Productos más vistos





Confianza Online


domoticalia.es/es/ Reviews with ekomi.es

PHILIO - Mando a distancia de 5 botones Z-Wave Plus

ZIP-PSR03

Nuevo

Controle hasta ocho luces, persianas o equipos/electrodomésticos/aparatos de forma remota conectando este mando a distancia para red Z-Wave y Z-Wave Plus. Recargable a traves de conexion micro USB

Más detalles

En Stock - Envío inmediato

59,00 €

Características técnicas

Tecnología Z-Wave Plus

Descripción

El control remoto PHILIO con 5 botones le permite controlar hasta 8 dispositivos, luces o grupos en su red Z-Wave. Está equipado con el último conjunto de chips de la serie Z-Wave Plus 500 y, por lo tanto, se beneficia de todas las funciones más recientes proporcionadas por esta versión Z-Wave.

También es posible a través de una pasarela Z-Wave / IR controlar dispositivos multimedia, por ejemplo.

Es necesario un controlador Z-Wave (control remoto, dongle, controlador de domótica, ...) para integrar este detector en su red si ya tiene una red existente.

FUNCIONES:

Control mediante el comando básico de ENCENDIDO / APAGADO
Controle el equipo AV a través de un convertidor Z-Wave / IR
Chip Z-Wave serie 500 para operación multicanal y velocidades de datos más altas (9.6 / 40 / 100kbps)
Batería de litio recargable en el puerto micro USB
Actualización de firmware OTA
impermeable


CARACTERÍSTICAS TÉCNICAS:

Tipo de módulo: Transmisor Z-Wave Plus (868,42 MHz)
Fuente de alimentación: batería de litio recargable
Voltaje de funcionamiento: 3.7V
Corriente de funcionamiento: 40mA
Temperatura de funcionamiento: -10 ° C - 40 ° C
Distancia de transmisión: 30m en interiores
Dimensiones: 35 x 80 x 7 mm
Peso: 28g
Normas: EMC 2004/108 / CE, R & TTE 1995/5 / EC, LVD 2006/95 / EC, FCC Parte 15

Información Ampliada Z-Wave (Inglés)

Nombre: Keyfob 5 Remote, Z-Wave
Fabricante:Zipato
Identificador:ph-psr03.eu
Número de Certificación Z-Wave:ZC10-17065643
Plataforma Hardware:SD3502
FLiRS:NO
Tipo de Role:Portable Slave
Descripción Corta:Zipato Z-Wave Remote is a simple controller for controlling AV device through Z-Wave-to-IR extender, and it can also control 8 ON/OFF lighting groups via basic set, based on Z-Wave technology.
Descripción:Zipato Z-Wave Remote is a simple controller for controlling AV device through Z-Wave-to-IR extender, and it can also control 8 ON/OFF lighting groups via basic set, based on Z-Wave technology. It is the Z-Wave plus product, it support the security, OTA... all the newest features of the Z-Wave technology.

Descargue el manual desde aquí.

Grupo
Max Nodos
Descripción
1
4
Z-Wave Plus Lifeline
2
4
Lighting group control
3
4
Lighting group control
4
4
Lighting group control
5
4
Lighting group control
6
4
Lighting group control
7
4
Lighting group control
8
4
Lighting group control
9
4
Lighting group control
Número
Tamaño (Bytes)
Valor por Defecto
Nombre
Descripción
10
1
12
Auto Report Battery Time
The interval time for auto report the battery level.
2
1
-1
Basic Set Level
Setting the BASIC command value to turn on the light. The xFF(-1) means turn on the light. For dimmer equipment 1 to 100 means the light strength. 0 means turn off the light.
7
1
0
Customer Function
Customer function switch, using bit control.
82
1
0
Association Group 2 Basic Set Level
Setting the BASIC command value to turn on the light in the association group 2.
83
1
0
Association Group 3 Basic Set Level
Setting the BASIC command value to turn on the light in the association group 3.
84
1
0
Association Group 4 Basic Set Level
Setting the BASIC command value to turn on the light in the association group 4.
85
1
0
Association Group 5 Basic Set Level
Setting the BASIC command value to turn on the light in the association group 5.
86
1
0
Association Group 6 Basic Set Level
Setting the BASIC command value to turn on the light in the association group 6.
87
1
0
Association Group 7 Basic Set Level
Setting the BASIC command value to turn on the light in the association group 7.
88
1
0
Association Group 8 Basic Set Level
Setting the BASIC command value to turn on the light in the association group 8.
89
1
0
Association Group 9 Basic Set Level
Setting the BASIC command value to turn on the light in the association group 9.
Basic
COMMAND_CLASS_BASIC
Simple AV Control
COMMAND_CLASS_SIMPLE_AV_CONTROL
Association Group Info
COMMAND_CLASS_ASSOCIATION_GRP_INFO
Association V2
COMMAND_CLASS_ASSOCIATION_V2
Battery
COMMAND_CLASS_BATTERY
Configuration
COMMAND_CLASS_CONFIGURATION
Device Reset Locally
COMMAND_CLASS_DEVICE_RESET_LOCALLY
Firmware Update Meta-Data V2
COMMAND_CLASS_FIRMWARE_UPDATE_MD_V2
Manufacturer Specific V2
COMMAND_CLASS_MANUFACTURER_SPECIFIC_V2
Notification V4
COMMAND_CLASS_NOTIFICATION_V4
Powerlevel
COMMAND_CLASS_POWERLEVEL
Security S0
COMMAND_CLASS_SECURITY
Version V2
COMMAND_CLASS_VERSION_V2
Wake Up V2
COMMAND_CLASS_WAKE_UP_V2
Z-Wave Plus Info V2
COMMAND_CLASS_ZWAVEPLUS_INFO_V2
Device Wake-Up
After the device is added to the network, it will wake-up once per

day in default. When it wakes up it will broadcast the “Wake Up

Notification” message to the network, and wake-up 10 seconds to

receive the setting commands. To wake-up the device immediately,

please hold down the central key, then press the top-right key once

within. The device will wake-up for 10 seconds.
Controller Exclusion
Put the Z-Wave Controller in exclusion mode. Hold down the central key, then press the top-right key 3 times within 1.5 seconds to enter exclusion mode. Node ID has been excluded.
Controller Inclusion
Put the Z-Wave Controller in inclusion mode. Hold down the central key, then press the top-right key 3 times within 1.5 seconds to enter inclusion mode. After successful inclusion, the device will wake to receive the setting command from Z-Wave Controller in about 20 seconds.
Factory Reset
Use this procedure only in the event that the primary controller is lost or otherwise inoperable.

Hold down the central key, then press the top-right key 4 times

within 1.5 seconds and during 4th press, hold the key until LED

lights up.

After 3 seconds the LED will turn OFF, and after next 2 seconds,

release the tamper key. If successful, the LED will light ON for

second. Otherwise, the LED will flash once. IDs are excluded and all settings will reset to factory default.
Battery Type
Enter the type (e.g. AA, CR2032, AAA) of the battery/batteries that the product uses.
Battery Quantity
Enter the number of batteries of the designated type that the product uses.
Supported Notification Types
Select the Notification Types that the product handles (controllers), or sends (slaves).

 

Opiniones

Escribe tu opinión

PHILIO - Mando a distancia de 5 botones Z-Wave Plus

PHILIO - Mando a distancia de 5 botones Z-Wave Plus

Controle hasta ocho luces, persianas o equipos/electrodomésticos/aparatos de forma remota conectando este mando a distancia para red Z-Wave y Z-Wave Plus. Recargable a traves de conexion micro USB

18 otros productos de la misma categoría:

Los clientes que compraron este producto también han comprado...