MCOHome thermostat for fan-coil...
MCOHome thermostat for fan-coil (fan-coils) controlled by Z-Wave for indoor temperature control. Is
Mainly applied to 2-pipe fan coil systems. You can read the room temperature and the local time, and
they automatically control the fan speed according to the temperature difference. The device is of high reliability and practicability
Warning: Last items in stock!
Out of stock
The MCOHome fan coil thermostat is a Z-Wave enabled device for controlling the internal temperature. It is mainly used with a system of 2 tubes in fan-convector units.
It measures the ambient temperature and offers the local time, so it can automatically control the fan speed depending on the temperature difference. This thermostat can be included and used in a Z-Wave network with other devices certified by Z-Wave of any other manufacturer.
Each module works like a wireless repeater with other modules to ensure complete coverage of your home or office.
Thermostat for 2 tube Fancoil
ON / OFF control of a smart 3-speed fan or electric valve
fan mode, heating, cooling
Time and temperature display
Non-volatile memory to store the operating state after a power failure
Compatible Z-Wave More
glaze, modern design
capacitive touch buttons
TECHNICAL CHARACTERISTICS :
Module type: Z-Wave receiver
Material: tempered glass and plastic (alloy PC)
Power supply: 230 V AC, 50 / 60Hz
Maximum load: 3A
Power consumption: <1W
Frequency: 868.42 MHz
Scope: up to 30 meters
Temperature sensor: NTC 15K
Readability: 0.1 ° C
Operating temperature: 0-55 ° C
Temperature adjustment: 5-35 ° C
Dimensions: 86 x 86 x 42 mm
Installation: Wall (vertical) recessed square box 86 x 86 mm