toggle state, 2 toggle change

120

1

0

Factory reset

17

1

0

Restore state of O1 after power failure

0 restore, 1 no restore

19

2

0

Turn O1 OFF Automatically with timer

0 - 32535, 0 disabled

20

2

0

Turn O1 ON Automatically with timer

0 - 32535, 0 disabled

201

4

2147483647

Serial Number 1

202

4

2147483647

Serial Number 2

203

4

2147483647

Serial Number 3

23

1

0

O1 NO/NC

0 NO, 1 NC

25

1

0

Set timer units to Seconds or Milliseconds for O1

0 seconds, 1 millisecods

36

1

50

O1 Power report on change - percenatge

1-100 percentage, 0 disabled

39

1

30

O1 min reporting time

1-120 seconds, 0 disabled

91

4

0

Alarm conf. - Water

0 no action 1 open relay 2 close relay

92

4

0

Alarm conf. - Smoke

0 no action 1 open relay 2 close relay

93

4

0

Alarm conf. - CO

0 no action 1 open relay 2 close relay

94

4

0

Alarm conf. - Heat

0 no action 1 open relay 2 close relay

Association Group Information (AGI) V3

COMMAND_CLASS_ASSOCIATION_GRP_INFO_V3

Association V2

COMMAND_CLASS_ASSOCIATION_V2

Basic V2

COMMAND_CLASS_BASIC_V2

Binary Switch V2

COMMAND_CLASS_SWITCH_BINARY_V2

Configuration V4

COMMAND_CLASS_CONFIGURATION_V4

Device Reset Locally

COMMAND_CLASS_DEVICE_RESET_LOCALLY

Firmware Update Meta Data V5

COMMAND_CLASS_FIRMWARE_UPDATE_MD_V5

Indicator V3

COMMAND_CLASS_INDICATOR_V3

Manufacturer Specific V2

COMMAND_CLASS_MANUFACTURER_SPECIFIC_V2

Meter V6

COMMAND_CLASS_METER_V6

Multi Channel Association V3

COMMAND_CLASS_MULTI_CHANNEL_ASSOCIATION_V3

Notification V8

COMMAND_CLASS_NOTIFICATION_V8

Powerlevel

COMMAND_CLASS_POWERLEVEL

Security 0

COMMAND_CLASS_SECURITY

Security 2

COMMAND_CLASS_SECURITY_2

Supervision

COMMAND_CLASS_SUPERVISION

Transport Service V2

COMMAND_CLASS_TRANSPORT_SERVICE_V2

Version V3

COMMAND_CLASS_VERSION_V3

Z-Wave Plus Info V2

COMMAND_CLASS_ZWAVEPLUS_INFO_V2

Where to find S2 DSK on product

When adding the Device to a Z-Wave network with a gateway supporting Security 2 (S2), the PIN Code of the Z-Wave Device Specific Key (DSK) is required. You can find it on the label on the side of the Device and a copy is inserted in the packaging, which must not be lost. Do not remove the Z-Wave DSK label from the Device. As a backup measure, use the label in the packaging.

The first five digits of the key are highlighted or underlined to help the user identify the PIN Code part of the DSK text. The DSK is additionally represented with a QR Code as shown on the image.

Classic Inclusion

7.1. Adding the Device to a Z-Wave® network (inclusion)

Note! All Device outputs (O, O1, O2, etc. - depending on the Device type) will turn the load 1s on/1s off /1s on/1s off if the Device is successfully added to/removed from a Z-Wave® network.

Note! In case of Security 2 (S2) adding (inclusion), a dialog will appear asking you to enter the corresponding PIN Code (5 underlined digits) that are written on the Z-Wave® DSK label on the side of the Device and on the Z-Wave® DSK label inserted in the packaging.

IMPORTANT: The PIN Code must not be lost.

7.1.1. SmartStart adding (inclusion)

SmartStart enabled products can be added into a Z-Wave® network by scanning the Z-Wave® QR Code present on the Device with a gateway providing SmartStart inclusion. No further action is required, and the SmartStart device will be added automatically within 10 minutes of being switched on in the network vicinity.

1. With the gateway application scan the QR code on the Device label and add the Security 2 (S2) Device Specific Key (DSK) to the provisioning list in the gateway.

2. Connect the Device to a power supply.

3. Check if the blue LED is blinking in Mode 1. If so, the Device is not added to a Z-Wave® network.

4. Adding will be initiated automatically within a few seconds after connecting the Device to a power supply, and the Device will be added to a Z-Wave® network automatically.

5. The blue LED will be blinking in Mode 2 during the adding process.

6. The green LED will be blinking in Mode 1 if the Device is successfully added to a Z-Wave® network.

7.1.2. Adding (inclusion) with the S button

1. Connect the Device to a power supply.

2. Check if the blue LED is blinking in Mode 1. If so, the Device is not added to a Z-Wave® network.

3. Enable add/remove mode on the gateway.

4. To enter the Setting mode, quickly press and hold the S button on the Device until the LED turns solid blue.

5. Quickly release and then press and hold (> 2s) the S button on the Device until the blue LED starts blinking in Mode 3. Releasing the S button will start the Learn mode.

6. The blue LED will be blinking in Mode 2 during the adding process.

7. The green LED will be blinking in Mode 1 if the Device is successfully added to a Z-Wave® network.

Note! In Setting mode, the Device has a timeout of 10s before entering again into Normal mode.

7.1.3. Adding (inclusion) with a switch/push-button

1. Connect the Device to a power supply.

2. Check if the blue LED is blinking in Mode 1. If so, the Device is not added to a Z-Wave® network.

3. Enable add/remove mode on the gateway.

4. Toggle the switch/push-button connected to any of the SW terminals (SW, SW1, SW2, etc.) 3 times within 3 seconds (this procedure puts the Device in Learn mode*). The Device must receive on/off signal 3 times, which means pressing the momentary switch 3 times, or toggling the switch on and off 3 times.

5. The blue LED will be blinking in Mode 2 during the adding process.

6. The green LED will be blinking in Mode 1 if the Device is successfully added to a Z-Wave® network.

*Learn mode - a state that allows the Device to receive network information from the gateway.

Classic Exclusion

7.2. Removing the Device from a Z-Wave® network (exclusion)

Note! The Device will be removed from your Z-Wave® network, but any custom configuration parameters will not be erased.

Note! All Device outputs (O, O1, O2, etc. - depending on the Device type) will turn the load 1s on/1s off /1s on/1s off if the Device is successfully added to/removed from a Z-Wave® network.

7.2.1. Removing (exclusion) with the S button

1. Connect the Device to a power supply.

2. Check if the green LED is blinking in Mode 1. If so, the Device is added to a Z-Wave® network.

3. Enable add/remove mode on the gateway.

4. To enter the Setting mode, quickly press and hold the S button on the Device until the LED turns solid blue.

5. Quickly release and then press and hold (> 2s) the S button on the Device until the blue LED starts blinking in Mode 3. Releasing the S button will start the Learn mode.

6. The blue LED will be blinking in Mode 2 during the removing process.

7. The blue LED will be blinking in Mode 1 if the Device is successfully removed from a Z-Wave® network.

Note! In Setting mode, the Device has a timeout of 10s before entering again into Normal mode.

7.2.2. Removing (exclusion) with a switch/push-button

1. Connect the Device to a power supply.

2. Check if the green LED is blinking in Mode 1. If so, the Device is added to a Z-Wave® network.

3. Enable add/remove mode on the gateway.

4. Toggle the switch/push-button connected to any of the SW terminals (SW, SW1, SW2,…) 3 times within 3 seconds (this procedure puts the Device in Learn mode). The Device must receive on/off signal 3 times, which means pressing the momentary switch 3 times, or toggling the switch on and off 3 times.

5. The blue LED will be blinking in Mode 2 during the removing process.

6. The blue LED will be blinking in Mode 1 if the Device is successfully removed from a Z-Wave® network.

Factory Reset Procedure

7.3. Factory reset

7.3.1. Factory reset general

After Factory reset, all custom parameters and stored values (kWh, associations, routings, etc.) will return to their default state. HOME ID and NODE ID assigned to the Device will be deleted. Use this reset procedure only when the gateway is missing or otherwise inoperable.

7.3.2. Factory reset with the S button

Note! Factory reset with the S button is possible anytime.

1. To enter the Setting mode, quickly press and hold the S button on the Device until the LED turns solid blue.

2. Press the S button multiple times until the LED turns solid red.

3. Press and hold (> 2s) S button on the Device until the red LED starts blinking in Mode 3. Releasing the S button will start the factory reset.

4. During factory reset, the LED will turn solid green for about 1s, then the blue and red LED will start blinking in Mode 3 for approx. 2s.

5. The blue LED will be blinking in Mode 1 if the Factory reset is successful.

7.3.3. Factory reset with a switch/push-button

Note! Factory reset with a switch/push-button is only possible within the first minute after the Device is connected to a power supply.

1. Connect the Device to a power supply.

2. Toggle the switch/push-button connected to any of the SW terminals (SW, SW1, SW2,…) 5 times within 3 seconds. The Device must receive on/off signal 5 times, which means pressing the push-button 5 times, or toggling the switch on and off 5 times.

3. During factory reset, the LED will turn solid green for about 1s, then the blue and red LED will start blinking in Mode 3 for approx. 2s.

4. The blue LED will be blinking in Mode 1 if the Factory reset is successful.

S2 Authenticated

S2_AUTHENTICATED

S2 Unauthenticated

S2_UNAUTHENTICATED

Color

If the product is only available in one color, pick the color from the list.

Electric Load Type

Select the electric load type(s) supported by the device.

Firmware Updatable

Indicates whether the firmware can be updated and whether it is done by the consumer or a technician.

Neutral Wire Required

For electric in-wall/wired switches, indicate whether a neutral wire is required for installation.