Productos más vistos





Confianza Online


Este producto se compra "Bajo Pedido"

FIBARO Walli Outlet (Tipo F)

FGWOF-011

Nuevo

El FIBARO Walli Outlet es un enchufe inteligente que le permite controlar y gestionar el dispositivo eléctrico conectado a él. Compatible con Z-Wave. Tipo F (Schuko), el formato de España, Alemania, Portugal...

Más detalles

En Stock - Envío inmediato

89,95 €

Características técnicas

Tecnología Z-Wave Plus

Descripción

Enchufe inteligente Z-Wave+ Fibaro Walli Outlet empotrable


FIBARO Walli Outlet es una toma de corriente inteligente que permite controlar y gestionar el dispositivo eléctrico conectado a ella. Está equipado con un anillo LED, que proporciona información sobre el consumo de energía. Puede controlar una carga máxima de 3680W (16A).

Diseño único y tecnología excepcional

La serie completa de conectores e interruptores inteligentes FIBARO basados en la tecnología Z-Wave proporcionará a su hogar una inteligencia versátil. El aspecto de la serie está inspirado en una perla - su sofisticación atemporal y su bella forma que completa cualquier interior.

Fibaro Walli

Anillo LED a juego con su hogar

Elige tu color favorito

Seleccione el color del anillo LED para adaptarlo a sus preferencias personales.

Botón de doble retroiluminación

Utilice dos colores de retroiluminación donde quiera - un color diferente en la parte inferior y otro en la parte superior para ver el estado exacto del dispositivo.

Una visión general del consumo de energía

Controle la cantidad de energía que consumen los equipos de su hogar.

Componentes fiables y detalles llamativos

En FIBARO, calidad y diseño únicos siempre van de la mano. La línea Walli ha sido diseñada para mejorar el confort y la seguridad de su familia durante muchos años.

Fibaro Walli

Pulsaciones al gusto

Configure el botón del conmutador Walli para aprovechar al máximo sus asombrosas capacidades.

Un solo clic para encender la luz, un doble clic para apagarla, un triple clic para encender la escena "Fun", una pulsación mantenida durante un 60% de intensidad de luz.

Compatible con productos de otros fabricantes

FIBARO Walli es compatible (con adaptadores) con placas frontales de otros fabricantes: GIRA - Sistema 55, Legrand - Céliane, Schneider - Odace. Si está conectado a enchufes e interruptores existentes, equípelos con una pieza integrada inteligente y disfrute de las características de una casa inteligente sin tener que reemplazar el panel frontal.

Fibaro Walli

Gestionar toda la casa con voz

Los interruptores inteligentes y tomas de corriente de Walli son totalmente compatibles con los famosos asistentes de voz de Google Assistant y Amazon Alexa. Gestión de voz fácil y cómoda de toda la casa.

Estar con su hogar dondequiera que esté

La aplicación móvil FIBARO Home Center le permite gestionar interruptores y tomas inteligentes con su smartphone, tablet o smartwatch. Mantenga todo bajo control como un jefe.

Consumo de energía controlado

Eche un vistazo a su hogar, analice el consumo de energía de sus electrodomésticos y optimice sus gastos como siempre ha querido.

Da un paso adelante hacia el futuro

La serie Walli de FIBARO incluye interruptores y tomas de corriente clásicas y no inteligentes para mantener constante la estética de su hogar. Elíjalos como usted desee y disfrute de un diseño y características únicas.

FUNCIONES:

Telegestión de todos los dispositivos eléctricos.
Control del dispositivo eléctrico mediante comandos de voz.
Ajuste el anillo de luz a las preferencias del usuario.
Acceso a los dispositivos desde la aplicación.
Notificaciones de averías de equipos eléctricos.
Control del consumo de energía.

ESPECIFICACIONES TÉCNICAS

Alimentación: 110-230V 50 / 60Hz
Corriente nominal de carga: 16A - cargas resistivas
Frecuencia de radio: 868.0-868.6 MHz
Alcance: hasta 40 m en interiores (dependiendo del terreno y de la estructura del edificio)
Potencia máxima de transmisión: + 6dBm
Temperatura de funcionamiento: 0-40 °C
Humedad ambiente: 10-90% RH sin condensación
Para instalación en cajas: Ø = 60mm, profundidad ≥ 50mm
Dimensiones (Al x An x Pr): 86 x 86 x 48mm


Toda la documentación e instrucciones de los productos Fibaro están disponibles en el sitio web manuals.fibaro.com

Información Ampliada Z-Wave (Inglés)

Nombre: Wall Outlet
Fabricante:FIBARO
Identificador:FGWOx-011
Número de Certificación Z-Wave:ZC10-19056516
Plataforma Hardware:ZM5101
FLiRS:NO
Tipo de Role:Always On Slave
Descripción Corta:FIBARO Walli Outlet is a smart electrical outlet designed to control electrical devices via Z-Wave network.
Descripción:FIBARO Walli Outlet is a smart electrical outlet designed to control electrical devices via Z-Wave network. It measures active power and energy consumed by the controlled load. You can install it with provided cover plate or other compatible. Main features of FIBARO Walli Outlet: - Can turn ON/OFF plugged device remotely. - Available in two versions for plug types: o Type E, o Type F. - Can be used with provided cover plate or one of the following: o GIRA – System 55 (Standard 55, E2, Event, Event Clear), o Legrand – Céliane, o Schneider – Odace. - Active power and energy consumption metering. - Displays current load using multicolour LED frame (with FIBARO cover plate). - Supports Z-Wave network Security Modes: S0 with AES-128 encryption and S2 Authenticated with PRNG-based encryption. - Works as Z-Wave signal repeater (all non-battery operated devices within the network will act as repeaters to increase reliability of the network). - May be used with all devices certified with the Z-Wave Plus certificate and should be compatible with such devices produced by other manufacturers.

Descargue el manual desde aquí.

Grupo
Max Nodos
Descripción
1
1
1st association group – “Lifeline” reports the device status and allows for assigning single device only (main controller by default).
2
5
2nd association group – “Power” devices in this group will be switched on or off depending on the current load of plugged device (uses Basic command class). Allows to control 5 regular or multichannel devices.
Número
Tamaño (Bytes)
Valor por Defecto
Nombre
Descripción
1
1
1
Remember device state
This parameter determines how the device will react in the event of power supply failure (e.g. power outage).
10
4
36800
LED frame – power limit
This parameter determines maximum active power. Exceeding it results in the LED frame flashing violet. Function is active only when parameter 11 is set to 8 or 9.
11
1
8
LED frame – colour when ON
This parameter defines the LED colour when the device is ON. When set to 8 or 9, LED frame colour will change depending on he measured power and parameter 10. Other colours are set permanently and do not depend on power consumption.
12
1
0
LED frame – colour when OFF
This parameter defines the LED colour when the device is OFF.
13
1
100
LED frame – brightness
This parameter allows to choose mode of 1st input (IN1). Change it depending on connected device.
2
4
0
Overload safety switch
This function allows to turn off the controlled device in case o f exceeding the defined power. Controlled device can be turned back on via button or sending a control frame.
30
4
0
Alarm configuration - 1st slot
This parameter determines to which alarm frames and how the device should react. The parameters consist of 4 bytes, three most significant bytes are set according to the official Z-Wave protocol specification.
31
4
0
Alarm configuration - 2nd slot
This parameter determines to which alarm frames and how the device should react. The parameters consist of 4 bytes, three most significant bytes are set according to the official Z-Wave protocol specification.
32
4
0
Alarm configuration - 3rd slot
This parameter determines to which alarm frames and how the device should react. The parameters consist of 4 bytes, three most significant bytes are set according to the official Z-Wave protocol specification.
33
4
0
Alarm configuration - 4th slot
This parameter determines to which alarm frames and how the device should react. The parameters consist of 4 bytes, three most significant bytes are set according to the official Z-Wave protocol specification.
34
4
0
Alarm configuration - 5th slot
This parameter determines to which alarm frames and how the device should react. The parameters consist of 4 bytes, three most significant bytes are set according to the official Z-Wave protocol specification.
35
2
600
Alarm configuration – duration
This parameter defines duration of alarm sequence. When time set in this parameter elapses, alarm is cancelled, LED frame and relay restore normal operation, but do not recover state from before the alarm.
45
1
3
Associations – 2nd group
This parameter determines which actions will result in sending control frames to devices associated in 2nd group.
46
4
500
Associations – UP threshold
This parameter determines upper power threshold for 2nd association group (paramter 45). Exceeding it will result in sending value set in parameter 47. Cannot be lower than DOWN threshold (parameter 48).
47
2
255
Associations – UP threshold frame value
This parameter defines value sent to devices in 2nd association group when power exceeds UP threshold set in parameter 46 (using Basic Command Class).
48
4
300
Associations – DOWN threshold
This parameter determines lower power threshold for 2nd association group (paramter 45). Exceeding it will result in sending value set in parameter 49.
49
2
0
Associations – DOWN threshold frame value
This parameter defines value sent to devices in 2nd association group when power drops below DOWN threshold set in parameter 48 (using Basic Command Class).
60
1
0
Power reports – include self-consumption
This parameter determines whether the power measurements should include power consumed by the device itself.
61
2
15
Power reports – on change
This parameter defines minimal change (from the last reported) in measured power that results in sending new report. For loads under 50W the parameter is irrelevant, report are sent every 5W change.
62
2
3600
Power reports – periodic
This parameter defines reporting interval for measured power. Periodic reports are independent from changes in value (parameter 61).
65
2
10
Energy reports – on change
This parameter defines minimal change (from the last reported) in measured energy that results in sending new report.
66
2
3600
Energy reports – periodic
This parameter defines reporting interval for measured energy. Periodic reports are independent from changes in value (parameter 66).
Basic
COMMAND_CLASS_BASIC
Application Status
COMMAND_CLASS_APPLICATION_STATUS
Association Group Information V2
COMMAND_CLASS_ASSOCIATION_GRP_INFO_V2
Association V2
COMMAND_CLASS_ASSOCIATION_V2
Basic
COMMAND_CLASS_BASIC
Configuration
COMMAND_CLASS_CONFIGURATION
CRC16 Encapsulation
COMMAND_CLASS_CRC_16_ENCAP
Device Reset Locally
COMMAND_CLASS_DEVICE_RESET_LOCALLY
Firmware Update Meta-Data V4
COMMAND_CLASS_FIRMWARE_UPDATE_MD_V4
Manufacturer Specific V2
COMMAND_CLASS_MANUFACTURER_SPECIFIC_V2
Meter V3
COMMAND_CLASS_METER_V3
Multi-Channel Association V3
COMMAND_CLASS_MULTI_CHANNEL_ASSOCIATION_V3
Notification V8
COMMAND_CLASS_NOTIFICATION_V8
Powerlevel
COMMAND_CLASS_POWERLEVEL
Protection V2
COMMAND_CLASS_PROTECTION_V2
Security S0
COMMAND_CLASS_SECURITY
Security S2
COMMAND_CLASS_SECURITY_2
Supervision
COMMAND_CLASS_SUPERVISION
Switch Binary
COMMAND_CLASS_SWITCH_BINARY
Transport Service V2
COMMAND_CLASS_TRANSPORT_SERVICE_V2
Version V2
COMMAND_CLASS_VERSION_V2
Z-Wave Plus Info V2
COMMAND_CLASS_ZWAVEPLUS_INFO_V2
Device Wake-Up
FIBARO Walli Outlet is powered using DC power supply unit so it is always awake.
Inclusion
To add the device to the Z-Wave network manually:

1. Power the device.

2. Set the main controller in (Security/non-Security Mode) add mode (see the controller’s manual).

3. Quickly, three times click one of the buttons.

4. If you are adding in Security S2 Authenticated, scan the DSK QR code or input the underlined part of the DSK (on the device label).

5. LED will start blinking yellow, wait for the adding process to end.

6. Adding result will be confirmed by the Z-Wave controller’s message and the LED frame:

- Green - successful (non-secure, S0, S2 non-authenticated),

- Magenta - successful (Security S2 Authenticated),

- Red – not successful.



To add the device to the Z-Wave network using SmartStart:

1. Set the main controller in Security S2 Authenticated add mode (see the controller’s manual).

2. Scan the DSK QR code or input the underlined part of the DSK (on the device label).

3. Power the device.

4. Wait for the adding process to start (up to few minutes), which is signaled with yellow LED blinking.

5. Adding result will be confirmed by the Z-Wave controller’s message and the LED frame:

- Green - successful (non-secure, S0, S2 non-authenticated),

- Magenta - successful (Security S2 Authenticated),

- Red – not successful.

Factory Reset
Reset procedure allows to restore the device back to its factory settings, which means all information about the Z-Wave controller and user configuration will be deleted. Resetting to factory defaults does not reset energy consumption memory.

1. Press and hold the button to enter the menu.

2. Release the button when the device glows yellow.

3. Quickly click the button to confirm.

4. Device will blink yellow to confirm.

5. After a few seconds the device will be restarted, which is signalled with the red LED colour.

Exclusion
To remove the device from the Z-Wave network:

1. Power the device.

2. Set the main controller into remove mode (see the controller’s manual).

3. Quickly, three times click the button.

4. LED will start blinking yellow, wait for the removing process to end.

5. Successful removing will be confirmed by the Z-Wave controller’s message and red LED colour.

S2 Authenticated
S2_AUTHENTICATED
S2 Unauthenticated
S2_UNAUTHENTICATED
Loads Controlled
The number of different loads controllable by the product if it supports more than one.
Supported Meter Type
Indicate which type of metering is supported by the device.
Supported Notification Types
Select the Notification Types that the product handles (controllers), or sends (slaves).
Switch Load Capacity Current
The amount of switch load energy the product is rated for in Amps
Color
If the product is only available in one color, pick the color from the list.
Electric Load Type
Select the electric load type(s) supported by the device.

 

Opiniones

Escribe tu opinión

FIBARO Walli Outlet (Tipo F)

FIBARO Walli Outlet (Tipo F)

El FIBARO Walli Outlet es un enchufe inteligente que le permite controlar y gestionar el dispositivo eléctrico conectado a él. Compatible con Z-Wave. Tipo F (Schuko), el formato de España, Alemania, Portugal...

15 otros productos de la misma categoría:

Los clientes que compraron este producto también han comprado...