Shelly Qubino Wave 1 mini

Características tecnicas

Tecnologia	Z-Wave Serie 800

Mais Informação

Z-Wave® Smart Relay, 1 canal 8A contacto seco

O interrutor inteligente Z-Wave mais pequeno do mundo para um controlo inteligente. Automatize e controle remotamente uma vasta gama de pequenos aparelhos eléctricos, tais como fechaduras, portas de garagem, sistemas de rega e luzes. Graças ao seu design compacto, o Wave 1 Mini encaixa perfeitamente mesmo nas caixas de distribuição e/ou aparelhos mais pequenos.

Soporta hasta 8A a 240 V CA (AC) y 5A a 30 V CC (DC)
Contacto seco (libres de potencial)
Consumo de energía extremadamente bajo < 0.3 W
Banda de frecuencia Z-Wave: 868,4 MHz (países CEPT)
Última tecnología: Serie Z-Wave 800 chip
Configuración automática con SmartStart
Seguridad 2 autenticada para el máximo nivel de seguridad
Admite actualizaciones de firmware por aire
Instalación rápida y sencilla en la mayoría de cajas eléctricas e interruptores
Funciona con pasarelas certificadas Z-Wave y más de 4.000 dispositivos Z-Wave

¿POR QUÉ WAVE 1 MINI?

Tamaño mini, precio mini

Diseñado pensando en la comodidad, este minirelé tiene todas las funciones de su hermano mayor Shelly Qubino Wave 1 en un formato compacto que ahorra espacio. Con su tamaño reducido en un 35% en comparación con su predecesor, Shelly Qubino Wave 1 Mini es perfecto para esos espacios reducidos en los que los módulos tradicionales simplemente no caben. A pesar de su reducido tamaño, los dispositivos Wave Mini no comprometen el rendimiento ni la funcionalidad.

INTRODUCCION A Z-WAVE

Shelly Qubino trabaja duro en Z-Wave

Mediante el uso de Z-Wave, los productos de domótica más profesionales pueden comunicarse perfectamente entre sí, independientemente de su marca o plataforma, gracias a un concentrador inteligente centralizado. Los dispositivos Shelly Qubino funcionan con la última generación de chips Z-Wave (Serie 800), una de las tecnologías estandarizadas para hogares inteligentes más populares del mundo.

INTRODUCCION A SHELLY QUBINO

Funciona con cualquier centro domótico Z-Wave

Los dispositivos Wave Mini están diseñados para encajar detrás de cualquier interruptor o enchufe, transformándolo al instante en uno inteligente. Una vez instalado, inclúyalo en su red Z-Wave (se requiere pasarela Z-Wave) y controle los aparatos conectados desde cualquier lugar utilizando su smartphone o tableta.
Los dispositivos Shelly Qubino funcionan con más de 4000 dispositivos y pasarelas certificados Z-Wave.

Funcionalidades de Wave 1 Mini

Funciona con Z-Wave

Incluye Wave 1 Mini en tu red Z-Wave y contrólalo a distancia. Es compatible con todas las pasarelas Z-Wave certificadas.

Contactos secos

Conecte diferentes cargas de alimentación (hasta 8 A) al dispositivo.

Asociaciones

Establezca una comunicación directa entre los dispositivos de su red local Z-Wave y configure acciones personalizadas sin necesidad de un concentrador.

Amplio rango de soporte de voltajes

Utiliza una amplia gama de niveles de tensión de salida. Soporta voltajes bajos.

Horarios inteligentes

Crea horarios personalizados alineados con tu rutina diaria o sincronízalos con la salida/puesta del sol para gestionar tu iluminación (se requiere pasarela).

Escenas inteligentes

Configure escenas personalizadas combinando Wave 1 Mini con cualquier otro dispositivo Z-Wave (requiere pasarela).

¿POR QUÉ WAVE 1 MINI?

El tamaño sí importa
Los dispositivos Wave Mini abren un mundo de posibilidades, permitiéndole integrarlos a la perfección incluso en los espacios y cajas de interruptores más reducidos. Gracias a su reducido tamaño, los dispositivos Wave Mini encajan sin esfuerzo en todo tipo de cajas eléctricas, incluidas las cajas murales danesas. Además, pueden instalarse discretamente directamente dentro del aparato que desea controlar o supervisar.

ALGUNOS CASOS DE USO

Sincronice sus luces con su rutina diaria

Con su tamaño compacto, Wave 1 Mini cabe detrás de cualquier interruptor de la luz o incluso dentro del rosetón de su lámpara. Sincronice su iluminación con las horas de puesta de sol para ajustarse a los cambios de la hora del día, garantizando que su hogar esté siempre agradablemente iluminado y sea acogedor, cuando la casa esté ocupada. Además, puede automatizar el apagado de las luces después de la hora de acostarse de su familia, evitando que las luces estén encendidas toda la noche y el consumo innecesario de energía.

Convierta cualquier electrodoméstico inteligente

Transforme cualquier electrodoméstico de su casa, viejo o nuevo, en un dispositivo inteligente con Wave 1 Mini. Su límite de 8 A es perfecto para aparatos pequeños y medianos, como lámparas, hervidores de agua eléctricos y otros. Colóquelo en el enchufe o colóquelo discretamente dentro de la carcasa del aparato, evitando la necesidad de cableado externo adicional.

Controle su puerta de garaje a distancia

El diseño compacto de Wave 1 Mini permite opciones de colocación flexibles, permitiéndole instalarlo directamente dentro de la carcasa del mando de la puerta del garaje o incluso cerca del motor. Su capacidad de gestión de potencia de 8 A garantiza un control fiable de la puerta del garaje, permitiéndole manejar cómodamente la puerta del garaje a distancia sin necesidad de voluminosos módulos externos.

Automatice su sistema de riego para una jardinería sin esfuerzo

El tamaño reducido de Wave 1 Mini permite instalarlo modestamente cerca del panel de control del sistema de riego o dentro de armarios estancos, garantizando su protección frente a los elementos. Su capacidad de 8 A es perfectamente adecuada para gestionar las válvulas de riego, ofreciendo un riego sin esfuerzo de su jardín con un toque en su smartphone, incluso cuando está de vacaciones. Para su tranquilidad, sólo tiene que programar el riego y los aspersores se encenderán y apagarán automáticamente. Sí, así de fácil.

Especificationes

Alientación	110 - 240 V AC, 50/60 Hz
Consumo en reposo	< 0,3 W
Max. voltaje de conmutación en AC	240 V
Max. corriente de conmutación en AC	8 A
Max potencia máxima de conmutación en AC	2000 W
Max. voltaje de conmutación en DC	30 V
Max. corriente de conmutación en DC	5 A
Protección de Overheating	Si
Distancia Z-Wave	Hasta 40 m en interiores (131 ft.)(depende de condiciones locales)
Repetidor Z-Wave®:	Si
CPU	Z-Wave® S800
Z-Wave® frequencia:	868,4 MHz
Maxima potencia de radio frequencia transmitida en su banda(s)	< 25 mW
Tamaño(A x A x F)	29x35x16 ±0.5 mm / 1.11x1.35x0.63 ±0.02 in
Peso	19 ±1 g / 0.65 ±0.04 oz
Montaje	Wall box
Par máximo de los tornillos de bornero	0.4 Nm / 3.54 lbin
Conductor seccion	0.5 a 1.5 mm / 20 to 16 AWG
Conductor longitud	5 a 6 mm / 0.20 a0.24 in
Carcasa material	Plastico
Color	Azul
Ambiente temperatura	-20°C a 40°C / -5°F a 105°F
Humedad	30% a 70% RH
Max. Altitud	2000 m / 6562 ft.

ASISTENCIA SOBRE PRODUCTOS

Incluso las mentes más inteligentes necesitan a veces un poco de orientación

WIRING DIAGRAMS USER MANUAL

Informação alargada da Z-Wave (Inglês)

Nome: Wave 1 Mini

Fabricante:Shelly Qubino

Identificador:QMSW-0A1X8EU

Número de Certificação Z-Wave :ZC14-24020400

Plataforma de Hardware :EFR32ZG23A

FLiRS:Não

Tipo de Role :Always On End Node

Descrição breve :Wave 1 Mini controls the on/off function for one electrical appliance (with a load of up to 8 A AC or 5 A DC), such as a bulb, ceiling fan, IR heater, electrical lock, garage doors, irrigation system. The output contact is potential-free (dry contact).

Descrição :Wave 1 Mini controls the on/off function for one electrical appliance (with a load of up to 8 A AC or 5 A DC), such as a bulb, ceiling fan, IR heater, electrical lock, garage doors, irrigation system. The output contact is potential-free (dry contact).

Grupo

Nodos máximos

Descrição

1

9

2

9

3

9

Número

Tamanho (Bytes)

Valor por defeito

Nome

Descrição

1

2

SW1 Switch type

0 push, 1 toggle state, 2 toggle change

120

1

0

Factory reset

17

1

0

Restore state of O1 after power failure

0 restore, 1 no restore

19

2

0

Turn O1 OFF Automatically with timer

0 - 32535, 0 disabled

20

2

0

Turn O1 ON Automatically with timer

0 - 32535, 0 disabled

201

4

2147483647

Serial Number 1

202

4

2147483647

Serial Number 2

203

4

2147483647

Serial Number 3

23

1

0

O1 NO/NC

0 NO, 1 NC

25

1

0

Set timer units to Seconds or Milliseconds for O1

0 seconds, 1 millisecods

91

4

0

Alarm conf. - Water

0 no action 1 open relay 2 close relay

92

4

0

Alarm conf. - Smoke

0 no action 1 open relay 2 close relay

93

4

0

Alarm conf. - CO

0 no action 1 open relay 2 close relay

94

4

0

Alarm conf. - Heat

0 no action 1 open relay 2 close relay

Association Group Information (AGI) V3

COMMAND_CLASS_ASSOCIATION_GRP_INFO_V3

Association V2

COMMAND_CLASS_ASSOCIATION_V2

Basic V2

COMMAND_CLASS_BASIC_V2

Binary Switch V2

COMMAND_CLASS_SWITCH_BINARY_V2

Configuration V4

COMMAND_CLASS_CONFIGURATION_V4

Device Reset Locally

COMMAND_CLASS_DEVICE_RESET_LOCALLY

Firmware Update Meta Data V5

COMMAND_CLASS_FIRMWARE_UPDATE_MD_V5

Indicator V3

COMMAND_CLASS_INDICATOR_V3

Manufacturer Specific V2

COMMAND_CLASS_MANUFACTURER_SPECIFIC_V2

Multi Channel Association V3

COMMAND_CLASS_MULTI_CHANNEL_ASSOCIATION_V3

Notification V8

COMMAND_CLASS_NOTIFICATION_V8

Powerlevel

COMMAND_CLASS_POWERLEVEL

Security 0

COMMAND_CLASS_SECURITY

Security 2

COMMAND_CLASS_SECURITY_2

Supervision

COMMAND_CLASS_SUPERVISION

Transport Service V2

COMMAND_CLASS_TRANSPORT_SERVICE_V2

Version V3

COMMAND_CLASS_VERSION_V3

Z-Wave Plus Info V2

COMMAND_CLASS_ZWAVEPLUS_INFO_V2

Where to find S2 DSK on product

When adding the Device to a Z-Wave network with a gateway supporting Security 2 (S2), the PIN Code of the Z-Wave Device Specific Key (DSK) is required. You can find it on the label on the side of the Device and a copy is inserted in the packaging, which must not be lost. Do not remove the Z-Wave DSK label from the Device. As a backup measure, use the label in the packaging.

The first five digits of the key are highlighted or underlined to help the user identify the PIN Code part of the DSK text. The DSK is additionally represented with a QR Code as shown on the image.

Classic Inclusion

7.1. Adding the Device to a Z-Wave® network (inclusion)

Note! All Device outputs (O, O1, O2, etc. - depending on the Device type) will turn the load 1s on/1s off /1s on/1s off if the Device is successfully added to/removed from a Z-Wave® network.

Note! In case of Security 2 (S2) adding (inclusion), a dialog will appear asking you to enter the corresponding PIN Code (5 underlined digits) that are written on the Z-Wave® DSK label on the side of the Device and on the Z-Wave® DSK label inserted in the packaging.

IMPORTANT: The PIN Code must not be lost.

7.1.1. SmartStart adding (inclusion)

SmartStart enabled products can be added into a Z-Wave® network by scanning the Z-Wave® QR Code present on the Device with a gateway providing SmartStart inclusion. No further action is required, and the SmartStart device will be added automatically within 10 minutes of being switched on in the network vicinity.

1. With the gateway application scan the QR code on the Device label and add the Security 2 (S2) Device Specific Key (DSK) to the provisioning list in the gateway.

2. Connect the Device to a power supply.

3. Check if the blue LED is blinking in Mode 1. If so, the Device is not added to a Z-Wave® network.

4. Adding will be initiated automatically within a few seconds after connecting the Device to a power supply, and the Device will be added to a Z-Wave® network automatically.

5. The blue LED will be blinking in Mode 2 during the adding process.

6. The green LED will be blinking in Mode 1 if the Device is successfully added to a Z-Wave® network.

7.1.2. Adding (inclusion) with the S button

1. Connect the Device to a power supply.

2. Check if the blue LED is blinking in Mode 1. If so, the Device is not added to a Z-Wave® network.

3. Enable add/remove mode on the gateway.

4. To enter the Setting mode, quickly press and hold the S button on the Device until the LED turns solid blue.

5. Quickly release and then press and hold (> 2s) the S button on the Device until the blue LED starts blinking in Mode 3. Releasing the S button will start the Learn mode.

6. The blue LED will be blinking in Mode 2 during the adding process.

7. The green LED will be blinking in Mode 1 if the Device is successfully added to a Z-Wave® network.

Note! In Setting mode, the Device has a timeout of 10s before entering again into Normal mode.

7.1.3. Adding (inclusion) with a switch/push-button

1. Connect the Device to a power supply.

2. Check if the blue LED is blinking in Mode 1. If so, the Device is not added to a Z-Wave® network.

3. Enable add/remove mode on the gateway.

4. Toggle the switch/push-button connected to any of the SW terminals (SW, SW1, SW2, etc.) 3 times within 3 seconds (this procedure puts the Device in Learn mode*). The Device must receive on/off signal 3 times, which means pressing the momentary switch 3 times, or toggling the switch on and off 3 times.

5. The blue LED will be blinking in Mode 2 during the adding process.

6. The green LED will be blinking in Mode 1 if the Device is successfully added to a Z-Wave® network.

*Learn mode - a state that allows the Device to receive network information from the gateway.

Classic Exclusion

7.2. Removing the Device from a Z-Wave® network (exclusion)

Note! The Device will be removed from your Z-Wave® network, but any custom configuration parameters will not be erased.

Note! All Device outputs (O, O1, O2, etc. - depending on the Device type) will turn the load 1s on/1s off /1s on/1s off if the Device is successfully added to/removed from a Z-Wave® network.

7.2.1. Removing (exclusion) with the S button

1. Connect the Device to a power supply.

2. Check if the green LED is blinking in Mode 1. If so, the Device is added to a Z-Wave® network.

3. Enable add/remove mode on the gateway.

4. To enter the Setting mode, quickly press and hold the S button on the Device until the LED turns solid blue.

5. Quickly release and then press and hold (> 2s) the S button on the Device until the blue LED starts blinking in Mode 3. Releasing the S button will start the Learn mode.

6. The blue LED will be blinking in Mode 2 during the removing process.

7. The blue LED will be blinking in Mode 1 if the Device is successfully removed from a Z-Wave® network.

Note! In Setting mode, the Device has a timeout of 10s before entering again into Normal mode.

7.2.2. Removing (exclusion) with a switch/push-button

1. Connect the Device to a power supply.

2. Check if the green LED is blinking in Mode 1. If so, the Device is added to a Z-Wave® network.

3. Enable add/remove mode on the gateway.

4. Toggle the switch/push-button connected to any of the SW terminals (SW, SW1, SW2,…) 3 times within 3 seconds (this procedure puts the Device in Learn mode). The Device must receive on/off signal 3 times, which means pressing the momentary switch 3 times, or toggling the switch on and off 3 times.

5. The blue LED will be blinking in Mode 2 during the removing process.

6. The blue LED will be blinking in Mode 1 if the Device is successfully removed from a Z-Wave® network.

Factory Reset Procedure

7.3. Factory reset

7.3.1. Factory reset general

After Factory reset, all custom parameters and stored values (kWh, associations, routings, etc.) will return to their default state. HOME ID and NODE ID assigned to the Device will be deleted. Use this reset procedure only when the gateway is missing or otherwise inoperable.

7.3.2. Factory reset with the S button

Note! Factory reset with the S button is possible anytime.

1. To enter the Setting mode, quickly press and hold the S button on the Device until the LED turns solid blue.

2. Press the S button multiple times until the LED turns solid red.

3. Press and hold (> 2s) S button on the Device until the red LED starts blinking in Mode 3. Releasing the S button will start the factory reset.

4. During factory reset, the LED will turn solid green for about 1s, then the blue and red LED will start blinking in Mode 3 for approx. 2s.

5. The blue LED will be blinking in Mode 1 if the Factory reset is successful.

7.3.3. Factory reset with a switch/push-button

Note! Factory reset with a switch/push-button is only possible within the first minute after the Device is connected to a power supply.

1. Connect the Device to a power supply.

2. Toggle the switch/push-button connected to any of the SW terminals (SW, SW1, SW2,…) 5 times within 3 seconds. The Device must receive on/off signal 5 times, which means pressing the push-button 5 times, or toggling the switch on and off 5 times.

3. During factory reset, the LED will turn solid green for about 1s, then the blue and red LED will start blinking in Mode 3 for approx. 2s.

4. The blue LED will be blinking in Mode 1 if the Factory reset is successful.

S2 Authenticated

S2_AUTHENTICATED

S2 Unauthenticated

S2_UNAUTHENTICATED

Color

If the product is only available in one color, pick the color from the list.

Electric Load Type

Select the electric load type(s) supported by the device.

Firmware Updatable

Indicates whether the firmware can be updated and whether it is done by the consumer or a technician.

Neutral Wire Required

For electric in-wall/wired switches, indicate whether a neutral wire is required for installation.