Viewed products





Confianza Online


Micro Smart Plug from NodOn® plug with Z-Wave Plus consumption measurement

MSP-3-1-01

New

Plug for electrical appliances or electrical loads in general. Of technology Z-Wave Plus, with rings of interchangeable colors for a better and easier identification, being a "removable" or portable z-wave plug and being difficult to associate it with a certain stay. It accepts electric charges of up to 1500W and offers monitoring of consumption from our home automation controller.

More details

In Stock

49,90 €

Technical characteristics

Technology Z-Wave Plus
Characteristic Consumption Measurement

More info

The NodOn® Micro Smart Plug power consumption plug is controllable through a Z-Wave network and a Z-Wave or Plus® home automation controller directly or through other Z-Wave or Z-Wave Plus® controllers as remote controls that allow association, such as, SoftRemote, Octan, and other remote controls or Z-Wave actuators. The model that is provided by default is the standard type (Schuko), although it is also available in French (type E).
Based on a completely new design, the Micro Smart Plug from NodOn® is one of the smallest Z-Wave smart plugs in the world, while it has a certificate and CE marking. Interconnected with a domotic central, it stores consumption data (power and energy).

Ultra-Compact

Micro Smart Plug NodOn® is one of the small world smart plugs. This innovative design has made it discreet, practical and very mobile, while remaining compatible with virtually all electrical appliances in the home.

CE Certificate

Micro Smart Plug NodOn® is fully CE certified, according to the latest standard. The product was tested and approved by Intertek, the leading CE certification body in the world.

Smart alarm

In case of alarm, configured by you in advance (intrusion, innodation or other), Micro Smart Plug NodOn® is able to act and notify you at your convenience.

Update "OTA"

Taking advantage of the latest advances in the Z-Wave standard, Micro Smart Plug NodOn® can update its "Over The Air" firmware. This means that whatever time you buy the Micro Smart Plug, you will constantly enjoy new software versions and new features.

Consumption measurement

Thanks to the exclusive Micro Smart Plug NodOn® option, you can analyze your accumulated energy consumption and instantaneous power and reduce your electricity bill.

CHARACTERISTICS
Control a lamp or a remote device
Module plugged directly into a socket and the load you want to control
Compact plug that prevents disuse of adjacent outputs
On / off to control lights or appliances (without changes)
Measure the power consumption of the connected load
Local control through the integrated button
Unique function: test the coverage of the Z-Wave network
Wireless update (OTA)

TECHNICAL CHARACTERISTICS
Power supply: AC 230V +/- 10% - 50 Hz
Maximum power: 1500W (resistive load)
Intrinsic consumption: <1W
Operating temperature 0 ° C to 40 ° C - Altitude: 2000m
Z-Wave radio protocol: 868.4MHz * - 500 Series - compatible with Z-Wave Plus®
Europe * Compatible 868 MHz frequency, China, Singapore, United Arab Emirates, South Africa
Range: 40m 80m indoor / outdoor
Dimensions: 41 * 73mm
2 years warranty

RULES

EN61058 2002 + AE2008: 2008
NF C 61-314 2008 + AE2010: 2010 (Type E)
DIN 0620 -1: 2013 (Schuko)
DIN 0620 -2-1: 2013 (Schuko)
V1.6.1 EN301489-1: 2013
V1.6.1 EN301489-2: 2013
V2.4.1 EN300220-1: 2012
v1.9.2 EN300220-2: 2011

Extended Z-Wave info

Name: Z-Wave Plus Micro Smart Plug ON/OFF
Manufacturer:NodOn
Identifier:MSP-3-1-X1
Z-Wave Certification Number:ZC10-16045035
Hardware Plattform:ZM5202
FLiRS:NO
Role Type:Always On Slave
Short Description:The NodOn Micro Smart Plug is among the world's smallest Z-Wave Smart Plug, offering in addition Power and Energy Metering Capabilities
Description:The NodOn Micro Smart Plug can be controlled by any kind of Z-Wave® (or Z-Wave Plus®) gateway or other Z-Wave® controller (standalone mode) such as the NodOn® Soft Remote or Octan Remote. It existed in both standard, Type E (French) or Schuko (German). Its very small design and volume allow easy integration, without obstructing nearby power holes on a power strip. Furthermore, it can perform Power and Energy Metering. The NodOn Smart Plug is based on brand new 500 series Z-Wave® module from Sigma Designs®, and support all the new features of Z-Wave Plus® standard: Longer range (up to 40m), lower power consumption, higher data rate transmission, and many more new features.

Manual download HERE.

Group
Max Nodes
Description
1
5
Z-Wave Plus® Lifeline: This group is generally used to report information of the Micro Smart Plug to the Main Controller of the networ
2
5
Follow State: When the Micro Smart Plug is switched ON (respectively OFF) using the local button, it will send ON (respectively OFF) command to the associated devices. No command is sent if the Micro Smart Plug is switched ON or OFF wirelessly. This group is configurable through the parameter 3.
3
5
Follow Complementary State: When the Micro Smart Plug is switched ON (respectively OFF) using the local button, it will send OFF (respectively ON) command to the associated devices. No command is sent if the Micro Smart Plug is switched ON or OFF wirelessly.
4
5
Metering - High Threshold - Set ON/OFF: When the Micro Smart Plug reaches over the high threshold of power defined by the configuration parameter, it will send OFF or ON command to the associateddevices. This group is configurable through the parameter 25 and 27.
5
5
Metering - Low Threshold - Set ON/OFF: When the Micro Smart Plug reaches below the low threshold of ower defined by the configuration parameter, it will send OFF or ON command to the associated devices. This group is configurable through the parameters 26 and 27.
6
5
Metering – Report: All the meter reports and notifications triggered by Metering parameters will be reported to the devices present in this group. This group is configurable through the parameters 21, 22, 23 and 24.
Number
Size (Bytes)
Default Value
Name
Description
1
1
2
Default State
This parameter defines the status of the Micro Smart Plug after a power outage or after being plugged.
10
4
0
Alarm 3 Specifications
This parameter is to set the Alarm 3 Specifications. Use the Home Automation Gateway interface or our Alarm set-up form to define the value corresponding to your need.
11
2
0
Alarm 4 Type Configuration
This parameter is to set the Alarm 4 Type. Use the Home Automation Gateway interface or our Alarm set-up form to define the value corresponding to your need.
12
4
0
Alarm 4 Specifications
This parameter is to set the Alarm 4 Specifications. Use the Home Automation Gateway interface or our Alarm set-up form to define the value corresponding to your need.
13
2
0
Alarm 5 Type Configuration
This parameter is to set the Alarm 5 Type. Use the Home Automation Gateway interface or our Alarm set-up form to define the value corresponding to your need.
15
2
0
Alarm 6 Type Configuration
This parameter is to set the Alarm 6 Type. Use the Home Automation Gateway interface or our Alarm set-up form to define the value corresponding to your need.
16
4
0
Alarm 6 Specifications
This parameter is to set the Alarm 6 Specifications. Use the Home Automation Gateway interface or our Alarm set-up form to define the value corresponding to your need.
17
2
0
Alarm 7 Type Configuration
This parameter is to set the Alarm 7 Type. Use the Home Automation Gateway interface or our Alarm set-up form to define the value corresponding to your need.
18
4
0
Alarm 7 Specifications
This parameter is to set the Alarm 7 Specifications. Use the Home Automation Gateway interface or our Alarm set-up form to define the value corresponding to your need.
19
2
0
Alarm 8 Type Configuration
This parameter is to set the Alarm 8 Type. Use the Home Automation Gateway interface or our Alarm set-up form to define the value corresponding to your need.
20
4
0
Alarm 8 Specifications
This parameter is to set the Alarm 8 Specifications. Use the Home Automation Gateway interface or our Alarm set-up form to define the value corresponding to your need.
21
1
10
Power Auto-Sending Report
This parameter will send a power report automatically if the power value changes of x % W (Watt) compared to the last report.
22
2
1840
Overload Report
This parameter will switch off the Micro Smart Plug in case the power is above x W (Watt) and send an alarm to the primary controller. This parameter has the highest execution priority between all the metering configurations for security reason.
23
2
1000
Energy Auto-Sending Report
This parameter will send a new energy report automatically if the energy value changes of x Wh (Watt-hour) compared to the last report.
24
2
3600
Metering Pulse
Whatever other metering reports, this parameter will send one power and one energy report to the lifeline every x s (Seconds).
25
2
20
Power High Threshold
This parameter defines the High Threshold power value.
26
2
5
Power Low Threshold
This parameter defines the Low Threshold power value.
27
1
7
Power Threshold Action
This parameter will define the Micro Smart Plug actions if the power Low and High Threshold are reached. The value may be the sum of available values. For example, if you want: - Power High Threshold Action is enable and sent ON to Group 4(3) - Power Low Threshold Action is enable and sent OFF to Group 5 (4) the parameter value must be 3+4=7.
3
1
3
Follow State
This parameter allows to enable or disable Group 2 & Group 3.
4
1
0
Always ON
This parameter forces the Micro Smart Plug status to be ON. While enable it is not possible to switch OFF the plug (local or wireless).
5
2
0
Alarm 1 Type Configuration
This parameter is to set the Alarm 1 Type. Use the Home Automation Gateway interface or our Alarm set-up form to define the value corresponding to your need.
6
4
0
Alarm 1 Specifications
This parameter is to set the Alarm 1 Specifications. Use the Home Automation Gateway interface or our Alarm set-up form to define the value corresponding to your need.
7
2
0
Alarm 2 Type Configuration
This parameter is to set the Alarm 2 Type. Use the Home Automation Gateway interface or our Alarm set-up form to define the value corresponding to your need.
8
4
0
Alarm 2 Specifications
This parameter is to set the Alarm 2 Specifications. Use the Home Automation Gateway interface or our Alarm set-up form to define the value corresponding to your need.
9
2
0
Alarm 3 Type Configuration
This parameter is to set the Alarm 3 Type. Use the Home Automation Gateway interface or our Alarm set-up form to define the value corresponding to your need.
Application Status
COMMAND_CLASS_APPLICATION_STATUS
Basic
COMMAND_CLASS_BASIC
Inclusion
To include/add to the Z-Wave network, long press during 2 seconds to send several NIF during 30 seconds or a triple press to send a single NIF
Exclusion
To exclude/remove from the Z-Wave network, long press during 2 seconds to send several NIF during 30 seconds or a triple press to send a single NIF
Factory Reset
To reset, long press during more than 5 seconds then release.

Please use this procedure only when the primary controller is missing or otherwise inoperable.
Additional Special Features
Power/Energy metering and Alarm priority management (check user guide for full details)

 

Reviews

Write a review

Micro Smart Plug from NodOn® plug with Z-Wave Plus consumption measurement

Micro Smart Plug from NodOn® plug with Z-Wave Plus consumption measurement

Plug for electrical appliances or electrical loads in general. Of technology Z-Wave Plus, with rings of interchangeable colors for a better and easier identification, being a "removable" or portable z-wave plug and being difficult to associate it with a certain stay. It accepts electric charges of up to 1500W and offers monitoring of consumption from our home automation controller.

Accessories

9 other products in the same category:

Customers who bought this product also bought: