Productos más vistos





Confianza Online


domoticalia.es/es/ Reviews with ekomi.es

Nice Yubii Home - Controlador domótico Z-Wave Plus v2 (Serie 700) y radio Nice-Elero

YH-001

Nuevo

Controlador domótico híbrido Z-Wave Plus v.2 (Serie 700) y radiofrecuencia Nice / elero.

Más detalles

En Stock - Envío inmediato

162,13 €

Características técnicas

Tecnología Z-Wave Serie 700

Descripción

Yubii Home, your life gets better Toda tu casa encerrada en un único dispositivo: imparte un simple comando para controlar luces, persianas, cancelas, puertas y ventanas, electrodomésticos, sistemas de calefacción y riego, dispositivos multimedia, y detecta fugas de agua, monóxido de carbono e incendios.

Sostenibilidad y ahorro Yubii Home garantiza un impacto medioambiental mínimo para tu casa inteligente. Reduce el consumo energético y las facturas de la calefacción con el control inteligente de la calefacción y la iluminación y la monitorización de las cargas eléctricas. Imagínate escenarios infinitos Una casa inteligente fomenta la sensación de confort y facilita las actividades diarias. Escenarios automatizados, control de voz y con smartphones, tablets y relojes inteligentes, todo ello facilitará tu rutina diaria.

Yubii, un auténtico ecosistema multifunción para tu casa inteligente Es compatible con más de 3000 dispositivos de otras marcas.

Yubii Home se integra con los dispositivos de terceros mediante los protocolos Z-Wave y WiFi, puede soportar una cámara IP y hasta 5 dispositivos utilizando los plug-in de la app

Gestiona tu casa como quieras Con la app Yubii, mantienes tu casa bajo control y gestionas los automatismos en todas partes.

Información Ampliada Z-Wave (Inglés)

Nombre: Yubii Home
Fabricante:FIBARO
Identificador:YH-001
Número de Certificación Z-Wave:ZC12-21030191
Plataforma Hardware:EFR32Z
FLiRS:NO
Tipo de Role:Central Static Controller
Descripción Corta:Yubii Home is the core element of the Smart Home system. It enables the integration of smart home devices into a single system to provide convenient control and a powerful automation platform.
Descripción:Yubii Home is the core element of the Smart Home system. It enables the integration of smart home devices into a single system to provide convenient control and a powerful automation platform. - Provides a reliable and secure foundation for Smart Home system, - Capable of controlling compatible devices using the following radio standards: - Z-Wave (700 series), - Wi-Fi – 2.4 GHz (802.11 b/g/n), - Nice FLOR, OPERA and PLN2+. - Allows to add up to: - 40 Z-Wave devices (recommended), - 40 Nice devices, - 1 IP camera, - 20 scenes, - 10 Quick Apps, - 5 plugins. - No Internet cable required, works on Wi-Fi, - Modern interface designed for ease of use, - Enhanced and convenient scene editor, - Support for more advanced apps and drivers, - May be used with all devices certified with the Z-Wave Plus certificate and should be compatible with such devices produced by other manufacturers.

Descargue el manual desde aquí.

Grupo
Max Nodos
Descripción
1
1
"Lifeline" reports the device status and allows for assigning single device only (main controller by default).
Número
Tamaño (Bytes)
Valor por Defecto
Nombre
Descripción
Application Status
COMMAND_CLASS_APPLICATION_STATUS
Association Group Information V3
COMMAND_CLASS_ASSOCIATION_GRP_INFO_V3
Association V2
COMMAND_CLASS_ASSOCIATION_V2
Basic V2
COMMAND_CLASS_BASIC_V2
Central Scene V3
COMMAND_CLASS_CENTRAL_SCENE_V3
Clock
COMMAND_CLASS_CLOCK
COMMAND_CLASS_BATTERY_V2
COMMAND_CLASS_BATTERY_V2
COMMAND_CLASS_METER_V6
COMMAND_CLASS_METER_V6
COMMAND_CLASS_THERMOSTAT_FAN_MODE_V5
COMMAND_CLASS_THERMOSTAT_FAN_MODE_V5
Configuration V4
COMMAND_CLASS_CONFIGURATION_V4
CRC16 Encapsulation
COMMAND_CLASS_CRC_16_ENCAP
Device Reset Locally
COMMAND_CLASS_DEVICE_RESET_LOCALLY
Door Lock V4
COMMAND_CLASS_DOOR_LOCK_V4
Firmware Update Meta-Data V5
COMMAND_CLASS_FIRMWARE_UPDATE_MD_V5
Inclusion Controller
COMMAND_CLASS_INCLUSION_CONTROLLER
Indicator V3
COMMAND_CLASS_INDICATOR_V3
Manufacturer Proprietary
COMMAND_CLASS_MANUFACTURER_PROPRIETARY
Manufacturer Specific V2
COMMAND_CLASS_MANUFACTURER_SPECIFIC_V2
Multi-Channel Association V3
COMMAND_CLASS_MULTI_CHANNEL_ASSOCIATION_V3
Multi-Channel V4
COMMAND_CLASS_MULTI_CHANNEL_V4
No Operation
COMMAND_CLASS_NO_OPERATION
Notification V8
COMMAND_CLASS_NOTIFICATION_V8
Protection V2
COMMAND_CLASS_PROTECTION_V2
Scene Activation
COMMAND_CLASS_SCENE_ACTIVATION
Scene Controller Conf
COMMAND_CLASS_SCENE_CONTROLLER_CONF
Schedule V2
COMMAND_CLASS_SCHEDULE_V2
Security S0
COMMAND_CLASS_SECURITY
Security S2
COMMAND_CLASS_SECURITY_2
Sensor Alarm
COMMAND_CLASS_SENSOR_ALARM
Sensor Binary V2
COMMAND_CLASS_SENSOR_BINARY_V2
Sensor Multilevel V11
COMMAND_CLASS_SENSOR_MULTILEVEL_V11
Sound Switch
COMMAND_CLASS_SOUND_SWITCH
Switch Binary V2
COMMAND_CLASS_SWITCH_BINARY_V2
Switch Color V3
COMMAND_CLASS_SWITCH_COLOR_V3
Switch Multilevel V4
COMMAND_CLASS_SWITCH_MULTILEVEL_V4
Thermostat Fan Mode V4
COMMAND_CLASS_THERMOSTAT_FAN_MODE_V4
Thermostat Fan State V2
COMMAND_CLASS_THERMOSTAT_FAN_STATE_V2
Thermostat Mode V3
COMMAND_CLASS_THERMOSTAT_MODE_V3
Thermostat Operating State V2
COMMAND_CLASS_THERMOSTAT_OPERATING_STATE_V2
Thermostat Setpoint V3
COMMAND_CLASS_THERMOSTAT_SETPOINT_V3
Transport Service V2
COMMAND_CLASS_TRANSPORT_SERVICE_V2
User Code
COMMAND_CLASS_USER_CODE
Version V3
COMMAND_CLASS_VERSION_V3
Wake Up V2
COMMAND_CLASS_WAKE_UP_V2
Z-Wave Plus Info V2
COMMAND_CLASS_ZWAVEPLUS_INFO_V2
Application Status
COMMAND_CLASS_APPLICATION_STATUS
Association Group Information V3
COMMAND_CLASS_ASSOCIATION_GRP_INFO_V3
Association V2
COMMAND_CLASS_ASSOCIATION_V2
CRC16 Encapsulation
COMMAND_CLASS_CRC_16_ENCAP
Device Reset Locally
COMMAND_CLASS_DEVICE_RESET_LOCALLY
Firmware Update Meta-Data V5
COMMAND_CLASS_FIRMWARE_UPDATE_MD_V5
Inclusion Controller
COMMAND_CLASS_INCLUSION_CONTROLLER
Indicator V3
COMMAND_CLASS_INDICATOR_V3
Manufacturer Specific V2
COMMAND_CLASS_MANUFACTURER_SPECIFIC_V2
Multi-Channel Association V3
COMMAND_CLASS_MULTI_CHANNEL_ASSOCIATION_V3
Multi-Command
COMMAND_CLASS_MULTI_CMD
Network Management Basic V2
COMMAND_CLASS_NETWORK_MANAGEMENT_BASIC_V2
Network Management Inclusion V3
COMMAND_CLASS_NETWORK_MANAGEMENT_INCLUSION_V3
Network Management Installation and Maintenance V2
COMMAND_CLASS_NETWORK_MANAGEMENT_INSTALLATION_MAINTENANCE_V2
Network Management Proxy V2
COMMAND_CLASS_NETWORK_MANAGEMENT_PROXY_V2
Node Provisioning
COMMAND_CLASS_NODE_PROVISIONING
Powerlevel
COMMAND_CLASS_POWERLEVEL
Security S0
COMMAND_CLASS_SECURITY
Security S2
COMMAND_CLASS_SECURITY_2
Supervision
COMMAND_CLASS_SUPERVISION
Time
COMMAND_CLASS_TIME
Transport Service V2
COMMAND_CLASS_TRANSPORT_SERVICE_V2
Version V3
COMMAND_CLASS_VERSION_V3
Z-Wave Plus Info V2
COMMAND_CLASS_ZWAVEPLUS_INFO_V2
Where to find S2 DSK on product
In case you need full DSK code of the gateway you will find it on the label

under the device.
Controller Classic Exclusion
4.1: REMOVING DEVICES USING EXCLUSION MODE

To remove the device from the this or other Z-Wave network:

1. Open the Configuration Interface.

2. Go to [gearwheel image] > Devices.

3. Click ["-" image].

4. Select Z-Wave Device.

5. Follow removing procedure on the device (according to its manual).
Controller Classic Inclusion
3.1: ADDING USING INCLUSION MODE

To add the device to the Z-Wave network manually:

1. Open the Configuration Interface.

2. Go to [gearwheel image] > Devices.

3. Click ["+" image].

4. Select Z-Wave Device.

5. There are few available settings:

• NWI - Network-Wide Inclusion – enabling allows for adding devices

outside the direct range of the gateway,

• Add in S2 Security mode if device supports it,

• Allow inclusion only in near proximity (less than 2 meters).

6. Click Start adding.

7. Follow adding procedure for the device you want to add (according to

its manual).

8. If you are adding in Security S2 Authenticated and the device is not on

the Provisioning List (see chapter 5 on page 10):

Input the PIN code (the underlined part of the DSK) and click Send.

9. The device will be added within few minutes.
Controller SmartStart Inclusion
3.2: ADDING USING SMARTSTART

SmartStart enabled devices can be added into a Z-Wave network by

entering the Z-Wave DSK Code present on the product. The devices will

be automatically added to the Z-Wave network using secure connection

encrypted with Z-Wave S2 security framework.

To add the device to the Z-Wave network using SmartStart:

1. Open the Configuration Interface.

2. Go to [gearwheel image] > Z-Wave > Smart Start.

3. Click Add DSK.

4. Enter the full DSK string code you have received with your device.

5. For advanced users: In Choose Security levels select which Security

keys will be granted to the joining node (available: S2 Unauthenticated,

S2 Authenticated, S2 Access Control, S0).

6. Leave the Only S2 classic inclusion unchecked.

7. Power the device and it will be added automatically within 10 minutes.
Controller Provisioning List
5: MANAGING PROVISIONING LIST

The Provision List is used to add Z-Wave devices using SmartStart or

bootstrap classic S2 inclusion.

5.1: ADDING DEVICES TO PROVISIONING LIST

1. Open the Configuration Interface.

2. Go to [gearwheel image] > Z-Wave > Smart Start.

3. Click Add DSK.

4. Enter the full DSK string code you have received with your device.

5. For advanced users: In Choose Security levels select which Security

keys will be granted to the joining node (available: S2 Unauthenticated,

S2 Authenticated, S2 Access Control, S0).

6. If the device should not be automatically included when powered, but

only after the classic inclusion, check the Only S2 classic inclusion

setting.

7. Click Add.

5.2: EDITING DEVICES IN PROVISIONING LIST

1. Open the Configuration Interface.

2. Go to [gearwheel image] > Z-Wave > Smart Start.

3. Click [pen image] next to the device you want to edit.

4. You can change the Security levels.

5. Save.

5.3: REMOVING DEVICES FROM PROVISIONING LIST

1. Open the Configuration Interface.

2. Go to [gearwheel image] > Z-Wave > Smart Start.

3. Click [trash can image] next to the device you want to remove.

4. Click Delete.

5. The device will be removed from the list, but if it was already added to

the Z-Wave network, you must perform standard removing procedure

or reset the device.
Controller Learn Mode
9.1: ADDING/REMOVING TO/FROM EXISTING Z-WAVE

NETWORK

This gateway can be added to an existing Z-Wave network only if no

Z-Wave devices are added to it.

1. Start adding/removing procedure on the primary controller (according

to its manual).

2. Go to [gearwheel image] > Z-Wave.

3. Under Start Learn Mode click Start

4. If you are prompted for the PIN, you will find it on the bottom of the

gateway and on the box.
Controller Replication
Copying information from this controller to the secondary

controller

1. Start adding procedure according to chapter “Adding using Inclusion

Mode” on page 7.

2. Start Learn Mode on the secondary controller (according to its

manual).

3. After couple of minutes both controllers will have the same network

information.
Factory Reset Procedure
10: RESETTING TO FACTORY DEFAULTS

10.1: RESETTING SYSTEM TO FACTORY DEFAULTS

! Caution! The whole configuration will be removed and

lost if not backed up.

This feature allows you to restore the whole system to factory settings. It

means the factory software version will be restored and all data from the

system A and B will be deleted (users, devices, scenes etc.).

If the gateway is set as Z-Wave secondary controller use this procedure

only when the primary controller is missing or otherwise inoperable.

1. Open the Configuration Interface.

2. In the top right corner click user name

3. Choose Recovery Mode from the menu.

4. Confirm.

5. Wait for the system to reboot, the LED indicator will be pulsing red.

6. When the LED indicator turns solid red, refresh the browser tab.

7. Click Factory Reset under Network Status section.

8. Check “Yes, I’m sure and I know what I’m doing” checkbox.

9. Confirm.

10.2: RESETTING Z-WAVE TO FACTORY DEFAULTS

Resetting the Z-Wave network removes all the Z-Wave devices from the

gateway’s memory, but the other data remains unchanged. Scenes that

used Z-Wave devices will not work anymore.

1. Open the Configuration Interface.

2. Go to [gearwheel image] > Z-Wave.

3. Under Reset Z-Wave click Reset.

4. Confirm.
Capability Rediscovery
8: REDISCOVERING Z-WAVE DEVICES

Rediscovery – the process of reading the device’s capabilities after altering

them.

1. Open the Configuration Interface.

2. Go to [gearwheel image] > Devices.

3. Click the device to expand it.

4. Go to Device configuration tab.

5. Under Device reconfiguration click Reconfigure device.

6. If the device is battery powered, wake it up manually or wait for next

automatic wake up.
S2 Access Control
S2_ACCESS_CONTROL
S2 Authenticated
S2_AUTHENTICATED
S2 Unauthenticated
S2_UNAUTHENTICATED
Color
If the product is only available in one color, pick the color from the list.

 

Opiniones

Escribe tu opinión

Nice Yubii Home - Controlador domótico Z-Wave Plus v2 (Serie 700) y radio Nice-Elero

Nice Yubii Home - Controlador domótico Z-Wave Plus v2 (Serie 700) y radio Nice-Elero

Controlador domótico híbrido Z-Wave Plus v.2 (Serie 700) y radiofrecuencia Nice / elero.

Accesorios, complementos y/o alternativas

17 otros productos de la misma categoría:

Los clientes que compraron este producto también han comprado...