Produtos visualizados





Confianza Online


domoticalia.es/es/ Reviews with ekomi.es
Aeotec Siren 6 - Sirena interior Z-Wave + View larger

Sirene Aeotec 6 - Z-Wave + sirene interior

AEO-ZW164

Novo

Esta sirene interna é o sistema de alerta mais popular no ecossistema Z-Wave. Ele se conecta a uma tomada convencional e tem uma bateria de backup.

Mais detalhes

Em estoque

79,99 €

Características tecnicas

Tecnologia Z-Wave Plus

Mais Informação

Sirene interna inteligente para sua casa.

Você pode usar a tecnologia Z-Wave para tornar sua casa mais inteligente. Você pode usar a tecnologia Z-Wave para tornar sua casa mais segura. E você pode usar o Siren 6 para tornar sua casa mais inteligente, segura e protegida.

Sirene 6 para segurança.

Seja monitorado remotamente ou auto-supervisionado, Siren 6 é a sirene interna ideal para um sistema de segurança Z-Wave. Em caso de intrusão ou roubo detectado por vários sensores Z-Wave, o Siren 6 pode emitir um dos 15 tons pré-configurados com um nível de som máximo de 110 decibéis.

Sirene 6 para segurança.

Aprimorado com a tecnologia Z-Wave, o Siren 6 não é apenas parte de seu sistema de segurança residencial, mas também parte de seu sistema de segurança residencial. Em uma emergência, ou se você precisar ser alertado, o Siren 6 pode ser usado como um alto-falante adicional para outros dispositivos conectados, incluindo detectores de fumaça e vazamento de ondas Z.

Siren 6 para mais.

O Siren 6 é realmente o sistema de alerta mais conectado do ecossistema Z-Wave. Fácil de configurar como uma sirene, é igualmente fácil de se transformar em uma campainha. Combinada com um acessório opcional, o botão, a Siren 6 oferecerá os mesmos recursos da campainha Z-Wave da Aeotec, a campainha 6.

Alto-falante de 110dB.

O impressionante alto-falante de 110dB do Siren 6 é a primeira linha de defesa em sua casa no caso de uma intrusão. Se for demais para as suas necessidades, a Siren 6 pode ser configurada para soar um alarme entre 80 e 110 dB.

Alertas visuais.

Se os alertas de áudio não chamam sua atenção, os alertas visuais do Sirena 6 saberão. Cada sirene possui vários LEDs estroboscópicos embutidos em sua face, capazes de avisar visualmente sobre um incidente com 1.000 lumens de luz.

Bateria de reserva.

Às vezes, emergências acontecem quando falta energia. Às vezes, é a emergência que causa isso, por exemplo, um intruso se preparando para entrar. O Siren 6 inclui uma bateria de backup recarregável embutida, o que significa que pode funcionar por até 4 horas, mesmo em caso de falha de energia.

Z-Wave Plus S2.

É por isso que a segurança do seu Sirena 6 também é benéfica. Utilizando a combinação exclusiva da Aeotec de Z-Wave Plus e S2, o Siren 6 oferece 3 níveis diferentes de segurança sem fio para evitar a interferência de hackers e intrusos.

Na tomada.

Sem fiação complexa. Sem instalações caras. Configurar a Siren 6 não poderia ser mais fácil. Selecione o local desejado em sua casa, conecte-o a uma tomada próxima e emparelhe-o com seu sistema Z-Wave.

Seguro.

Depois de configurado, a instalação do Siren 6 pode ser tão simples quanto colocá-lo em uma prateleira. Ele também pode ser preso e fixado a uma superfície, como uma parede ou teto, usando a placa de montagem em parede e os parafusos fornecidos.

FUNÇÕES:

Sirene Z-Wave
Alertas visuais e sonoros
Pequeno, discreto e estético
Atualização de firmware OTA
Suporta estrutura de segurança S2
Deteção de bateria fraca
Suporta até 3 botões
Vários sons integrados, até 30
Volume ajustável
Fácil de instalar e usar

AS ESPECIFICAÇÕES TÉCNICAS

Alimentação: adaptador 5VDC / bateria recarregável 3,7V 400mAh
Vida útil da bateria: 2 anos
Consumo máximo de energia em modo de espera: 0,7 W
Frequência: 868,42 MHz
Distância de transmissão: 150m ao ar livre
Volume máximo: 105dB de 5cm
Dimensões: 76 x 76 x 76 x 76 x 38,5 mm
Proteção IP: IP20

Informação alargada da Z-Wave (Inglês)

Nome: Indoor Siren 6
Fabricante:Aeotec
Identificador:ZW164-C
Número de Certificação Z-Wave :ZC10-19046420
Plataforma de Hardware :ZM5101
FLiRS:Não
Tipo de Role :Always On Slave
Descrição breve :Built-in multiple tones and light effects, Indoor Siren 6 is a smart siren based on Z-Wave and 433.92MHz/FSK.
Descrição :- S2 Security. - Not only a siren, but also can be used as a doorbell via setting. - Can be wireless controlled by more Button, up to 3. - Longer Button control distance, up to 120m. - Built-in multiple tones, up to 30. - Built-in multiple adjustable Light Effect.

Descarregue o manual a partir de aqui.

Grupo
Nodos máximos
Descrição
1
5
Lifeline group. (1) Device Reset Locally Notification, issued when Factory Reset is performed. (2) Sound Switch Tone Play Report, issued when a tone has started playing. (3) Sound Switch Configuration Report, issued when volume or default tone has changed. (4) Notification Report (Type=0x0E; Event=0x01), issued when Chime starts playing tone. (5) Notification Report (Type=0x0E; Event=0x00), issued when Chime stops playing tone. (6) Notification Report (Type=0x07; Event=0x09), issued when Chime is tampered and moved. (7) Notification Report (Type=0x08; Event=0x0A), issued when Button is low battery. (8) Notification Report (Type=0x08; Event=0x00), issued when Button comes back to normal battery. (9) Configuration Report (Parameter=0x32), issued when Pairing Button Mode is triggered. (10) Configuration Report (Parameter=0x33), issued when Unpairing or Pairing Button Mode finishes.
2
5
Mirror of Endpoint 1, group 2. When Endpoint 1 starts playing tone or stops playing tone, Nodes associated are controlled and will receive a Basic Set CC.
3
5
Mirror of Endpoint 2, group 2. When Endpoint 2 starts playing tone or stops playing tone, Nodes associated are controlled and will receive a Basic Set CC.
4
5
Mirror of Endpoint 3, group 2. When Endpoint 3 starts playing tone or stops playing tone, Nodes associated are controlled and will receive a Basic Set CC.
5
5
Mirror of Endpoint 4, group 2. When Endpoint 4 starts playing tone or stops playing tone, Nodes associated are controlled and will receive a Basic Set CC.
6
5
Mirror of Endpoint 5, group 2. When Endpoint 5 starts playing tone or stops playing tone, Nodes associated are controlled and will receive a Basic Set CC.
7
5
Mirror of Endpoint 6, group 2. When Endpoint 6 starts playing tone or stops playing tone, Nodes associated are controlled and will receive a Basic Set CC.
8
5
Mirror of Endpoint 7, group 2. When Endpoint 7 starts playing tone or stops playing tone, Nodes associated are controlled and will receive a Basic Set CC.
9
5
Mirror of Endpoint 8, group 2. When Endpoint 8 starts playing tone or stops playing tone, Nodes associated are controlled and will receive a Basic Set CC.
Número
Tamanho (Bytes)
Valor por defeito
Nome
Descrição
1
4
16777216
Configure the Light Effect and Tone Play Mode for Endpoint 1(Browse).
Please refer to the Product Manual for more details.
16
4
1259934723
Configure #1 Light Effect.
Please refer to the Product Manual for more details.
17
4
842137603
Configure #2 Light Effect.
Please refer to the Product Manual for more details.
18
4
2162947
Configure #3 Light Effect.
Please refer to the Product Manual for more details.
19
4
553648131
Configure #4 Light Effect.
Please refer to the Product Manual for more details.
2
4
16777217
Configure the Light Effect and Tone Effect for Endpoint 2(Tampering).
Please refer to the Product Manual for more details.
20
1
10
Configure #5 Light Effect.
Please refer to the Product Manual for more details.
21
4
2560
Configure #6 Light Effect.
Please refer to the Product Manual for more details.
22
4
553648129
Configure #7 Light Effect.
Please refer to the Product Manual for more details.
255
4
0
Factory Reset or Initialization (Write Only)
Parameter 51/52/53/54 will not restore the configuration settings to the default when Factory Reset or Initialization is performed.
3
4
33554433
Configure the Light Effect and Tone Effect for Endpoint 3(Doorbell 1).
Please refer to the Product Manual for more details.
32
1
3
Configure how to send Basic Set to nodes in Group 2.
33
1
3
Configure how to send Basic Set to nodes in Group 3.
34
1
3
Configure how to send Basic Set to nodes in Group 4.
35
1
3
Configure how to send Basic Set to nodes in Group 5.
36
1
3
Configure how to send Basic Set to nodes in Group 6.
37
1
3
Configure how to send Basic Set to nodes in Group 7.
38
1
3
Configure how to send Basic Set to nodes in Group 8.
39
1
3
Configure how to send Basic Set to nodes in Group 9.
4
4
33554433
Configure the Light Effect and Tone Effect for Endpoint 4(Doorbell 2).
Please refer to the Product Manual for more details.
48
1
0
Tigger Unpairing Button Mode (Write Only)
(1) Can trigger unpairing multiple Buttons at one time. (2) User does not need to do anything to Button. (3) Indicator Light will quickly flash white light 3 times when Unpairing Button Mode finishes.
49
1
0
Tigger Pairing Button Mode (Write Only)
(1) Can NOT trigger pairing multiple Buttons at one time. (2) Pairing time is up to 10 seconds. In this time period, user MUST manually click Ring Button 3 times quickly. Otherwise it cannot be paired successfully. (3) Each successful pairing will overwrite the previous paired Button which has the same Button Number.
5
4
33554433
Configure the Light Effect and Tone Effect for Endpoint 5(Doorbell 3).
Please refer to the Product Manual for more details.
50
1
0
Report which Pairing Button Mode is triggered (Read Only)
Once Pairing Button Mode is triggered, node will automatically send this configuration report via Lifeline to inform which Button is waiting for being paired.
51
1
0
Report which Buttons had been paired (Read Only)
Once Unpairing or Pairing Button Mode finishes, node will automatically send this configuration report via Lifeline to inform which Buttons had been paired. This parameter does not restore to the default value when Chime is removed from the network or reset the factory settings.
52
4
0
Get the information of #1 Button (Read Only)
This parameter does not restore to the default value when Chime is removed from the network or reset the factory settings.
53
4
0
Get the information of #2 Button (Read Only)
This parameter does not restore to the default value when Chime is removed from the network or reset the factory settings.
54
4
0
Get the information of #3 Button (Read Only)
This parameter does not restore to the default value when Chime is removed from the network or reset the factory settings.
6
4
67108864
Configure the Light Effect and Tone Effect for Endpoint 6(Environment).
Please refer to the Product Manual for more details.
7
4
67108864
Configure the Light Effect and Tone Effect for Endpoint 7(Security).
Please refer to the Product Manual for more details.
8
4
67108864
Configure the Light Effect and Tone Effect for Endpoint 8(Emergency).
Please refer to the Product Manual for more details.
96
1
0
Enable or Disable the ability that click the Action Button to stop a playing tone.
Basic
COMMAND_CLASS_BASIC
Association Group Info
COMMAND_CLASS_ASSOCIATION_GRP_INFO
Association V2
COMMAND_CLASS_ASSOCIATION_V2
Basic
COMMAND_CLASS_BASIC
Configuration
COMMAND_CLASS_CONFIGURATION
Device Reset Locally
COMMAND_CLASS_DEVICE_RESET_LOCALLY
Firmware Update Meta-Data V4
COMMAND_CLASS_FIRMWARE_UPDATE_MD_V4
Manufacturer Specific V2
COMMAND_CLASS_MANUFACTURER_SPECIFIC_V2
Multi-Channel Association V3
COMMAND_CLASS_MULTI_CHANNEL_ASSOCIATION_V3
Multi-Channel V4
COMMAND_CLASS_MULTI_CHANNEL_V4
Notification V8
COMMAND_CLASS_NOTIFICATION_V8
Powerlevel
COMMAND_CLASS_POWERLEVEL
Security S0
COMMAND_CLASS_SECURITY
Security S2
COMMAND_CLASS_SECURITY_2
Sound Switch
COMMAND_CLASS_SOUND_SWITCH
Supervision
COMMAND_CLASS_SUPERVISION
Transport Service V2
COMMAND_CLASS_TRANSPORT_SERVICE_V2
Version V2
COMMAND_CLASS_VERSION_V2
Z-Wave Plus Info V2
COMMAND_CLASS_ZWAVEPLUS_INFO_V2
Exclusion
1. Set your Z-Wave Controller into its ' Remove Device' mode in order to remove Chime from your Z-Wave system. Refer to the Controller's manual if you are unsure of how to perform this step.



2. Power on Chime via the provided power adapter; its LED will be off.



3. Click Chime Action Button 6 times quickly; it will bright white light, up to 2s.



4. If Removing fails, it will keep off; repeat steps 1 to 3. Contact us for further support if needed.



5. If Removing succeeds, it will quickly flash white light 3 times and then become breathing white light. Now, Chime is removed from Z-Wave network successfully.
Inclusion
This product supports Security 2 Command Class. While a Security S2 enabled Controller is needed in order to fully use the security feature. This product can be included and operated in any Z-Wave network with other Z-Wave certified devices from other manufacturers and/or other applications. All non-battery operated nodes within the network will

act as repeaters regardless of vendor to increase reliability of the network.



1. Set your Z-Wave Controller into its 'Add Device' mode in order to add Chime into your Z-Wave system. Refer to the Controller's manual if you are unsure of how to perform this step.



2. Power on Chime via the provided power adapter; its LED will be breathing white light all the time.



3. Click Chime Action Button once, it will quickly flash white light for 30 seconds until Chime is added into the network. It will become constantly bright white light after being assigned a NodeID.



4. If your Z-Wave Controller supports S2 encryption, enter the first 5 digits of DSK into your Controller's interface if/when requested. The DSK is printed on Chime's housing.



5. If Adding fails, it will slowly flash white light 3 times and then become breathing white light; repeat steps 1 to 4. Contact us for further support if needed.



6. If Adding succeeds, it will quickly flash white light 3 times and then become off. Now, Chime is a part of your Z-Wave home control system. You can configure it and its automations via your Z-Wave system; please refer to your software's user guide for precise instructions.



Note:

If Action Button is clicked again during the Learn Mode, the Learn Mode will exit. At the same time, Indicator Light will extinguish immediately, and then become breathing white light.
Factory Reset
If the primary controller is missing or inoperable, you may need to reset the device to factory settings.



Make sure the Chime is powered. To complete the reset process manually, press and hold the Action Button for at least 20s. The LED indicator will quickly flash white light 3 times and then become breathing white light, which indicates the reset operation is successful. Otherwise, please try again. Contact us for further support if needed.



Note:

1. This procedure should only be used when the primary controller is missing or inoperable.

2. Factory Reset Chime will:

(a) Remove Chime from Z-Wave network;

(b) Delete the Association setting;

(c) Restore the configuration settings to the default.(Except configuration parameter 51/52/53/54)
S2 Authenticated
S2_AUTHENTICATED
S2 Unauthenticated
S2_UNAUTHENTICATED
Firmware Updatable
Indicates whether the firmware can be updated and whether it is done by the consumer or a technician.
Outdoor Use
Product is suitable for use outdoors.
Sensors
Sensor types supported by the product.
Color
If the product is only available in one color, pick the color from the list.
Supported Notification Types
Select the Notification Types that the product handles (controllers), or sends (slaves).

 

Avaliações

Escrever uma avaliação

Sirene Aeotec 6 - Z-Wave + sirene interior

Sirene Aeotec 6 - Z-Wave + sirene interior

Esta sirene interna é o sistema de alerta mais popular no ecossistema Z-Wave. Ele se conecta a uma tomada convencional e tem uma bateria de backup.

7 outros produtos na mesma categoria:

Clientes que compraram este produto também compraram: