Aeotec Smart Boost Timer Switch - Temporizador Z-Wave

Características tecnicas

Tecnologia	Z-Wave Plus

Mais Informação

Com o interruptor do temporizador Aeotec Smart Boost, você pode integrar sua caldeira de água quente na rede Z-Wave. Otimize o tempo em que você precisa de água quente individualmente ou por períodos predefinidos de 30, 60, 90 ou 120 minutos.

O controle é feito manualmente no próprio Aeotec Smart Boost Timer Switch ou no sistema Z-Wave via App. O timer pode alternar cargas de até 16A e possui proteção contra sobretensão e função de repetidor.

O Aeotec Smart Boost Timer Switch é um dispositivo habilitado para Z-Wave Plus e pode ser incluído / operado em qualquer rede Z-Wave com outros dispositivos certificados por Z-Wave de outros fabricantes e / ou outros aplicativos. Todos os nós não operados por baterias na rede atuam como repetidores, independentemente do fornecedor, para aumentar a confiabilidade da rede. O comutador de tempo Aeotec Smart Boost suporta a função do medidor de consumo. Quando o dispositivo for incluído na rede, ele informará periodicamente o consumo de energia. Também é um temporizador de contagem regressiva de alta potência que pode ser usado para controlar elementos de aquecimento por imersão ou outros aparelhos elétricos com capacidade de até 16A. No produto, quatro LEDs brancos simples são usados para mostrar ao usuário quanto tempo resta para executar. Pressionando o interruptor enquanto a unidade está em operação, o usuário pode cancelar o programa de temporização e a função de memória do temporizador lembrará o último período selecionado.

Características:

Temporizador para controle manual ou remoto de dispositivos conectados
Apenas utilizável no Reino Unido
Máx. Carga: 16A
Fonte de alimentação: 80 - 250V
Proteção contra sobretensão
Bateria de reserva: CR2032 DC 3V
Padrão de segurança Smart Start e S2
Tecnologia sem fio: Z-Wave Plus

Dimensões do item (LxAxP) 83 x 83 x 47 mm
Dimensões da embalagem (LxAxP) 109 x 109 x 56 mm
Artigo peso líquido 0,165 kg
Peso bruto do item 0,216 Kg
Z-Wave Plus
Onda Z S2
REEE
CE
Grau de proteção IP20

Informação alargada da Z-Wave (Inglês)

Nome: Smart Boost Timer Switch

Fabricante:Aeotec

Identificador:ZWA006-C

Número de Certificação Z-Wave :ZC10-18106255

Plataforma de Hardware :ZM5101

FLiRS:Não

Tipo de Role :Always On Slave

Descrição breve :The Aeotec Smart Boost Timer Switch is a Z-Wave Plus enabled device and can be included/operated in any Z-Wave™ network with other Z-Wave™ certified devices from other manufacturers and/or other applications. All non-battery operated nodes within the network will act as repeaters regardless of vendor to increase reliability of the network.

Descrição :The Aeotec Smart Boost Timer Switch is a Z-Wave Plus enabled device and can be included/operated in any Z-Wave™ network with other Z-Wave™ certified devices from other manufacturers and/or other applications. All non-battery operated nodes within the network will act as repeaters regardless of vendor to increase reliability of the network. The Aeotec Smart Boost Time Switch supports consumption meter function. When the device has been included in the network, it will report the consumption power periodically. It is also a high output countdown timer that can be used to control immersion heater elements or other electrical appliances rated up to 16A. On the product, four simple white LEDs are used to show the user how much time is left to run. Pressing the switch whilst the unit is operating allows the user to cancel the timing program,and the memory function of the timer will remember the last period selected.

Descarregue o manual a partir de aqui.

Grupo

Nodos máximos

Descrição

1

5

COMMAND_CLASS_SWITCH_BINARY/SWITCH_BINARY_REPORT COMMAND_CLASS_METER_V5/METER_REPORT_V5 COMMAND_CLASS_CLOCK/CLOCK_REPORT COMMAND_CLASS_SENSOR_MULTILEVEL_V11/SENSOR_MULTILEVEL_REPORT_V11 COMMAND_CLASS_SCHEDULE/SCHEDULE_STATE_REPORT COMMAND_CLASS_DEVICE_RESET_LOCALLY/DEVICE_RESET_LOCALLY_NOTIFICATION

2

5

COMMAND_CLASS_BASIC/BASIC_SET

Número

Tamanho (Bytes)

Valor por defeito

Nome

Descrição

1

3

Power out action

Action in case of power out. This parameter is used to configure the device state after power on.

2

1

LED status

Configure LED (except boost) to be off irrespective of switch status.

20

2

100

kWh threshold setting

Threshold settings for energy kWh. When the energy above the threshold, it will send a meter report command to gateway.

21

2

100

Watt threshold setting

Threshold settings for Watt automatic report, unit W. When Watt above the threshold, it will send a meter report command to gateway.

22

2

0

Current threshold setting

Threshold settings for Current automatic report, unit 0.1A. When current above the threshold, it will send a meter report command to gateway.

23

4

600

Watt report interval

Watt automatic report interval, unit second.

24

4

600

kWh report interval

kWh automatic report interval, unit second.

25

4

600

Voltage report interval

Voltage automatic report interval, unit second.

26

4

600

Current report interval

Current automatic report interval, unit second.

3

4

0

Auto off timer

Timer acts as auto off after specified minutes, setting is set in seconds.

4

1

Current overload protection

Current and overload protection

5

2

30

Boost time

Configure boost time interval, unit minute.

7

2

100

LED threshold setting

This parameter is used to configure the power led threshold, unit W. When the load <= 100W, the power led will indicate yellow. When the load > 100W, the power led will indicate orange. When no load, the power led will indicate white.

Basic V2

COMMAND_CLASS_BASIC_V2

Association Group Info

COMMAND_CLASS_ASSOCIATION_GRP_INFO

Association V2

COMMAND_CLASS_ASSOCIATION_V2

Basic V2

COMMAND_CLASS_BASIC_V2

Clock

COMMAND_CLASS_CLOCK

Configuration

COMMAND_CLASS_CONFIGURATION

Device Reset Locally

COMMAND_CLASS_DEVICE_RESET_LOCALLY

Firmware Update Meta-Data V4

COMMAND_CLASS_FIRMWARE_UPDATE_MD_V4

Manufacturer Specific V2

COMMAND_CLASS_MANUFACTURER_SPECIFIC_V2

Meter V5

COMMAND_CLASS_METER_V5

Multi-Channel Association V3

COMMAND_CLASS_MULTI_CHANNEL_ASSOCIATION_V3

Powerlevel

COMMAND_CLASS_POWERLEVEL

Schedule

COMMAND_CLASS_SCHEDULE

Security S0

COMMAND_CLASS_SECURITY

Security S2

COMMAND_CLASS_SECURITY_2

Sensor Multilevel V11

COMMAND_CLASS_SENSOR_MULTILEVEL_V11

Supervision

COMMAND_CLASS_SUPERVISION

Switch Binary

COMMAND_CLASS_SWITCH_BINARY

Transport Service V2

COMMAND_CLASS_TRANSPORT_SERVICE_V2

Version V3

COMMAND_CLASS_VERSION_V3

Z-Wave Plus Info V2

COMMAND_CLASS_ZWAVEPLUS_INFO_V2

Inclusion

1. Power on the device, and the power led will blink blue slowly.

2. Put the Z-Wave Primary Controller into inclusion mode (If you don’t know how to do this, refer to its manual)

3. Press and hold the action button, and when the yellow LED is on, release the button. It indicates the device has enter learn mode.

4. If added successfully, the power LED will remain green for 2 seconds, then turn off.

Exclusion

1. Power on the device.

2. Put the Primary Controller into exclusion mode (If you don’t know how to do this refer to its manual)

3. Press and hold the action button, and when the purple LED turns on, release the button. This indicates that the device has entered learn mode. If removal is successful, the blue LED will blink slowly.

Factory Reset

Please use this procedure only when the primary controller is missing or inoperable.

1. Make sure the device has been powered.

2. Press and hold the action button for 15 seconds. When the red LED turns on, release the button. Then, the device will enter factory reset mode. If the reset is successful, the LED will blink blue slowly.

Additional Special Features

Boost Mode

1. Power on the device.

a) Press and hold the button about 1 second, when the power LED turns white, release the button. Then the 1st boost time LED will turn on. This indicates that the device entered boost mode. The switch will turn on immediately and will turn off after 30 minutes (This time can be changed through Configuration Parameter 5).

b) Press and hold the button about 1 second after doing a), when the power LED turns white, release the button. The 1st and 2nd boost time LEDs will turn on, which means the switch will turn off after 60 minutes.

c) Press and hold the button about 1 second after doing b), when the power LED turns white release the button. The 1st, 2nd and 3rd boost time LEDs will turn on, which means the switch will turn off after 90 minutes.

d) Press and hold the button about 1 second after doing c), when the power LED turns white release the button. The 1st, 2nd, 3rd, and 4th boost time LEDs will turn on, which means the switch will turn off after 120 minutes.

e) Press and hold the button about 1 second after doing d), when the power LED turn off release the button. Then all of the boost time leds will turn off, which indicates that boost mode has been exited.

2. Press and hold the button about 5 seconds.

a) When the power LED turns green, release the button, and the device will enter an override schedule state. At this state, the schedule task doesn’t work. The switch can only be turned on or off from the gateway.

b) When the power LED turns red, release the button, and the device will exit the override schedule state.

S2 Authenticated

S2_AUTHENTICATED

S2 Unauthenticated

S2_UNAUTHENTICATED

Switch Type

Describes the type of operator for a switch.

Switch Load Capacity Current

The amount of switch load energy the product is rated for in Amps

Supported Meter Type

Indicate which type of metering is supported by the device.

Firmware Updatable

Indicates whether the firmware can be updated and whether it is done by the consumer or a technician.