Produtos visualizados





Confianza Online


Reduced price! Enchufe Z-Wave Schuko con medición de consumo de Popp View larger

Philio PAN11 - Schuko Z-Wave plug com medição de consumo

PHI_PAN11

Novo

Ficha inteligente de interruptor Z-Wave com controle de consumo elétrico do fabricante Philio

Mais detalhes

Em estoque

47,25 €

-10%

52,50 €

Características tecnicas

Tecnologia Z-Wave Plus
Recurso Medição de Consumo

Mais Informação

É um switch Z-Wave plug-in, que pode ser colocado entre um soquete de parede do tipo Schuko e eletrodomésticos ou aparelhos com uma carga de até 3000W, conectados através de um cabo. Além disso, este inteligente plug-switch é capaz de detectar a voltagem, o fator de potência e o consumo de energia consumido (em Wh) e também medir a energia elétrica consumida em kWh. Ele também detecta uma possível sobrecarga (3010 ~ 3300W) dos dispositivos ou dispositivos conectados ao plugue. Quando detecta uma sobrecarga elétrica, o módulo é desativado e o LED pisca por 30 segundos. Caso o dispositivo seja usado apenas para medição, uma opção de configuração especial impede que o plugue desligue os dispositivos durante o carregamento.

As especificações técnicas:

  • Tecnologia: Z-Wave (868,42 MHz) - v6.02
  • Potência de saída: + 2.5dBm (comparado a -2.5dBm para outros módulos)
  • Carga máxima: 3.000W (Resistiva), 1.500W (Incandescente), 320W (Fluorescente)
  • Voltagem: 90 - 240VAC
  • Proteção contra sobrecarga: 3.300W
  • Medição: consumo atual (W) e consumo acumulado (kWh)
  • Botões: On / Off / Include
  • Indicador de status: LED

Informação alargada da Z-Wave (Inglês)

Nome: Smart Energy Plug In Switch
Fabricante:Philio
Identificador:PAN11-1B
Número de Certificação Z-Wave :ZC10-15125001
Plataforma de Hardware :SD3502
FLiRS:Não
Tipo de Role :Always On Slave
Descrição breve :This plug-in ON/OFF switch PAN11 is a security enabled wireless switch, based on Z-Wave technology. This plug-in ON/OFF switch is able to detect current wattage and overload wattage of connected lights or appliances.
Descrição :This plug-in ON/OFF switch PAN11 is a security enabled wireless switch, based on Z-Wave Plus technology. Z-Wave PlusTM enabled devices displaying the Z-Wave PlusTM logo can also be used with it regardless of the manufacturer, and can also be used in other manufacturer’s Z-WaveTM enabled networks. Remote On/Off control of the connected load is possible with other manufacturer’s wireless Controller. Each switch is designed to act as a repeater. Repeaters will re-transmit the RF signal to ensure that the signal is received by its intended destination by routing the signal around obstacles and radio dead spots. Because PAN11 supports Security Command Class, it can learn with Secured controller. Its functionality and supported command classes is identical when included as a secure and non-secure device. This plug-in ON/OFF switch is able to detect instance wattage (3000W/CE/CN, 1560W/UL/TW/JP) and overload current (14.5A with resistive load) of connected lights or appliances. When detecting overload state, the Switch will be disabled and its On/Off button will be lockout of which LED will flash quickly. However, unplug and re-connect the switch will reset its overload condition to normal status. Adding to Z-WaveTM Network In the front casing, there is an On/Off button with LED indicator which is used to toggle switch on and off or carry out inclusion, exclusion, reset or association. When first power is applied, its LED flashes on and off alternately and repeatedly at 0.5 second intervals. It implies that it has not been assigned a node ID and start auto inclusion. Auto Inclusion The function of auto inclusion will be executed as long as the switch does not have Node ID and just plug the switch into a wall outlet. Note: Auto inclusion timeout is 2 minute during which the node information of explorer frame will be emitted once several seconds. Unlike “inclusion” function as shown in the table below, the execution of auto inclusion is free from pressing the On/Off button on the Switch.

Descarregue o manual a partir de aqui.

Grupo
Nodos máximos
Descrição
1
1
Lifeline For group 1, the Switch will report ON/OFF status and meter value.
Número
Tamanho (Bytes)
Valor por defeito
Nome
Descrição
1
2
720
Watt Meter Report Period
If the setting is configured for 1hour (set value =720), the PAN11 will report its instant power consumption every 1 hour to Group1 node. The maximum interval to report its instant power consumption is 45 hours (5s*32767/3600=45hr).
11
1
1
Manual Switch Report mode
Whenever PAN11 is manually switch on or off, it will send BINARY_SWITCH_REPORT to the node of group1. The default setting is Enable the function.
2
2
6
KWH Meter Report Period
If the setting is configured for 1hour (set value =6), the PAN11 will report its Accumulated Power Consumption (KW/h) every 1 hour to Group1 node. The maximum interval to report its Accumulated Power Consumption (KW/h) is 227.55 days (10min*32767/1440=227.55 days).
3
2
1300
Threshold of current for Load Caution
This is a warning when the current of load over the preset threshold value, if the setting value is 1300, when the load current of Relay1 over this value, PAN11 will send current meter report to warn the Group1 node, the Range of the setting value is from 10 to 1300,and the default value is 1300.
4
2
10000
Threshold of KWh for Load Caution
This is a warning when the KWh of load over the preset threshold value, If the setting value is 10000, when the Accumulated Power Consumption of Relay1 over this value, PAN11 will send KWH meter report to warn the Group1 node, minimum value is 1KWh and default value is 10000 kWh.
5
1
1
Restore switch state mode
Whenever the AC power return from lost, PAN11 will restore the switch state which could be SWITCH OFF、LAST SWITCH STATE、SWITCH ON. The default setting is LAST SWITCH STATE.
6
1
1
Mode of switch off function
When the mode of switch On/Off is set to 0, any command of switch off will be disabled and the On/Off function of include button will be disabled. The default setting is enable mode. When manual On/Off function is disabled, the RF command can only switch On but not Off. This is useful function for keeping the device in switch on state.
7
1
1
LED indication mode
1. Show Switch State:When switch is on, LED is on. When switch is off, LED is off. The default setting is Show Switch State. 2. Show Night mode:When switch is on, LED is off. When switch is off, LED is on. 3. One Flash mode:When the state of switch changes, LED will be on only one second, then LED keeps off.
8
2
0
Auto off timer
Whenever PAN11 switches to on, the auto off timer begin to count down. After the timer decrease to zero, it will switch to off automatically. However if Auto off timer is set as 0, the auto off function will be disabled. The default setting is 0.
9
1
0
RF off command mode
Whenever a switch off command, BASIC_SET、BINARY_SWITCH_SET、SWITCH_ALL_OFF, is received, it could be interpreted as 4 variety of commands. 1. Switch Off:It switches to OFF state. The default setting is Switch Off. 2. Ignore:The switch off command will be ignored. 3. Switch Toggle:It switches to the inverse of current state. 4. Switch On:It switches to ON state.
Inclusion
1. Put your Z-Wave controller into inclusion mode by following the instructions provided by the controller manufacturer.

2. Pressing On/Off button three times within 2 seconds will enter inclusion mode.
Exclusion
1. Put your Z-Wave controller into exclusion mode by following the instructions provided by the controller manufacturer.

2. Pressing On/Off button three times within 2 seconds will enter exclusion mode.
Factory Reset
Use this procedure only in the event that the primary controller is lost or otherwise inoperable.



1. Pressing On/Off button three times within 2 seconds will enter inclusion mode. Use this procedure only in the event that the primary controller is lost or otherwise inoperable.

2. Within 1 second, press On/Off button again for 5 seconds.

 

Avaliações

Escrever uma avaliação

Philio PAN11 - Schuko Z-Wave plug com medição de consumo

Philio PAN11 - Schuko Z-Wave plug com medição de consumo

Ficha inteligente de interruptor Z-Wave com controle de consumo elétrico do fabricante Philio

13 outros produtos na mesma categoria:

Clientes que compraram este produto também compraram: