Produtos visualizados





Confianza Online


domoticalia.es/es/ Reviews with ekomi.es

Aeotec TriSensor

AEOEZWA005

Novo

O TriSensor inclui os 3 sensores básicos para tornar sua casa inteligente: movimento, temperatura e brilho.

Mais detalhes

Em estoque

59,39 €

-10%

65,99 €

Características tecnicas

Tecnologia Z-Wave Plus

Mais Informação

Toda casa inteligente Z-Wave depende dos dados para uma automação verdadeiramente inteligente; automação que torna uma casa inteligente realmente inteligente, responsiva e segura. O TriSensor da Aeotec fornece à sua Smart Home os dados mais essenciais.

3 sensores diferentes são fabricados no acabamento incrivelmente pequeno do Aeotec TriSensor. Um sensor de movimento para controlar a ocupação de uma sala, um sensor de temperatura para gerenciar seu ambiente e um sensor de intensidade de luz para gerenciar a iluminação conectada.

Com apenas 1,77 polegadas de tamanho e pesando apenas 50 gramas, o Aeotec TriSensor é realmente pequeno. Isso significa que pode ser colocado em qualquer lugar da sua casa. O TriSensor oferece 4 possibilidades de instalação diferentes: na esquina, numa prateleira, numa viga ou no Aeotec Recessor.

Sensor de Movimento

O sensor detecta movimento até 7,5 metros de distância. Também pode ser ajustado e calibrado de acordo com suas necessidades, por exemplo. Para evitar um alarme de um animal de estimação.

Temperatura

O sensor de temperatura é preciso e detecta temperaturas na faixa de -10 ° C a 50 ° C (+/- 1 ° C). A temperatura pode ser usada em relação ao dispositivo de aquecimento. Além disso, o TriSensor Aeotec pode controlar um dispositivo diretamente associado, se a temperatura exceder um nível definido.

Light

Meça a intensidade da luz de 0 a 30000 Lux e automatize sua luz ambiente dependendo da luz do dia.

Orçamento:

TriSensor com sensor de movimento, temperatura e luz.
Movimento: Necessário a 7,5m
Temperatura: -10 ° C ~ 50 ° C / + - 1 ° C
Luz: 0 ~ 30000 Lux, + -3%
Bateria alimentada por bateria de lítio CR123A
Vida útil da bateria até 3 anos
Segurança Z-Wave S2
Z-Wave Plus
Escopo de entrega:

TriSensor com montagem na parede
Bateria CR123A
Manual Mulitlingual

Informação alargada da Z-Wave (Inglês)

Nome: TriSensor
Fabricante:Aeotec
Identificador:ZWA005-C
Número de Certificação Z-Wave :ZC10-18046087
Plataforma de Hardware :ZM5101
FLiRS:Não
Tipo de Role :Reporting Sleeping Slave
Descrição breve :Aeotec TriSensor has a motion detector, ambient temperature and ambient light sensor in one, based on Z-Wave Plus technology.
Descrição :TriSensor can be included and operated in any Z-Wave network with other Z-Wave certified devices from other manufacturers and/or other applications. All non-battery operated nodes within the network will act as repeaters regardless of vendor to increase reliability of the network. If PIR motion sensor is triggered, the TriSensor will send a Basic set to associated devices. The PIR motion sensor will then become inactive. If no PIR motion is triggered after the PIR interval time (configurable), the TriSensor will send Basic Set to the associated nodes.

Descarregue o manual a partir de aqui.

Grupo
Nodos máximos
Descrição
1
5
Group 1 is lifeline group; all nodes which associated in this group will receive the messages sent by device through lifeline. Command Class: COMMAND_CLASS_NOTIFICATION COMMAND_CLASS_SENSOR_BINARY COMMAND_CLASS_SENSOR_MULTILEVEL COMMAND_CLASS_BATTERY COMMAND_CLASS_DEVICE_RESET_LOCALLY Command : NOTIFICATION_REPORT SENSOR_BINARY_REPORT SENSOR_MULTILEVEL_REPORT BATTERY_REPORT DEVICE_RESET_LOCALLY_NOTIFICATION
2
5
Group 2 is controlling group, all nodes associated in this group will be controlled through BASIC_SET command by the device when device detects a movement event. Basic Set Value is decided by Configuration Parameter 6. Command Class: COMMAND_CLASS_BASIC (Home Security) Command : BASIC_SET
3
5
Group 3 is controlling group, all nodes associated in this group will be controlled through BASIC_SET command by the device when device detects an ambient temperature alarm (Decided by Configuration Parameter 7). Command Class: COMMAND_CLASS_BASIC (Temperature) Command : BASIC_SET
Número
Tamanho (Bytes)
Valor por defeito
Nome
Descrição
1
2
30
Motion Retrigger Time
This parameter is configured the delay time before PIR sensor can be triggered again to reset motion timeout counter. Value = 0 will disable PIR sensor from triggering until motion timeout has finished.
10
1
1
Led Indicate Disable
This parameter is configured the Led light on disable or enable. ‘1’ – Enable Led Blink when device detects a motion event. ‘0’ – Disable Led Blink. This configuration is not affect inclusion, exclusion and reset.
100
2
1024
Light Sensor Calibrated Coefficient
This configuration defines the calibrated scale for ambient light intensity. Because the method and position that the sensor mounted and the cover of sensor will bring measurement error, user can get more real light intensity by this parameter setting. User should run the steps as blows for calibrating 1) Set this parameter value to default (Assumes the sensor has been added in a Z-Wave Network). 2) Place a digital luxmeter close to sensor and keep the same direction, monitor the light intensity value (Vm) which report to controller and record it. The same time user should record the value (Vs) of luxmeter. 3) The scale calibration formula: k = Vm / Vs. 4) The value of k is then multiplied by 1024 and rounded to the nearest whole number. 5) Set the value getting in to this parameter, calibrate finished. For example, Vm = 300, Vs = 2600, then k = 2600 / 300 = 8.6667 k = 8.6667 * 1024 = 8874.7 ≈ 8875 The parameter should be set to 8875.
11
1
2
Led Color For Motion Event Report
‘0’ – Disable. ‘1’ – Red. ‘2’ – Green. ‘3’ – Blue. ‘4’ – Yellow. ‘5’ – Pink. ‘6’ – Cyan. ‘7’ – Purple. ‘8’ – Orange.
12
1
0
Led Color For Temperature Sensor Report
‘0’ – Disable. ‘1’ – Red. ‘2’ –Green. ‘3’ – Blue. ‘4’ – Yellow. ‘5’ – Pink. ‘6’ – Cyan. ‘7’ – Purple. ‘8’ – Orange.
13
1
0
Led Color For Light Sensor Report
‘0’ – Disable. ‘1’ – Red. ‘2’ –Green. ‘3’ – Blue. ‘4’ – Yellow. ‘5’ – Pink. ‘6’ – Cyan. ‘7’ – Purple. ‘8’ – Orange.
14
1
0
Led Color For Battery Report
‘0’ – Disable. ‘1’ – Red. ‘2’ –Green. ‘3’ – Blue. ‘4’ – Yellow. ‘5’ – Pink. ‘6’ – Cyan. ‘7’ – Purple. ‘8’ – Orange.
15
1
0
Led Color For Wakeup Notification Report
‘0’ – Disable. ‘1’ – Red. ‘2’ –Green. ‘3’ – Blue. ‘4’ – Yellow. ‘5’ – Pink. ‘6’ – Cyan. ‘7’ – Purple. ‘8’ – Orange.
2
2
240
Motion Clear Time
This parameter is configured the time to clear motion event after a motion event detected. Time to motion clear, the device will send a clear event report to controller and send BASIC_SET = 0x00 to nodes associated in group 2. Unit: Second.
20
1
0
Temperature Scale Setting
Configure temperature sensor scale type, Temperature to report in Celsius or Fahrenheit. 0 – Celsius (C). 1 – Fahrenheit (F).
21
2
20
Temperature Threshold Value to Report
Change threshold value for change in temperature to induce an automatic report for temperature sensor. Scale is identical setting in Parameter No.20. Setting of value 20 can be a change of -2.0 or +2.0 (C or F depending on Parameter No.20) to induce automatic report or setting a value of 2 will be a change of 0.2(C or F).
22
2
100
Light intensity Threshold Value to Report
Change threshold value for change in light sensor to induce an automatic report for temperature sensor. Scale: Lux.
23
2
3600
Temperature Sensor Report Interval
This parameter is configured the time interval for temperature sensor report. This value is larger, the battery life is longer. And the temperature value changed is not obvious. Unit: Second.
24
2
3600
Light Sensor Report Interval
This parameter is configured the time interval for light sensor report. This value is larger, the battery life is longer. And the light intensity changed is not obvious. Unit: Second.
3
1
11
Motion Sensitivity
This parameter is configured the sensitivity that motion detect. 0 – PIR sensor disabled. 1 – Lowest sensitivity. 11 – Highest sensitivity.
30
2
0
Temperature Offset Value
The current measuring temperature value can be add and minus a value by this setting. The scale can be decided by Parameter Number 20. Temperature Offset Value = [Value] * 0.1(Celsius / Fahrenheit)
31
2
0
Light Intensity Offset Value
The current measuring light intensity value can be add and minus a value by this setting.
4
1
0
Binary Sensor Report Enable
‘0’ –Disable sensor binary report when motion event is detected or cleared. ‘1’ –Enable sensor binary report when motion event is detected or cleared.
5
1
3
Disable BASIC_SET to Associated nodes
This parameter is configured the enabled or disabled send BASIC_SET command to nodes that associated in group 2 and group 3. 0 – Disabled All Group Basic Set Command 1 – Enabled Group 2 Basic Set Command, Group 3 Basic Set Command is disabled. 2 – Enabled Group 3 Basic Set Command, Group 2 Basic Set Command is disabled. 3 – Enabled Group 2 and Group 3 Basic Set Command.
6
1
0
Basic Set Value Settings for Group 2
‘0’ – Send BASIC_SET = 0xFF to devices associated in Group 2 when motion event is triggered, send BASIC_SET = 0x00 to devices associated in group 2 when motion event is cleared. ‘1’– Send BASIC_SET = 0x00 to devices associated in Group 2 when motion event is triggered, send BASIC_SET = 0xFF to devices associated in group 2 when motion event is cleared. ‘2’ – Send BASIC_SET = 0xFF to devices associated in Group 2 when motion event is triggered. ‘3’ – Send BASIC_SET = 0x00 to devices associated in Group 2 when motion event is triggered. ‘4’ – Send BASIC_SET = 0x00 to devices associated in Group 2 when motion event is cleared. ‘5’ – Send BASIC_SET = 0xFF to devices associated in Group 2 when motion event is cleared.
7
2
239
Temperature Alarm Value
This parameter is configured the threshold value that alarm level for temperature. When the current ambient temperature value is larger than this configuration value, device will send a BASIC_SET = 0xFF to nodes associated in group 3. If current temperature value is less than this value, device will send a BASIC_SET = 0x00 to nodes associated in group 3. Value = [Value] × 0.1(Celsius / Fahrenheit)
Basic
COMMAND_CLASS_BASIC
Association Group Info
COMMAND_CLASS_ASSOCIATION_GRP_INFO
Association V2
COMMAND_CLASS_ASSOCIATION_V2
Battery
COMMAND_CLASS_BATTERY
Configuration
COMMAND_CLASS_CONFIGURATION
Device Reset Locally
COMMAND_CLASS_DEVICE_RESET_LOCALLY
Firmware Update Meta-Data V4
COMMAND_CLASS_FIRMWARE_UPDATE_MD_V4
Manufacturer Specific V2
COMMAND_CLASS_MANUFACTURER_SPECIFIC_V2
Multi-Channel Association V3
COMMAND_CLASS_MULTI_CHANNEL_ASSOCIATION_V3
Notification V8
COMMAND_CLASS_NOTIFICATION_V8
Powerlevel
COMMAND_CLASS_POWERLEVEL
Security S0
COMMAND_CLASS_SECURITY
Security S2
COMMAND_CLASS_SECURITY_2
Sensor Binary V2
COMMAND_CLASS_SENSOR_BINARY_V2
Sensor Multilevel V7
COMMAND_CLASS_SENSOR_MULTILEVEL_V7
Supervision
COMMAND_CLASS_SUPERVISION
Transport Service V2
COMMAND_CLASS_TRANSPORT_SERVICE_V2
Version V2
COMMAND_CLASS_VERSION_V2
Wake Up V2
COMMAND_CLASS_WAKE_UP_V2
Z-Wave Plus Info V2
COMMAND_CLASS_ZWAVEPLUS_INFO_V2
Inclusion
Press once TriSensor’s Action Button. If it is the first installation, the yellow LED will keep solid until whole network processing is complete. If successful, the LED will flash white -> green -> white -> green, after 2 seconds finished. If failed, the yellow LED lasts for 30 seconds, then the green LED flashes once.

If it is the S2 encryption network, please enter the first 5 digits of DSK.

Exclusion
Press once TriSensor’s Action Button, the Purple LED will keep solid until whole network processing is complete. If the exclusion is successful, the LED will flash white -> green ->white -> green and then LED will pulse a blue. If failed, the yellow LED lasts for 30 seconds, then the green LED flashes once.
Device Wake-Up
Press and hold the button at least 2s until Red Led is on and then release the button,device will send wakeup notification to controller if device is in a Z-Wave network.
Factory Reset
1. Power up the device.

2. Press and hold the button for 15s until Red Led is blinking,then release the button

Note: Please use this procedure only when the network primary controller is missing or otherwise inoperable.
S2 Authenticated
S2_AUTHENTICATED
S2 Unauthenticated
S2_UNAUTHENTICATED
Battery Type
Enter the type (e.g. AA, CR2032, AAA) of the battery/batteries that the product uses.
Battery Quantity
Enter the number of batteries of the designated type that the product uses.
Color
If the product is only available in one color, pick the color from the list.
Sensors
Sensor types supported by the product.
Supported Notification Types
Select the Notification Types that the product handles (controllers), or sends (slaves).

 

Avaliações

Escrever uma avaliação

Aeotec TriSensor

Aeotec TriSensor

O TriSensor inclui os 3 sensores básicos para tornar sua casa inteligente: movimento, temperatura e brilho.

Accessories

8 outros produtos na mesma categoria:

Clientes que compraram este produto também compraram: