Make your wired devices smart with...
Make your wired devices smart with the Zigbee I/O module with 4 dry contact inputs + 2 NO/NC outputs (ON/OFF or pulse).
Warning: Last items in stock!
Out of stock
With the Zigbee Digital IO Module, you can connect conventional wired devices to a Zigbee network, allowing your devices to communicate and receive information wirelessly.
The IO module can be connected to a wide range of devices. For example, the IO module can be connected to a heat pump and activated when other devices in the building do not require as much electricity. This reduces the load on the electrical network. Connected to an access system, the IO module allows wireless control of automatic doors through a Zigbee home automation controller.
The IO Module is also interoperable with other Zigbee devices, allowing for example to connect blinds to a Zigbee Motion Sensor, so that the blinds close when the sensor detects high light. The IO module could also be connected to an electrical system that lifts a door or window open slightly when an air quality or humidity sensor detects high humidity levels.
Additionally, each input can also be configured as an IAS alarm to connect wired alarm systems and sensors to the Zigbee network.
The module's small size allows you to enhance the versatility and scalability of your wired devices, as it can fit in a wide variety of locations depending on your needs. The Digital IO Module is the optimal tool to keep all your devices connected.
Four digital inputs with dry contact
Two relay outputs with NO and NC contacts
On/off or pulse functionality
Save wiring effort
Remote data collection and control of wired devices
Dimensions: 45 x 45 x 16mm / 1.77 x 1.77 x 0.63in
Weight: 24.8g / 0.87oz (with packaging: 41.5g / 1.46oz)
Power: 6-28VDC (Alternative: uUSB - for example for power bank)
Power consumption: 0.3W
Output power: 12dBm
Operating temperature: 0 to + 50 °C / 32 - 122 °F
Relative humidity: 5 - 95% (non-condensing)
IP class: IP20
Specifications for output
2 NO/NC dry contact outputs - pulse on/off
Maximum switching voltage: 30V
Switch maximum current: 1A
4 dry contact inputs (potential-free switch or relay) NO/NC per SW
Each input can be configured as an IAS alarm
Zigbee home automation
CE, FCC, IC, ISED, RED, RoHS and REACH compliant
Zigbee 3.0 certified