Productos más vistos





Confianza Online


domoticalia.es/es/ Reviews with ekomi.es

Sensor PIR Z-Wave Plus - Gen5 de Vision

VISEZP3102-5

Nuevo

Sensor de movimiento tecnología Z-Wave Plus (receptor infrarrojo pasivo -> PIR) permite detectar la presencia de una persona en una habitacion o estancia y en base a esto realizart acciones domóticas

Más detalles

En Stock - Envío inmediato

46,49 €

Características técnicas

Tecnología Z-Wave Plus

Descripción

Este sensor de movimiento Z-Wave Plus de Vision (PIR = passive infrared receiver) detecta presencia en las estancias donde se ubique. La unidad envía información a una Unidad de Control Z-Wave o a otro dispositivo Z-Wave asociado. Hasta 4 dispositivos pueden ser controlados desde este dispositivo. Además de ser un sensor de movimiento, dispone también de la función de sensor de temperatura. Se puede instalar mediante tornillos o cinta de doble cara. El dispositivo está operado por baterias y permanece en modo "dormido" hasta que se detecta una acción. Después de un tiempo programable de inactividad, el dispositivo se despierta y envia una señal de estado. Después la unidad vuelve a su estado de "letargo". Las baterias se pueden reemplazar sin necesidad de desatornillar. La unidad ofrece una alerta visual en el dispositivo y envia una alerta a la Unidad de Control ZWave cuando se necesita cambiar la batería. Un interruptor tipo "tamper" protege al dispositivio para su uso en entornos de seguridad, para protegerlo de de manipulaciones y sabotajes. Las baterias CR123 de Litio duran entre 3 y 5 años en condiciones de uso normales. El dispositivo soporta inclusion normal Z-Wave, auto inclusion e inclusion de red, según convenga. Este dispositivo cumple la certificacion Z-Wave Plus (GEN5).

Se incluyen baterias, cinta adhesiva y manual de instrucciones.

Nota: Cuando es usado con VERA, el sensor de temperatura no aparece disponible como un ícono separado. Esto implica que tiene que ser utilizado código LUA para acceder y utilizar el valor de temperatura.

Información Ampliada Z-Wave (Inglés)

Nombre: Motion Detector (with Temperature Sensor)
Fabricante:Vision
Identificador:ZP3102EU-5
Número de Certificación Z-Wave:ZC10-14100005
Plataforma Hardware:ZM5202
FLiRS:NO
Tipo de Role:Reporting Sleeping Slave
Descripción Corta:The ZP3102 is a Z-Wave enabled motion detector and temperature sensor.
Descripción:The ZP3102 is a Z-Wave enabled motion detector and temperature sensor. The motion detector has 120 degrees of horizontal visibility and 60 degrees of vertical visibility. The temperature sensor that is built in to the ZP3102 is capable of reporting in both Celsius and Fahrenheit scales, and may be queried for the temperature and it will report it automatically when it detects changes. The sensor is battery operated and includes the ability to report the battery level and will transmit an alert signal if the battery assumes a critically low level. The ZP3102 is future-proofed by also supporting the ability to have its firmware updated over the Z-Wave network.

Descargue el manual desde aquí.

Grupo
Max Nodos
Descripción
1
5
Z-Wave Plus Lifeline
Número
Tamaño (Bytes)
Valor por Defecto
Nombre
Descripción
1
1
3
Retriggering Time
User could set up the retriggering time from 1 ~ 255 minutes using values 0x00 to 0xFF (-128 to 127).
2
1
0
Temperature Scale
User could choose the temperature reported scale by following: 0x00 - Celsius 0x01 - Fahrenheit
3
1
4
Infrared sensor sensitivity
Infrared sensor sensitivity adjustment: 1 = most sensitive 7 = most insensitive
Basic
COMMAND_CLASS_BASIC
Exclusion
Put the Z-Wave Interface Controller into “exclusion” mode, and following its instruction to delete the ZP3102 to your Z-Wave network. Press the Program Switch of ZP3102 once to be excluded. The LED on the ZP3102 should start to flash.
Inclusion
Put the Z-Wave Interface Controller into 'inclusion' mode, and follow its instructions to add the ZP3102 to your Z-Wave network. For a successful inclusion, it is suggested to have the sensor and your Z-Wave controller about one meter apart. Press the Program Switch of the ZP3102 (refer to the manual for the location of the program switch) ready the ZP3102 for inclusion into the Z-Wave network. If inclusion does not take place or is unsuccessful within 20 seconds, the ZP3102 will go to sleep; if this happens, simply repeat pressing the program switch to try again.
Device Wake-Up
Remove the rear cover to wake up the device, or set the wake up interval time from 10 minutes to 1 week. The battery will be drained quickly if you fail to replace the cover after using that method to wake up the device.
Factory Reset
Removing the rear cover to wake up the device. Press Program Switch 10 times within 10 seconds, ZP3102 will go back to factory default. (This is to be used only in the case of the primary controller being inoperable or otherwise unavailable.)

 

Opiniones

grado 
26/11/2017

Sensor PIR

Como sensor de movimiento funciona bien, pero como sensor de temperatura es poco preciso va en escalones de unos 2 grados.

  • 1 de 1 personas encontraron esta crítica útil.

¡Escriba su opinión!

Escribe tu opinión

Sensor PIR Z-Wave Plus - Gen5 de Vision

Sensor PIR Z-Wave Plus - Gen5 de Vision

Sensor de movimiento tecnología Z-Wave Plus (receptor infrarrojo pasivo -> PIR) permite detectar la presencia de una persona en una habitacion o estancia y en base a esto realizart acciones domóticas

Los clientes que compraron este producto también han comprado...