Visonic PowerG alarm KIT: Powermaster 10 Panel + GPRS Module + 2 PIR NEXT CAM

PowerG combines various advanced WL communication technologies and AES encryption method
high reliability. When used in security systems, this combination of
technologies offer unmatched reliability, robustness and transmission range, providing
numerous benefits for professional installers, alarm receiving stations and
end users.

Powermaster-10 Panel Features:

• Two-way communication ensures the greatest control and efficiency in WL communications.
• RF transmission range much higher than the industry standard, which allows installations without repeaters in most cases.
• Very long battery life in almost all PowerG peripherals, between 4-8 years for typical use.
• All devices are configured from the panel, there are no hardware switches and no need to reopen the peripherals, once closed.
• Visible indication of signal quality on the devices (Multicolor LED) allows choosing the optimal installation location without having to go to the panel to read it during assembly.
• Custom configuration of templates, allows configuration of the devices collectively instead of individually.
• Diagnostic tool, indicates the RF quality based on the statistics of the last 24 hours, immediately showing the problems and verifying the status of the installation.
• Powerful tools for Alarm Receiving Centers, such as remote control of all peripherals, Bidirectional control, TEST tests and quality measurements of the connection of all installed wireless elements.
• Multiple frequency channels (4 channels at 868 MHz) with Frequency Hopping Spread Spectrum.
• Communication protected by the AES-128 encryption algorithm.
• Immune to collisions through TDMA technology, synchronized communication similar to that used in WiMAX, GSM and Bluetooth.
  NEXT CAM PG2 detector characteristics
  NEXT CAM PG2 is a PowerG-based wireless bi-directional PIR detector with an integrated color camera, which provides the perfect solution (RealAlarm) for visual alarm verification, both day and night. This detector is normally installed in areas where greater visibility is needed, such as entrances, corridors and stairs. When the alarm system is armed and the PIR sensor detects movement, the detector sends an alarm to the control panel and the camera is activated. The control panel immediately begins sending images of the facilities to the alarm receiving center. By reviewing the images in real time, security personnel can verify the alarm and respond accordingly.
  
  Based on Visonic PowerG technology, NEXT CAM PG2 combines several advanced and field-proven technologies and the highly reliable AES 128 encryption method. This combination of technologies offers an extended range of transmission and battery life, and unmatched benefits for professional installers, central monitoring stations and end users alike.