Productos más vistos





Confianza Online


domoticalia.es/es/ Reviews with ekomi.es

Interruptor Inteligente Aeotec Heavy Duty Smart Switch para alta carga con medida de consumo Z-Wave Plus (GEN5)

AEO_ZW078-ZWEU

Nuevo

Interruptor inteligente Aeotec Heavy Duty Smart Switch Z-Wave Plus (GEN5) de AEON LABS para grandes cargas y alta potencia (heavy duty)

Más detalles

En Stock - Envío inmediato

119,95 €

Características técnicas

Tecnología Z-Wave Plus
Característica Medición de Consumo

Descripción

Se trata de un interruptor Z-Wave Plus (GEN5), inteligente, del fabricante AEON LABS apto para grandes cargas (heavy duty) de hasta 40 amperios.

Interruptor inteligente Z-Wave Plus (GEN5) Aeotec de AEON LABS para grandes cargas (heavy duty) es un módulo interruptor que va a permitir controlar aparatos o grupos de aparatos con cargas máximas de hasta 9600W. Podrá controlar a distancia o automáticamente mediante eventos o escenas domóticas predefinidas a través de una Unidad de Control Z-Wave.

Gracias a sus funcionalidades de supervisión de la energía y planificación podrá ahorrar en electricidad de forma inmediata. Podrá recibir reportes de consumo electrico en tiempo real, podrá planificar y preveer los picos de consumo, etc. gracias a sus funcionalidadesd de control y ahorro eléctricos, hasta un máximo de 40 amperios de intensidad electrica.

Interruptor inteligente Z-Wave Plus (GEN5) de AEON LABS dispone de la tecnología Gen5 de Aeotec, que sobrepasa las prestaciones de todo lo conocido hasta el momento en Z-Wave. Está construido conforme a la serie 500 de Z-Wave, ofreciendo mejoras en el rendimiento de radio del 50% y de una velocidad de comunicacion del 250% más rápido respecto a productos precedentes con tecnología Z-Wave.

Es necesario disponer de una Unidad de Control Z-Wave para poderlo integrar y controlar desde su red Z-Wave. Este módulo Z-Wave funciona como si fuera un repetidor sin cables con los demas dispositivos para favorecer el mallado de la red Z-Wave y aumentar cobertura en las estancias.

FUNCIONES :

  • Controlar a distancia un aparato o grupo de aparatos conectados a circuitos de fuerza
  • Función ON/OFF
  • Medición del consumo instantáneo y acumulado.
  • Funciona para cargas de hasta 40 amperios maximo
  • Fabricación basada en la gama Gen5 de Aeon Labs
  • Seguridad de la comunicacion vía radio mediante cifrado AES-128
  • Integra la tecnología Z-Wave de la serie 500
  • Comunicacion 250% más rapida comparada a dispositivos Z-Wave standard 
  • Suporta las tramas d e exploracion Z-Wave
  • Soporta Beaming 
  • Actualizaciones de firmware de forma inalámbrica: Over The Air (OTA)
  • Repetidor de mensajes Z-Wave 
  • Optimizacion de alcance de la antena hasta 150 metros
  • Facilidad de utilización y de instalación

 

CARACTERISTICAS TECNICAS :

  • Tipo de modulo: Receptor Z-Wave (Z-Wave Plus)
  • Alimentacion: 240VAC, 50/60Hz
  • Consumo: 1W
  • Carga maxima: 9600W / 40A
  • Frequencia : 868,42 Mhz
  • Distancia de transmision: 200 m en campo abierto
  • Protección IP: IP43
  • Dimensiones: 150mm x 118mm x 35mm
  • Peso: 350g
  • Temperatura de funcionamiento: 5-40°C
  • Humedad soportadapara funcionamiento: 80%
  • Certificaciones: FCC, UL, CE, ROHS
  • Fibaro HC Lite compatible Sí
  • Fibaro HC2 compatible Sí
  • Vera 3/Lite compatible Sí
  • ZIPABOX compatible Sí
  • eedomus compatible Sí
  • Domoticz compatible Sí

Información Ampliada Z-Wave (Inglés)

Nombre: Heavy Duty Smart Switch Gen5
Fabricante:Aeotec
Identificador:ZW078-C
Número de Certificación Z-Wave:ZC10-14090016
Plataforma Hardware:ZM5202
FLiRS:NO
Tipo de Role:Always On Slave
Descripción Corta:Heavy Duty Smart Switch Gen5 is an on/off switch module that also provides energy metering.
Descripción:Aeon Labs Heavy Duty Smart Switch is a Z-Wave device that can report the wattage energy usage and KWH usage to a Z-Wave Controller (especially a gateway), it can be controlled by other Z-Wave devices to turn on/off loads, it can bear up to 40A current of resister loads. It also acts as a repeater that forward Z-Wave command messages to destination nodes if the originating controller is out of range from the destination node. By taking advantage of the Z-Wave mesh network, commands can be routed to their destination via intermediary “listening” Z-Wave products. Products that are Z-Wave certified can be used and communicate with other Z-Wave certified devices.

Descargue el manual desde aquí.

Grupo
Max Nodos
Descripción
1
5
Group 1 is assigned to the Lifeline association group and every device has 5 nodes to associate. When the switch is turned on or off using the action button, the switch will send a basic report of its status to the nodes in association group 1. To change what kind of signal is sent to the nodes in group 1, please see the detailed description of configuration parameter 80.
2
5
When the product receives a controlling Basic Set CC/Switch Binary Set CC/ Scene Activation Set CC, which if cause the product’s load state to be changed, which will lead to send the Basic Set CC/Switch Binary Set CC /Scene Activation Set CC to nodes in group 2.
Número
Tamaño (Bytes)
Valor por Defecto
Nombre
Descripción
101
4
4
To set which report need to be sent.
This parameter is used to configure which reports need to be sent in Report Group 1. The values corresponding to the first four bits of the parameter value may be combined to create different combinations of reports that you wish to have sent. For example, instantaneous Current is the value 2 and instantaneous Watts is the value 4, so setting parameter 101 to a value of 6 will result in both instantaneous Current and instantaneous Watts to be reported. See the full description of the parameter values for other possible settings.
102
4
8
To set which report need to be sent.
This parameter is used to configure which reports need to be sent in Report Group 2. The values corresponding to the first four bits of the parameter value may be combined to create different combinations of reports that you wish to have sent. For example, instantaneous Current is the value 2 and instantaneous Watts is the value 4, so setting parameter 102 to a value of 6 will result in both instantaneous Current and instantaneous Watts to be reported. See the full description of the parameter values for other possible settings.
103
4
0
To set which report need to be sent.
This parameter is used to configure which reports need to be sent in Report Group 3. The values corresponding to the first four bits of the parameter value may be combined to create different combinations of reports that you wish to have sent. For example, instantaneous Current is the value 2 and instantaneous Watts is the value 4, so setting parameter 103 to a value of 6 will result in both instantaneous Current and instantaneous Watts to be reported. See the full description of the parameter values for other possible settings.
111
4
300
Set the interval time of sending report.
This parameter is used to set the interval time of sending report in Report Group 1. (The unit of time is second).
112
4
120
Set the interval time of sending report.
This parameter is used to set the interval time of sending report in Report Group 2. (The unit of time is second).
113
4
120
Set the interval time of sending report.
This parameter is used to set the interval time of sending report in Report Group 3. (The unit of time is second).
20
1
0
The load status after power on
This parameter is used for indicating the state of output load after re-power on.
200
1
0
Partner ID
This parameter is used to configure the partner ID. (0== Aeon Labs Standard Product, 1~255== others).
252
1
0
Enable/Disable Lock Configuration
This parameter is used to enable/disable Lock all configuration parameters. (0 =disable, 1 = enable)
255
4
0
Reset to default factory setting
This parameter is used to reset product to default factory setting. (There are just 2 values can be used).
3
1
0
Current Overload Protection
This parameter is used for the overload protection, which means the load will be disconnected after 5 seconds when the current more than 39.5A.
80
1
0
Enable/Disable to send notifications to associated devices to associated devices.
This parameter is used to Enable/Disable to send notifications to associated devices (in Group 1) when the state of Smart Switch Gen5’s load is changed. (0=Send nothing, 1=Send hail CC, 2=Send basic report CC).
90
1
1
Enable/Disable the function of parameter 91 and 92.
This parameter is used to Enable/Disable the function of parameter 91 and 92 (1=Enabled, 0=Disabled).
91
2
50
Induce an automatic report
This parameter is used to induce an automatic report when the change of the current power is more/less than the threshold in wattage.
92
1
10
Induce an automatic report
This parameter is used to induce an automatic report when the change of the current power is more/less than the threshold in percentage.
Basic
COMMAND_CLASS_BASIC
Hail
COMMAND_CLASS_HAIL
Scene Activation
COMMAND_CLASS_SCENE_ACTIVATION
Switch Binary
COMMAND_CLASS_SWITCH_BINARY
Inclusion
Turn the primary controller of Z-Wave network into inclusion mode, short press the product’s Action button that you can find on the product's housing.
Exclusion
Turn the primary controller of Z-Wave network into exclusion mode, short press the product’s Action button that you can find on the product's housing.
Learn Mode (adding another controller)
N/A
Factory Reset
Press and hold the Action button that you can find on the product's housing for 20 seconds and then release. This procedure should only be used when the primary controller is inoperable.
Device Wake-Up
N/A
Additional Special Features
Support ""Over the Air Firmware Updating"" and “Z-Wave Security”.

 

Opiniones

Escribe tu opinión

Interruptor Inteligente Aeotec Heavy Duty Smart Switch para alta carga con medida de consumo Z-Wave Plus (GEN5)

Interruptor Inteligente Aeotec Heavy Duty Smart Switch para alta carga con medida de consumo Z-Wave Plus (GEN5)

Interruptor inteligente Aeotec Heavy Duty Smart Switch Z-Wave Plus (GEN5) de AEON LABS para grandes cargas y alta potencia (heavy duty)

30 otros productos de la misma categoría:

Los clientes que compraron este producto también han comprado...