Produtos visualizados





Confianza Online


AEOTEC Bombilla LED 6 Multi-Color (E27)

AEOEZWA001

Novo

Em estoque

39,99 €

Características tecnicas

Tecnologia Z-Wave Plus

Informação alargada da Z-Wave (Inglês)

Nome: LED Bulb 6: Multi-White
Fabricante:Aeotec
Identificador:ZWA001-C
Número de Certificação Z-Wave :ZC10-18036060
Plataforma de Hardware :ZM5101
FLiRS:Não
Tipo de Role :Always On Slave
Descrição breve :Dimmable from 5% to 100%, tunable from 2700K to 6500K.
Descrição :Standard form factor and appearance of the light bulb with 800 lm output Tunable white: dimmable from 5% to 100%, tunable from 2700K to 6500K. Possible to be included in groups, scenes, or schedules Suitable for indoor lighting: Corridors, Bedroom, Living Room, etc.

Descarregue o manual a partir de aqui.

Grupo
Nodos máximos
Descrição
1
1
LED Bulb will send its status to the lifeline group when the state of the LED Bulb is changed. 1). Set Configuration parameter 0x50 to 0: nothing 2). Set Configuration parameter 0x50 to 1: Sending Basic Report
Número
Tamanho (Bytes)
Valor por defeito
Nome
Descrição
80
1
1
Enable to send notifications to associated devices
Enable to send notifications to associated devices (Group 1) when the state of LED Bulb is changed. 0 = Nothing. 1= Basic CC report.
81
2
2700
Adjusting the color temperature in warm white color component.
Adjusting the color temperature in warm white color component. available value: 0x0A8C-1387 Warm White(0x0A8C(2700k) ~ 0x1387 (4999k))
82
2
6500
Adjusting the color temperature in cold white color component
Adjusting the color temperature in cold white color component. available value:0x1388-0x1964 Cold White (0x1388 (5000k) ~ 0x1964 (6500k))
Association Group Info
COMMAND_CLASS_ASSOCIATION_GRP_INFO
Association V2
COMMAND_CLASS_ASSOCIATION_V2
Basic
COMMAND_CLASS_BASIC
Configuration
COMMAND_CLASS_CONFIGURATION
Device Reset Locally
COMMAND_CLASS_DEVICE_RESET_LOCALLY
Firmware Update Meta-Data V4
COMMAND_CLASS_FIRMWARE_UPDATE_MD_V4
Manufacturer Specific V2
COMMAND_CLASS_MANUFACTURER_SPECIFIC_V2
Powerlevel
COMMAND_CLASS_POWERLEVEL
Scene Activation
COMMAND_CLASS_SCENE_ACTIVATION
Scene Actuator Conf
COMMAND_CLASS_SCENE_ACTUATOR_CONF
Security S0
COMMAND_CLASS_SECURITY
Security S2
COMMAND_CLASS_SECURITY_2
Supervision
COMMAND_CLASS_SUPERVISION
Switch Color V2
COMMAND_CLASS_SWITCH_COLOR_V2
Switch Multilevel V2
COMMAND_CLASS_SWITCH_MULTILEVEL_V2
Transport Service V2
COMMAND_CLASS_TRANSPORT_SERVICE_V2
Version V2
COMMAND_CLASS_VERSION_V2
Z-Wave Plus Info V2
COMMAND_CLASS_ZWAVEPLUS_INFO_V2
Exclusion
Remove for exclusion:

a) Set the Z-Wave network main controller into removing mode.

b) Led bulb re-power 3 times (between 0.5-2 seconds each time).

c) Wait a moment, the led bulb should be removed from the controller.Then the led bulb will flash once, dim to 5% first, and then increased to 100% after 5 seconds.

Inclusion
Add for inclusion:

a) Set the Z-Wave network main controller into adding mode.

b) Power cycle once for led bulb(OFF->ON).The led bulb will flash twice and send node info frame.

c) Wait a moment, the led bulb should be added to the controller.Then the led bulb will flash once when it has been included into the network.

Factory Reset
Reset the device :

a) Please use this procedure only when the network primary controller is missing or otherwise inoperable.

b) Led bulb re-power 6 times (between 0.5-2 seconds each time); If the 6th power on, the led bulb flashes twice, which means that the resetting is successful.

S2 Unauthenticated
S2_UNAUTHENTICATED
Color
If the product is only available in one color, pick the color from the list.
Firmware Updatable
Indicates whether the firmware can be updated and whether it is done by the consumer or a technician.

 

Avaliações

Escrever uma avaliação

AEOTEC Bombilla LED 6 Multi-Color (E27)

AEOTEC Bombilla LED 6 Multi-Color (E27)

6 outros produtos na mesma categoria:

Clientes que compraram este produto também compraram: