Produtos visualizados





Confianza Online


domoticalia.es/es/ Reviews with ekomi.es

Aeotec WallMote Quad - Controle remoto com 4 botões

AEOEZW130

Novo

Controle de iluminação. Controle de dispositivos. Controle de cenas. Controle Z-Wave. Existem milhares de dispositivos Z-Wave que você pode ter em sua casa ou escritório, mas controlá-los às vezes não é natural. Normalmente, você precisa tirar o celular usando um tablet ou um computador. O WallMote traz controle natural e intrínseco, melhorando a casa conectada.

Mais detalhes

Em estoque

79,99 €

Características tecnicas

Tecnologia Z-Wave Plus

Mais Informação

O Aeotec WallMote é um controlo remoto ou controlo remoto, interruptor de parede e controlador all-in-one Z-Wave. Este dispositivo pode gerenciar sua própria rede Z-Wave (se for incluído como controlador primário) e pode controlar outros dispositivos, como tomadas de parede, persianas, dimmers, luzes, fechaduras eletrônicas e muito mais. Obviamente, ele também pode ser integrado a uma rede Z-Wave como um controlador secundário, onde já existe um controlador de automação residencial. Cada modo será ativado no padrão de fábrica após a primeira ação. Como controlador secundário, envia comandos para o controlador Z-Wave e também controla os dispositivos e cenas definidos.

O WallMote pode ativar as funções correspondentes com um único clique. Além disso, domina o chamado "deslizamento". Este sistema de controle por toque permite que você deslize com apenas um dedo pela área relevante no WallMote para diminuir as luzes por intuição, por exemplo.

O interruptor de toque alimentado por bateria vem com um ímã que permite que você mantenha o dispositivo no respectivo suporte de parede. Desta forma, o WallMote se torna um interruptor de parede. Você também pode tirar o dispositivo e usá-lo como um controle remoto portátil.

Se quiser saber mais, pode verificar a análise que fizemos no nosso teste Aeotec Wallmote Quad aqui

Aeotec Wallmote Espanha

"Interruptor remoto com uma superfície de toque de 4 botões
"Z-Wave Plus
"Frequência UE: 868,42 MHz
"Feedback da vibração durante a operação
"Função de deslizamento
"O LED de cor integrado indica o status
"Conteúdo do pacote: interruptor de toque remoto, suporte de parede, materiais de montagem

Informação alargada da Z-Wave (Inglês)

Nome: WallMote Quad
Fabricante:Aeotec
Identificador:ZW130-C
Número de Certificação Z-Wave :ZC10-17035521
Plataforma de Hardware :ZM5101
FLiRS:Não
Tipo de Role :Portable Slave
Descrição breve :Aeotec WallMote Quad is an intelligent Z-Wave remote controller that is mounted on a wall
Descrição :Aeotec WallMote Quad is an intelligent Z-Wave remote controller that mounted on a wall. It has 4 touch buttons that you can easily control the Z-Wave devices in your home network via touching, long pressing or sliding the button areas. Its surface has a RGB LED to indicate the button actions also accompanied by touch beep and vibration. The WallMote Quad is also a security Z-Wave device and supports Over The Air (OTA) feature for the products firmware upgrade.

Descarregue o manual a partir de aqui.

Grupo
Nodos máximos
Descrição
1
1
Z-Wave Plus Lifeline. When touching the Button 1 to 4, the Central Scene Notificcation command will be sent to the associated node (1) in Association group 1.
2
5
When touching the Button 1, the Basic Set command will be sent to the associated nodes in Association group 2.
3
5
When touching the Button 1, the Multilevel Switch Set command will be sent to the associated nodes in Association group 3.
4
5
When touching the Button 2, the Basic Set command will be sent to the associated nodes in Association group 4.
5
5
When touching the Button 2, the Multilevel Switch Set command will be sent to the associated nodes in Association group 5.
6
5
When touching the Button 3, the Basic Set command will be sent to the associated nodes in Association group 6.
7
5
When touching the Button 3, the Multilevel Switch Set command will be sent to the associated nodes in Association group 7.
8
5
When touching the Button 4, the Basic Set command will be sent to the associated nodes in Association group 8.
9
5
When touching the Button 4, the Multilevel Switch Set command will be sent to the associated nodes in Association group 9.
Número
Tamanho (Bytes)
Valor por defeito
Nome
Descrição
1
1
1
Enable/disable the touch sound.
Enable/disable the touch sound.
2
1
0
Enable/disable the touch vibration.
Enable/disable the touch vibration.
255
4
0
Reset the WallMote Quad
Reset the WallMote Quad to factory default.
3
1
1
Enable/disable the function of button slide.
Enable/disable the function of button slide.
39
1
5
Set the low battery value.
Set the low battery value..
4
1
1
To configure which report will be sent when pressing the buttons.
To set which notification would be sent to the associated devices (Group 1) when pressing the buttons.
Basic
COMMAND_CLASS_BASIC
Switch Binary V2
COMMAND_CLASS_SWITCH_BINARY_V2
Switch Multilevel V4
COMMAND_CLASS_SWITCH_MULTILEVEL_V4
Association Group Info
COMMAND_CLASS_ASSOCIATION_GRP_INFO
Association V2
COMMAND_CLASS_ASSOCIATION_V2
Battery
COMMAND_CLASS_BATTERY
Central Scene V2
COMMAND_CLASS_CENTRAL_SCENE_V2
Configuration
COMMAND_CLASS_CONFIGURATION
Device Reset Locally
COMMAND_CLASS_DEVICE_RESET_LOCALLY
Firmware Update Meta-Data V2
COMMAND_CLASS_FIRMWARE_UPDATE_MD_V2
Manufacturer Specific V2
COMMAND_CLASS_MANUFACTURER_SPECIFIC_V2
Multi-Channel Association V3
COMMAND_CLASS_MULTI_CHANNEL_ASSOCIATION_V3
Multi-Channel V4
COMMAND_CLASS_MULTI_CHANNEL_V4
Notification V4
COMMAND_CLASS_NOTIFICATION_V4
Powerlevel
COMMAND_CLASS_POWERLEVEL
Security S0
COMMAND_CLASS_SECURITY
Version V2
COMMAND_CLASS_VERSION_V2
Wake Up V2
COMMAND_CLASS_WAKE_UP_V2
Z-Wave Plus Info V2
COMMAND_CLASS_ZWAVEPLUS_INFO_V2
Additional Special Features
Support ""Over the Air Firmware Updating"" and “Z-Wave Security”.

Factory Reset
Press and hold the Action button that you can find on the product's housing for 20 seconds and then release. This procedure should only be used when the primary controller is missing or inoperable.
Controller Inclusion
Turn the primary controller of Z-Wave network into inclusion mode, short press the product’s Action button that you can find on the product's housing.
Controller Exclusion
Turn the primary controller of Z-Wave network into exclusion mode, short press the product’s Action button that you can find on the product's housing.
Firmware Updatable
Indicates whether the firmware can be updated and whether it is done by the consumer or a technician.
Z-Wave Scene Type
Indicates which of the two types of Z-Wave scene command classes are supported. Scenes or Central Scene

 

Avaliações

Escrever uma avaliação

Aeotec WallMote Quad - Controle remoto com 4 botões

Aeotec WallMote Quad - Controle remoto com 4 botões

Controle de iluminação. Controle de dispositivos. Controle de cenas. Controle Z-Wave. Existem milhares de dispositivos Z-Wave que você pode ter em sua casa ou escritório, mas controlá-los às vezes não é natural. Normalmente, você precisa tirar o celular usando um tablet ou um computador. O WallMote traz controle natural e intrínseco, melhorando a casa conectada.

18 outros produtos na mesma categoria:

Clientes que compraram este produto também compraram: