Productos más vistos





Confianza Online


HELTUN - Interruptor táctil Z-Wave+ 5 chanales (color Blanco)

HE211401

Nuevo

El interruptor de pared para panel táctil de 5 canales HELTUN sustituye a un interruptor de pared existente y permite los controles manuales o remotos (On/Off). Color blanco

Más detalles

Sin Stock

129,99 €

Características técnicas

Tecnología Z-Wave Plus

Descripción

ES SU COMODIDAD. TOMAR EL CONTROL DE LA MISMA.
El interruptor táctil de pared de 5 canales HELTUN sustituye a un interruptor de pared existente y permite el control manual o remoto de interruptores (on/off) para luces, persianas, motores y sistemas de calefacción con una carga máxima de 5A para cada canal.

Elegancia
Potente, eficiente y bien diseñado, HELTUN es el interruptor más delgado y elegante del mercado. Equipada con un vidrio cristalino, su carcasa de plástico reciclado resistente al fuego y al cortocircuito tiene un grosor de sólo 9 mm.

Diseño
HELTUN se adapta perfectamente a su diseño interior y está disponible en 24 combinaciones: 4 colores de marco (plata, cromo, negro y blanco) y 6 tipos de cristal (blanco, negro, amarillo, verde, rojo y azul), usted puede elegir cualquier estilo que se adapte a sus gustos.

Sensores internos
Los interruptores HELTUN también tienen sensores integrados de temperatura, humedad y luz.

Heltun Sensores y Tactil

Entradas y salidas
La entrada principal de energía es de 100-250VAC. El interruptor Heltun Switcher tiene 5 salidas de relé cada una con una carga máxima de 5A. También dispone de dos entradas independientes para canales de relé que le permiten controlar sistemas con diferentes fuentes de alimentación o utilizar las salidas como contactos secos. Por ejemplo, para encender/apagar la luz de 220VAC y controlar la válvula motorizada con una fuente de alimentación de 24VDC.

La entrada 1 con la fuente de alimentación necesaria es para los canales de relé 1, 2 y 3, que pueden cargarse hasta un máximo de 15A.

La entrada 2 con la fuente de alimentación necesaria es para los canales de relé 4 y 5, que pueden cargarse hasta un máximo de 10A.

Trasera conexiones interruptor tactil Heltun

Conozca su consumo de energía
Con el sistema de consumo de energía integrado en el interruptor HELTUN, usted puede monitorear con precisión la cantidad de energía utilizada durante un día, semana o mes en particular para cada canal. Simplemente especifique el consumo de carga en vatios para cada canal de relé y la lógica especial calculará el consumo total en relación con el tiempo transcurrido desde que la salida está en estado ON.

Funciones personalizadas
1) Cada botón táctil puede configurarse para controlar cualquier salida de relé. Se pueden controlar hasta cinco salidas de relé por cada botón.

2) 4 modos diferentes para cada control de relé: sólo ON, sólo OFF, invertir, mantener (cambiar a On cuando se pulsa el botón y cambiar a Off cuando se suelta el botón)

3) Las salidas de relé pueden ser controladas por temporizador: pulse el botón el relé se encenderá y después del tiempo especificado se apagará automáticamente. Esta función se puede utilizar para abrir/cerrar puertas de garaje, persianas, cortinas, etc.

4) Cada botón, luz de fondo y relé es completamente independiente. Son gestionados por el controlador principal o dispositivo asociado. En este estado, los botones pueden utilizarse para ejecutar escenarios y la retroiluminación puede indicar el modo o el estado del dispositivo.

Botones
El panel tiene 5 botones táctiles que son super sensibles y reaccionan incluso antes del contacto físico, de hecho el tratamiento se realiza a una distancia de 1-2mm. Cada botón tiene una luz de fondo de dos colores (rojo y azul).

Se pueden controlar manualmente 4 niveles de brillo diferentes de cada retroiluminación de color ajustando el valor en los ajustes o en el modo automático. El control automático de brillo ajusta de forma transparente el nivel de retroiluminación de las teclas a las condiciones de luz ambiental, lo que facilita su uso incluso en la oscuridad.

Interruptor tactil Heltun

Fácil de instalar
Las unidades HELTUN se pueden instalar fácilmente en cualquier soporte de pared estándar (rectangular o redondo). No se requieren habilidades especiales para la instalación.

Certificado Z-Wave Plus S2
Conecte sus dispositivos HELTUN al sistema de control domótico utilizando el último chip seguro Z-Wave Plus con el nuevo marco de trabajo Security 2 (S2) (método de encriptación AES 256 para la transferencia de datos).

El Switcher HELTUN es compatible con todos los controladores y dispositivos certificados por Z-WAVE.

Con el controlador Z-Wave, puede gestionar todas las funciones de los interruptores a través de una aplicación móvil, incluyendo la simulación de cada pulsación de botón, la visualización de gráficos precisos de consumo de energía y mucho más.

Además, se pueden conectar hasta 10 dispositivos separados al interruptor. Puede combinar cualquier relé compatible con Z-Wave con el interruptor Heltun y controlar cerraduras de puertas, válvulas, persianas, cortinas y otros sistemas motorizados.

FUNCIONES :

Interruptor táctil de 5 canales Z-Wave+
Inclusión/exclusión en una red Z-Wave
Control por asociación de 10 dispositivos en la red
Personalización de las funciones de las teclas táctiles
Activar sólo el relé
Desactivar sólo el relé
Invertir el estado del relé
Función Hold (Interruptor de botón pulsador)
Elección del canal de relé para cada botón
Se pueden controlar hasta 5 canales diferentes con un botón
Relé de salida controlado por tiempo
Configurar cada botón para controlar otro dispositivo del grupo de asociación
Colores de retroiluminación invertidos
Contador de consumo de energía para cada canal
Calibración de sensores de temperatura
Brillo de la pantalla LCD ajustable: automático o manual
Anulación del contador de consumo
Volver a los ajustes de fábrica
Función OTA (actualización de firmware Over The Air)
ESPECIFICACIONES TÉCNICAS

Dimensiones del marco frontal: 89x89x9mm
Dimensiones traseras: 53x53x28mm
Material: Plástico ignífugo, vidrio templado
Colores de la estructura: Blanco
Colores del vidrio: Blanco
5 botones táctiles capacitivos sensibles
Retroiluminación por LED rojo y azul para cada botón
4 niveles de brillo ajustables para la retroiluminación
Salida de relé de 5 canales, carga resistiva de hasta 5A cada uno
2 entradas independientes para el canal de relé
Temperatura de funcionamiento: -10 °C a +60 °C
Alimentación: 100V - 230VAC, 50Hz / 60Hz
Consumo de energía: 2 W
Carga resistiva máxima: 5A para cada canal
Vida útil del relé: 100.000 interruptores
Sensor de luz ambiental interna
Sensor de temperatura interno
Rango de medición: -40 °C a +125 °C
Precisión: ± 0,5 °C
Sensor de humedad interna
Rango de medición: 0 a 80% HR
Precisión: ± 3.0% RH
Contador de consumo de energía
Clase de protección: IP21
Frecuencia de onda Z: EU-868/869 MHz
SDK de Z-Wave: V6.71
Módulo Z-Wave Plus: ZM5202

Descargar

Heltun-Interruptor-MAN-EN

Manual Interruptor Táctil Z-Wave de Heltun

Descargar (1.91M)

Información Ampliada Z-Wave (Inglés)

Nombre: Touch Panel Switch Quinto
Fabricante:HELTUN
Identificador:HE-TPS05
Número de Certificación Z-Wave:ZC12-20040048
Plataforma Hardware:ZGM130
FLiRS:NO
Tipo de Role:Always On Slave
Descripción Corta:Advanced Programmable Z-Wave Plus v2 Wall Touch Panel Switch Quinto—with S2 security and SmartStart on the Z-Wave 700 platform.
Descripción:The HELTUN HE-TPS05 is an advanced programmable Z-Wave Plus v2 touch panel switch that controls many devices, including lights, dimmers, blinds, curtains, door locks, motorized valves, roller shutters, and more. Features: • Five-channel 5-amp relays with dry contact inputs • Five programmable touch buttons with two-color backlights • All buttons fully customizable to control one to five relays • Five modes configurable for each button • Each relay may be controlled by a timer or on a week schedule • Separate relays & backlights control from gateway or associated devices • Controls Scenes of gateway by touch buttons (pressed, held, released) • Built-in light, temperature, and humidity sensors • Power Consumption logic monitors energy usage • 20 association groups • Incorporates HELTUN Advanced Zero-Cross Technology • ‘Impossibly thin’ at only 9mm The HELTUN HE-TPS05 is part of an entire line of smart, connected products designed to provide the best technology has to offer without compromising stylish living.

Descargue el manual desde aquí.

Grupo
Max Nodos
Descripción
1
1
This is the Lifeline Group 1 which sends status (lifeline) reports to the primary controller.
2
1
Group 2 – “Touch 1 Basic Set”: is assigned to touch N1. Is used to send Basic Set ON (value 255) and Basic Set OFF (value 0) commands to the associated devices.
3
1
Group 3 – “Touch 1 Multilevel Set”: is assigned to touch N1. It sends MULTILEVEL SWITCH command class frame when touch N1 was held. Is used to send UP/DOWN command to the associated devices.
4
1
Group 4 – “Touch 2 Basic Set”: is assigned to touch N2. Is used to send Basic Set ON (value 255) and Basic Set OFF (value 0) commands to the associated devices.
5
1
Group 5 – “Touch 2 Multilevel Set”: is assigned to touch N2. It sends MULTILEVEL SWITCH command class frame when touch N1 was held. Is used to send UP/DOWN command to the associated devices.
6
1
Group 4 – “Touch 3 Basic Set”: is assigned to touch N3. Is used to send Basic Set ON (value 255) and Basic Set OFF (value 0) commands to the associated devices.
7
1
Group 7 – “Touch 3 Multilevel Set”: is assigned to touch N3. It sends MULTILEVEL SWITCH command class frame when touch N1 was held. Is used to send UP/DOWN command to the associated devices.
8
1
Group 8 – “Touch 4 Basic Set”: is assigned to touch N4. Is used to send Basic Set ON (value 255) and Basic Set OFF (value 0) commands to the associated devices.
9
1
Group 9 – “Touch 4 Multilevel Set”: is assigned to touch N4. It sends MULTILEVEL SWITCH command class frame when touch N1 was held. Is used to send UP/DOWN command to the associated devices.
10
1
Group 10 – “Touch 5 Basic Set”: is assigned to touch N5. Is used to send Basic Set ON (value 255) and Basic Set OFF (value 0) commands to the associated devices.
11
1
Group 11 – “Touch 5 Multilevel Set”: is assigned to touch N5. It sends MULTILEVEL SWITCH command class frame when touch N1 was held. Is used to send UP/DOWN command to the associated devices.
12
1
Group 12 – “LED 1 Basic Set”: is assigned to LED N1. Is used to send Basic Set ON (value 255) and Basic Set OFF (value 0) commands to the associated devices.
13
1
Group 13 – “LED 2 Basic Set”: is assigned to LED N2. Is used to send Basic Set ON (value 255) and Basic Set OFF (value 0) commands to the associated devices.
14
1
Group 14 – “LED 3 Basic Set”: is assigned to LED N3. Is used to send Basic Set ON (value 255) and Basic Set OFF (value 0) commands to the associated devices.
15
1
Group 14 – “LED 4 Basic Set”: is assigned to LED N4. Is used to send Basic Set ON (value 255) and Basic Set OFF (value 0) commands to the associated devices.
16
1
Group 16 – “LED 5 Basic Set”: is assigned to LED N5. Is used to send Basic Set ON (value 255) and Basic Set OFF (value 0) commands to the associated devices.
17
1
Group 17 – “Relay 1 Basic Set”: is assigned to relay N1. Is used to send Basic Set ON (value 255) and Basic Set OFF (value 0) commands to the associated devices.
18
1
Group 18 – “Relay 2 Basic Set”: is assigned to relay N2. Is used to send Basic Set ON (value 255) and Basic Set OFF (value 0) commands to the associated devices.
19
1
Group 19 – “Relay 3 Basic Set”: is assigned to relay N3. Is used to send Basic Set ON (value 255) and Basic Set OFF (value 0) commands to the associated devices.
20
1
Group 20 – “Relay 4 Basic Set”: is assigned to relay N4. Is used to send Basic Set ON (value 255) and Basic Set OFF (value 0) commands to the associated devices.
21
1
Group 21 – “Relay 5 Basic Set”: is assigned to relay N5. Is used to send Basic Set ON (value 255) and Basic Set OFF (value 0) commands to the associated devices.
Número
Tamaño (Bytes)
Valor por Defecto
Nombre
Descripción
1
1
1
TIME CORRECTION
Time correction by controller
10
1
15
TOUCH SENSITIVITY
Touch buttons sensitivity: 10=Supper sensitive. 50=lowest sensitivity.
11
1
0
TEMP SENSOR CORRECTION
Temperature sensor calibration, x10
12
1
1
BACKLIGHT ACTIVE COLOR
Active state backlight color
13
1
1
BACKLIGHT AUTO BRIGHTNESS
Backlight auto-brightness control
14
1
10
BACKLIGHT MANUAL BRIGHTNESS LEVEL
Backlight brightness in manual mode. The Backlight Brightness Level Parameter will take effect when Parameter 13 is set to Manual Control (value = 0).
15
1
1
BACKLIGHT1 CONTROL SOURCE
Backlight 1 control source
16
1
1
BACKLIGHT2 CONTROL SOURCE
Backlight 2 control source
17
1
1
BACKLIGHT3 CONTROL SOURCE
Backlight 3 control source
18
1
1
BACKLIGHT4 CONTROL SOURCE
Backlight 4 control source
19
1
1
BACKLIGHT5 CONTROL SOURCE
Backlight 5 control source
2
1
1
WEEKDAY
The day of the week (starting from Monday)
20
1
1
RELAY1 CONTROL SOURCE
Relay 1 control source
21
1
2
RELAY2 CONTROL SOURCE
Relay 2 control source
22
1
3
RELAY3 CONTROL SOURCE
Relay 3 control source
23
1
4
RELAY4 CONTROL SOURCE
Relay 4 control source
24
1
5
RELAY5 CONTROL SOURCE
Relay 5 control source
25
1
1
HOLD1 CONTROL MODE
Hold control mode for touch button 1
26
1
1
HOLD2 CONTROL MODE
Hold control mode for touch button 2
27
1
1
HOLD3 CONTROL MODE
Hold control mode for touch button 3
28
1
1
HOLD4 CONTROL MODE
Hold control mode for touch button 4
29
1
1
HOLD5 CONTROL MODE
Hold control mode for touch button 5
3
1
0
HOUR
Time Hour
30
1
1
CLICK1 CONTROL MODE
Click control mode for touch button 1
31
1
1
CLICK2 CONTROL MODE
Click control mode for touch button 2
32
1
1
CLICK3 CONTROL MODE
Click control mode for touch button 3
33
1
1
CLICK4 CONTROL MODE
Click control mode for touch button 4
34
1
1
CLICK5 CONTROL MODE
Click control mode for touch button 5
35
2
0
RELAY1 TIMER DURATION
Timer mode duration for button 1. This parameter specifies the duration in seconds for the Timer mode (value 5 or 6 in Parameters 30). Press the button and the relay output goes to ON/OFF for the specified time then changes back to OFF/ON. This function can be used to open/close garage doors, blinds, curtains, etc. or to turn attached devices like security OFF for a short time. The time values can be configured from 0 to 43200 sec (12 hours). Note: If the parameter value is set to “0” it will operate as a short contact (about 0.5 sec).
36
2
0
RELAY2 TIMER DURATION
Timer mode duration for button 2. This parameter specifies the duration in seconds for the Timer mode (value 5 or 6 in Parameters 31). Press the button and the relay output goes to ON/OFF for the specified time then changes back to OFF/ON. This function can be used to open/close garage doors, blinds, curtains, etc. or to turn attached devices like security OFF for a short time. The time values can be configured from 0 to 43200 sec (12 hours). Note: If the parameter value is set to “0” it will operate as a short contact (about 0.5 sec).
37
2
0
RELAY3 TIMER DURATION
Timer mode duration for button 3. This parameter specifies the duration in seconds for the Timer mode (value 5 or 6 in Parameters 32). Press the button and the relay output goes to ON/OFF for the specified time then changes back to OFF/ON. This function can be used to open/close garage doors, blinds, curtains, etc. or to turn attached devices like security OFF for a short time. The time values can be configured from 0 to 43200 sec (12 hours). Note: If the parameter value is set to “0” it will operate as a short contact (about 0.5 sec).
38
2
0
RELAY4 TIMER DURATION
Timer mode duration for button 4. This parameter specifies the duration in seconds for the Timer mode (value 5 or 6 in Parameters 33). Press the button and the relay output goes to ON/OFF for the specified time then changes back to OFF/ON. This function can be used to open/close garage doors, blinds, curtains, etc. or to turn attached devices like security OFF for a short time. The time values can be configured from 0 to 43200 sec (12 hours). Note: If the parameter value is set to “0” it will operate as a short contact (about 0.5 sec).
39
2
0
RELAY5 TIMER DURATION
Timer mode duration for button 5. This parameter specifies the duration in seconds for the Timer mode (value 5 or 6 in Parameters 34). Press the button and the relay output goes to ON/OFF for the specified time then changes back to OFF/ON. This function can be used to open/close garage doors, blinds, curtains, etc. or to turn attached devices like security OFF for a short time. The time values can be configured from 0 to 43200 sec (12 hours). Note: If the parameter value is set to “0” it will operate as a short contact (about 0.5 sec).
4
1
0
MINUTE
Time Minute
40
1
0
RELAY INVERSE GROUP1
Group 1 relay inverse mode. The valid values are the following: 0, 12, 13, 14, 15, 21, 23, 24, 25, 31, 32, 34, 35, 41, 42, 43, 45, 51, 52, 53, 54
41
1
0
RELAY INVERSE GROUP2
Group 2 relay inverse mode. The valid values are the following: 0, 12, 13, 14, 15, 21, 23, 24, 25, 31, 32, 34, 35, 41, 42, 43, 45, 51, 52, 53, 54
42
4
0
RELAY CONTROL SCENARIO1
Relays control by sensors Group 1 0, 10000000 … 53112359 Encoded as 8 digit value (ABCDEFGH): A: Relay number (1.. 5) B: Control Mode (0-Temperature Sensor, 1-Humidity Sensor, 2-Light Sensor, 3-Time control) C: State change condition relative to the value in HGFE Value field ( 0-Lower than, 1-Higher than) D: State Change, 0- Switch OFF, 1- Switch ON EFGH: Condition Value Sensor Value for Control modes 0-2 Time Of Day for Control mode 3. EF represents Hour (0..23), GH represents Minutes (0..59)
43
4
0
RELAY CONTROL SCENARIO2
Relays control by sensors Group 2 0, 10000000 … 53112359 Encoded as 8 digit value (ABCDEFGH): A: Relay number (1.. 5) B: Control Mode (0-Temperature Sensor, 1-Humidity Sensor, 2-Light Sensor, 3-Time control) C: State change condition relative to the value in HGFE Value field ( 0-Lower than, 1-Higher than) D: State Change, 0- Switch OFF, 1- Switch ON EFGH: Condition Value Sensor Value for Control modes 0-2 Time Of Day for Control mode 3. EF represents Hour (0..23), GH represents Minutes (0..59)
44
4
0
RELAY CONTROL SCENARIO3
Relays control by sensors Group 3 0, 10000000 … 53112359 Encoded as 8 digit value (ABCDEFGH): A: Relay number (1.. 5) B: Control Mode (0-Temperature Sensor, 1-Humidity Sensor, 2-Light Sensor, 3-Time control) C: State change condition relative to the value in HGFE Value field ( 0-Lower than, 1-Higher than) D: State Change, 0- Switch OFF, 1- Switch ON EFGH: Condition Value Sensor Value for Control modes 0-2 Time Of Day for Control mode 3. EF represents Hour (0..23), GH represents Minutes (0..59)
45
4
0
RELAY CONTROL SCENARIO4
Relays control by sensors Group 4 0, 10000000 … 53112359 Encoded as 8 digit value (ABCDEFGH): A: Relay number (1.. 5) B: Control Mode (0-Temperature Sensor, 1-Humidity Sensor, 2-Light Sensor, 3-Time control) C: State change condition relative to the value in HGFE Value field ( 0-Lower than, 1-Higher than) D: State Change, 0- Switch OFF, 1- Switch ON EFGH: Condition Value Sensor Value for Control modes 0-2 Time Of Day for Control mode 3. EF represents Hour (0..23), GH represents Minutes (0..59)
46
4
0
RELAY CONTROL SCENARIO5
Relays control by sensors Group 5 0, 10000000 … 53112359 Encoded as 8 digit value (ABCDEFGH): A: Relay number (1.. 5) B: Control Mode (0-Temperature Sensor, 1-Humidity Sensor, 2-Light Sensor, 3-Time control) C: State change condition relative to the value in HGFE Value field ( 0-Lower than, 1-Higher than) D: State Change, 0- Switch OFF, 1- Switch ON EFGH: Condition Value Sensor Value for Control modes 0-2 Time Of Day for Control mode 3. EF represents Hour (0..23), GH represents Minutes (0..59)
47
4
0
RELAY CONTROL SCENARIO6
Relays control by sensors Group 6 0, 10000000 … 53112359 Encoded as 8 digit value (ABCDEFGH): A: Relay number (1.. 5) B: Control Mode (0-Temperature Sensor, 1-Humidity Sensor, 2-Light Sensor, 3-Time control) C: State change condition relative to the value in HGFE Value field ( 0-Lower than, 1-Higher than) D: State Change, 0- Switch OFF, 1- Switch ON EFGH: Condition Value Sensor Value for Control modes 0-2 Time Of Day for Control mode 3. EF represents Hour (0..23), GH represents Minutes (0..59)
48
4
0
RELAY CONTROL SCENARIO7
Relays control by sensors Group 7. 0, 10000000 … 53112359 Encoded as 8 digit value (ABCDEFGH): A: Relay number (1.. 5) B: Control Mode (0-Temperature Sensor, 1-Humidity Sensor, 2-Light Sensor, 3-Time control) C: State change condition relative to the value in HGFE Value field ( 0-Lower than, 1-Higher than) D: State Change, 0- Switch OFF, 1- Switch ON EFGH: Condition Value Sensor Value for Control modes 0-2 Time Of Day for Control mode 3. EF represents Hour (0..23), GH represents Minutes (0..59)
49
4
0
RELAY CONTROL SCENARIO8
Relays control by sensors Group 8 0, 10000000 … 53112359 Encoded as 8 digit value (ABCDEFGH): A: Relay number (1.. 5) B: Control Mode (0-Temperature Sensor, 1-Humidity Sensor, 2-Light Sensor, 3-Time control) C: State change condition relative to the value in HGFE Value field ( 0-Lower than, 1-Higher than) D: State Change, 0- Switch OFF, 1- Switch ON EFGH: Condition Value Sensor Value for Control modes 0-2 Time Of Day for Control mode 3. EF represents Hour (0..23), GH represents Minutes (0..59)
5
1
10
METER REPORT INTERVAL
Energy Consumption Meter Consecutive Report Interval, minutes
50
4
0
RELAY CONTROL SCENARIO9
Relays control by sensors Group 9 0, 10000000 … 53112359 Encoded as 8 digit value (ABCDEFGH): A: Relay number (1.. 5) B: Control Mode (0-Temperature Sensor, 1-Humidity Sensor, 2-Light Sensor, 3-Time control) C: State change condition relative to the value in HGFE Value field ( 0-Lower than, 1-Higher than) D: State Change, 0- Switch OFF, 1- Switch ON EFGH: Condition Value Sensor Value for Control modes 0-2 Time Of Day for Control mode 3. EF represents Hour (0..23), GH represents Minutes (0..59)
51
4
0
RELAY CONTROL SCENARIO10
Relays control by sensors Group 10 0, 10000000 … 53112359 Encoded as 8 digit value (ABCDEFGH): A: Relay number (1.. 5) B: Control Mode (0-Temperature Sensor, 1-Humidity Sensor, 2-Light Sensor, 3-Time control) C: State change condition relative to the value in HGFE Value field ( 0-Lower than, 1-Higher than) D: State Change, 0- Switch OFF, 1- Switch ON EFGH: Condition Value Sensor Value for Control modes 0-2 Time Of Day for Control mode 3. EF represents Hour (0..23), GH represents Minutes (0..59)
52
2
0
RELAY1 LOAD POWER
Power load consumption (in Watts) Relay channel 1 in order to calculate total energy consumption relative to the time each relay is ON.
53
2
0
RELAY2 LOAD POWER
Power load consumption (in Watts) Relay channel 2 in order to calculate total energy consumption relative to the time each relay is ON.
54
2
0
RELAY3 LOAD POWER
Power load consumption (in Watts) Relay channel 3 in order to calculate total energy consumption relative to the time each relay is ON.
55
2
0
RELAY4 LOAD POWER
Power load consumption (in Watts) Relay channel 4 in order to calculate total energy consumption relative to the time each relay is ON.
56
2
0
RELAY5 LOAD POWER
Power load consumption (in Watts) Relay channel 5 in order to calculate total energy consumption relative to the time each relay is ON.
57
1
0
TOUCH1 ASSOCIATION MODE
Touch control mode for associations with touch button 1. This parameter is intended for use when Multilevel Switch Group Associations (Groups 3, 5, 7, 9, & 11) have been activated. Defines the logic of values changing if one the touch button has been held for more than one second.
58
1
0
TOUCH2 ASSOCIATION MODE
Touch control mode for associations with touch button 2. This parameter is intended for use when Multilevel Switch Group Associations (Groups 3, 5, 7, 9, & 11) have been activated. Defines the logic of values changing if one the touch button has been held for more than one second.
59
1
0
TOUCH3 ASSOCIATION MODE
Touch control mode for associations with touch button 3. This parameter is intended for use when Multilevel Switch Group Associations (Groups 3, 5, 7, 9, & 11) have been activated. Defines the logic of values changing if one the touch button has been held for more than one second.
6
1
10
SENSORS REPORT INTERVAL
Sensors Consecutive Report Interval
60
1
0
TOUCH4 ASSOCIATION MODE
Touch control mode for associations with touch button 4. This parameter is intended for use when Multilevel Switch Group Associations (Groups 3, 5, 7, 9, & 11) have been activated. Defines the logic of values changing if one the touch button has been held for more than one second.
61
1
0
TOUCH5 ASSOCIATION MODE
Touch control mode for associations with touch button 5. This parameter is intended for use when Multilevel Switch Group Associations (Groups 3, 5, 7, 9, & 11) have been activated. Defines the logic of values changing if one the touch button has been held for more than one second.
7
1
5
TEMPERATURE REPORT THRESHOLD
Temperature difference to send to controller, value X 10
8
1
2
HUMIDITY REPORT THRESHOLD
Humidity difference to send to controller, value X 10
9
1
50
LIGHT REPORT THRESHOLD
Luminance difference to send to controller in %
Application Status
COMMAND_CLASS_APPLICATION_STATUS
Association Group Information V3
COMMAND_CLASS_ASSOCIATION_GRP_INFO_V3
Association V2
COMMAND_CLASS_ASSOCIATION_V2
Basic V2
COMMAND_CLASS_BASIC_V2
Central Scene V3
COMMAND_CLASS_CENTRAL_SCENE_V3
Clock
COMMAND_CLASS_CLOCK
Configuration V4
COMMAND_CLASS_CONFIGURATION_V4
Device Reset Locally
COMMAND_CLASS_DEVICE_RESET_LOCALLY
Firmware Update Meta-Data V5
COMMAND_CLASS_FIRMWARE_UPDATE_MD_V5
Indicator V3
COMMAND_CLASS_INDICATOR_V3
Manufacturer Specific V2
COMMAND_CLASS_MANUFACTURER_SPECIFIC_V2
Meter V5
COMMAND_CLASS_METER_V5
Multi-Channel Association V3
COMMAND_CLASS_MULTI_CHANNEL_ASSOCIATION_V3
Multi-Channel V4
COMMAND_CLASS_MULTI_CHANNEL_V4
Powerlevel
COMMAND_CLASS_POWERLEVEL
Security S0
COMMAND_CLASS_SECURITY
Security S2
COMMAND_CLASS_SECURITY_2
Sensor Multilevel V11
COMMAND_CLASS_SENSOR_MULTILEVEL_V11
Supervision
COMMAND_CLASS_SUPERVISION
Switch Binary V2
COMMAND_CLASS_SWITCH_BINARY_V2
Transport Service V2
COMMAND_CLASS_TRANSPORT_SERVICE_V2
Version V3
COMMAND_CLASS_VERSION_V3
Z-Wave Plus Info V2
COMMAND_CLASS_ZWAVEPLUS_INFO_V2
Where to find S2 DSK on product
The device DSK and QR code are printed on the HE-TPS05 back panel plus on the additional Security Card included in the HE- TPS05 packaging.
Classic Inclusion
To add the HE-TPS05 to a Z-Wave Network (i.e. “inclusion”), do the following:

1. Start the inclusion mode from the gateway/controller.

2. To start the inclusion process on the HE-TPS05, simultaneously press the two bottom touch buttons and hold them for three seconds.

3. The two upper buttons will then sequentially blink ‘blue-red’.

4. If the inclusion has been successful, the two upper buttons will turn blue for three seconds.

5. If the inclusion was not successful, the two upper buttons will turn red for three seconds. In that case repeat the inclusion process.
Classic Exclusion
To remove the HE-TPS05 from a Z-Wave Network (i.e. “exclusion”), do the following:

1. Start the exclusion mode from the gateway/controller.

2. To start the exclusion process on the HE-TPS05, simultaneously press the two bottom touch buttons and hold them for three seconds.

3. Two upper buttons will sequentially blink blue-red.

4. If the exclusion has been successful, the two upper buttons will turn red for three seconds.

5. If the exclusion was not successful, the two upper buttons will turn blue for three seconds. In that case repeat the exclusion process.

Factory Reset Procedure
To reset the HE-TPS05 to factory defaults, simultaneously press the two bottom buttons and single central touch button, and hold all three for five seconds. If successful, the two upper buttons will turn blue for three seconds then the device will restart.

NOTE: This factory reset procedure will change all parameters to the original factory default values and will also exclude the device from any associated Z-Wave network.

Please use Factory Reset only when the primary network controller is missing or otherwise inoperable.
S2 Authenticated
S2_AUTHENTICATED
S2 Unauthenticated
S2_UNAUTHENTICATED
Neutral Wire Required
For electric in-wall/wired switches, indicate whether a neutral wire is required for installation.
Z-Wave Scene Type
Indicates which of the two types of Z-Wave scene command classes are supported. Scenes or Central Scene
Switch Type
Describes the type of operator for a switch.
Firmware Updatable
Indicates whether the firmware can be updated and whether it is done by the consumer or a technician.
Switch Load Capacity Current
The amount of switch load energy the product is rated for in Amps

 

Opiniones

Escribe tu opinión

HELTUN - Interruptor táctil Z-Wave+ 5 chanales (color Blanco)

HELTUN - Interruptor táctil Z-Wave+ 5 chanales (color Blanco)

El interruptor de pared para panel táctil de 5 canales HELTUN sustituye a un interruptor de pared existente y permite los controles manuales o remotos (On/Off). Color blanco

15 otros productos de la misma categoría: