Produtos visualizados





Confianza Online


Bombilla LED RGBW con Z-Wave integrado de Aeon Labs

AEOEZW098

Novo

Bombilla inteligente LED con posibilidad de luz blanca y hasta 16 millones de colores RGBW, controlada mediante Z-Wave, con 9W de consumo equivalentes a 70W de potencia luminica convencional 

Mais detalhes

Em estoque

45,80 €

-24,00 €

69,80 €

Características tecnicas

Tecnologia Z-Wave Plus

Mais Informação

Con la nueva e inteligente bombilla de AEOTEC - Aeon Labs el color entra en escena mas fácilmente. Esta bombilla inteligente de Aeotec se ajusta a cualquier casquillo convencional de tipo E27 y se conecta a una Unodad de Control domótico a través de la tecnología inalámbrica Z-Wave sin necesidad de accesorios intermedios o adicionales. Puede variar el brillo y el color de la luz. Ofrecer luz natural, similar a la de una vela o para crear ambientes de fiesta. Ahora puede crear diferentes atmósferas controlando la luz según sus deseos.
 
La bombilla utiliza 15 tipos diferentes de diodos LED para brillar hasta incluso ofrecer lo más parecido a la luz natural blanca. Estos 15 diodos confieren una temperatura de la luz de 2580-7050K en la bombilla LED inteligente.
Blanco frío: 4745K a 7050K
Blanco Natural: 3710K a 4745 K
Blanco cálido: 2580K a 3710K 
Fabricantes bien conocidos como Samsung y Philips utilizan la misma tecnología LED.
 
Una fila adicional de diodos LED permite a la bombilla inteligente Z-Wave de Aeotec la oportunidad de variar entre 16 millones de colores.
 
Además esta bombilla inteligente Z-Wave puede encenderse y apagarse de forma programada en el tiempo mediante escenas definidas o, por ejemplo, mediante un sensor de presencia. Utilice su bombilla Aeotec como si fuera un LED de notificación o estado. Instalada en un pasillo podria encenderse de forma intermitente de color rojo si al salir de casa se deja abiertas las ventanas o la terraza. Gracias a la tecnología LED, el consumo eléctrico es muy bajo comparado con las bombillas convencionales. La bombilla inteligente Z-Wave de Aeotec ofrece la misma intensidad lumínica que una bombilla convencional de 70W, pero en realidad sólo consume 9W.
 
Características:
Luminosidad equivalente a 70W con tan solo 9W de consumo eléctrico
Para uso en exterior o en interior, indistintamente
Actúa como repetidor Z-Wave
Angulo de iluminación: 180°

Informação alargada da Z-Wave (Inglês)

Nome: LED Bulb
Fabricante:Aeotec
Identificador:ZW098-C55
Número de Certificação Z-Wave :ZC10-16065126
Plataforma de Hardware :ZM5101
FLiRS:Não
Tipo de Role :Always On Slave
Descrição breve :Aeotec LED Bulb is a low-cost Z-Wave LED module which allows control (on/off/dim) with the use of Z-Wave.
Descrição :Aeotec LED Bulb is a low-cost Z-Wave LED module which allows control (on/off/dim) with the use of Z-Wave. It’s a bulb has a Smart RGB LED, which can be used to add colour to your home. The bulb has 5 main colour channels available for you to adjust: Red, Green, Blue, Warm White and Cold White. You can configure its colour according to your favour. The LED Bulb is also a security Z-Wave device and supports the Over The Air (OTA) feature for the product’s firmware upgrade.

Descarregue o manual a partir de aqui.

Grupo
Nodos máximos
Descrição
1
5
The association group 1 is the Z-Wave Lifeline group. The Hail CC and Basic Report CC (configurable) can be sent to the associated nodes in association group 1.
2
5
In this group, the Basic Set, Switch Binary Set, Switch Multilevel Start Level Change, Switch Multilevel Stop Level Change, Switch Multilevel Set, Scene Activation Set commands would be sent to the associated nodes in association group 2 when the Bulb receives the Basic Set, Switch Binary Set, Switch Multilevel Start Level Change, Switch Multilevel Stop Level Change, Switch Multilevel Set, Scene Activation Set commands from the main controller.
Número
Tamanho (Bytes)
Valor por defeito
Nome
Descrição
112
1
0
Set the Dimmer mode.
Set the Dimmer mode.
20
1
1
Set the bulbs state after it is re-powered on
Set the bulbs state after it is re-powered on.
252
1
0
Enable/disable Lock Configuration
Enable/disable to lock Configuration parameters.
255
4
0
Reset the Bulb
Reset the Bulb to factory default.
32
1
0
Enable/disable to send out a report when the color is changed.
Enable/disable to send out a report when the color is changed.
33
4
0
Get the Bulb’s color value.
Get the Bulb’s color value. Note: This parameter is a get-only parameter.
34
1
0
Enable/disable the function of using External Switch to turn on/off the bulb.
Enable/disable the function of using External Switch to turn on/off the bulb.
35
1
1
Enable/disable the function of using External Switch to changes the bulb’s color.
Enable/disable the function of using External Switch to changes the bulb’s color.
36
1
0
Reboot/save/exit Colorful mode.
Reboot/save/exit Colorful mode. Note: This parameter is a set-only parameter.
37
4
157483008
Colorful mode configuration.
Configure the Colorful mode.
38
4
50332416
Change speed
Set the Change speed.
39
4
2003125025
Color index configuration when the bulb is in Multi color mode.
Color index configuration when the bulb is in Multi color mode.
80
1
1
To set whcih notification can be sent to the associated devices (Group 1) when the state of LED Bulb is changed.
To set whcih notification can be sent to the associated devices (Group 1) when the state of LED Bulb is changed.
Basic
COMMAND_CLASS_BASIC
Hail
COMMAND_CLASS_HAIL
Additional Special Features
Support ""Over the Air Firmware Updating"" and “Z-Wave Security”.

Inclusion
Turn the primary controller of Z-Wave network into inclusion mode, press the external switch of LED Bulb to turn it off and then press the external switch again to turn it on.
Exclusion
Turn the primary controller of Z-Wave network into exclusion mode, press the external switch of LED Bulb to turn off and then press the external switch again to turn on it, repeat the operation 3 times.
Factory Reset
Turn the controller of Z-Wave network into exclusion mode, press the external switch of LED Bulb to turn off and then press the external switch again to turn on it, repeat the operation 3 times.

After the LED Bulb is excluded from network, it will be reset to factory default state.

Use this procedure only in the event that your primary network controller is missing or inoperable.
Switch Type
Describes the type of operator for a switch.
Z-Wave Scene Type
Indicates which of the two types of Z-Wave scene command classes are supported. Scenes or Central Scene

 

Avaliações

Escrever uma avaliação

Bombilla LED RGBW con Z-Wave integrado de Aeon Labs

Bombilla LED RGBW con Z-Wave integrado de Aeon Labs

Bombilla inteligente LED con posibilidad de luz blanca y hasta 16 millones de colores RGBW, controlada mediante Z-Wave, con 9W de consumo equivalentes a 70W de potencia luminica convencional 

6 outros produtos na mesma categoria:

Clientes que compraram este produto também compraram: